Cf bezel is more shallow, and thinner
Also CF crown is sharper. Pushers wiggle and are sharp.
In my opinion the cf isn't as nice build wise. But the dial is better.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
DAYTONA V3 CLEAN FACTORY 116500 BLACK
- Thread starter Mark1937
- Start date
Also CF crown is sharper. Pushers wiggle and are sharp.
In my opinion the cf isn't as nice build wise. But the dial is better.
Burbizia
Active Member
- 29/8/20
- 300
- 150
- 43
I own a CF V1 (White) and a BT V2 (black),
to me the BT Bezel looks a little better, the white colour of the numbers looks brighter in dark rooms.
Difference in minimum and maybe it could be due to BT being new, but I'm considering the "moltow Paint" on the bezel...
Bro, both cf and btf have platinum on the bezel. Both are near gen. Molotov mod is nowhere near gen.
Looks good!!Today I ordered new Daytona V3 from Li, seems to be correct size counters and very good dial.
I will post the QC photos just received. Meanwhile, I show you the first images I found among my friends
Thank you for the information.they all have the same movement, real clone with all working like genuine
Is the manufacturer or the movement on this 3 daytonas the same? If not, which manufacture you would recoment for reliability and stability?
- 26/12/13
- 4,613
- 3,075
- 113
mistermagoo
Active Member
- 9/8/17
- 360
- 147
- 43
After all the comparisons and evaluations, BTF all (case quality and case shape, bracelet, crystal, pushers) and Clean V3 dial (smaller and less shiny sub dials) seems to be the best combination?!
What abaout the hands (main hands and sub dial hands) Go for BTF or Claen or a mixture?
If youd go ootb Clean V 3 seems to be a bit bettter than BTF, right?
What abaout the hands (main hands and sub dial hands) Go for BTF or Claen or a mixture?
If youd go ootb Clean V 3 seems to be a bit bettter than BTF, right?
muiramas
Aristocrat
- 18/1/17
- 5,977
- 7,762
- 113
michaelle1193
Active Member
- 15/1/20
- 434
- 234
- 43
Hey Mark. Which trust dealer you think available the clean v3? I always order from Li. Had the panda white dial. Now the black oneV3 is creazy for me! ;-)
- 27/8/18
- 271
- 187
- 43
Anybody know where i can get a crystal that looks like gen for the clean 116520 ? Clean crystals are crap compared to gen
- 13/5/16
- 924
- 948
- 93
To my knowledge, there aren't any that resemble the gen. CF is less transparent than Gen and BT are too transparent. I think the CF xtal is closer to gen than BT but I prefer the BT clarity even though it doesn't resemble a gen crystal. However, there seem to be several gen 116520/116500 xtals in the M2M.
That's not true.
Noob is above all the others quality wise. Btf is a different movement finish to the cf one. Winds smoother, is a lot cleaner (no pun intended) and runs better.
When I received my Cf520 Domi told me I should have went for the btf. Sold it. Got a btf.
Cf Crystal is nowhere near gen. It is blurry and looks foggy.
Btf is very close to gen. Almost same quality as noob and noob was the best crystal.
- 27/8/18
- 271
- 187
- 43
Its not really the clarity i care about, its the height of it, sits alot lower than gen thats the first giveaway that its a replica without getting close enough to look at the dial etc
- 25/3/17
- 4,309
- 3,802
- 113
i have 2-3 daytona noob crystals, is it really better than CF? If so I will put it on my CF V3 ;-)
Not just my opinion.
Domi the watchmaker told me the same
when we replaced my gasket I had sourced a gen xtal, he said no need for it.
Noob crystal is perfect, no need to replace.
That's not true.
The 500 glasses sit lower than the 520s.
See gen here
BTF here
Perfect.