-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Clean GMT-II Pepsi updated bezel insert V2/V2s review and comparison
- Thread starter CTime
- Start date
- 13/5/16
- 925
- 951
- 93
Completely stock V3 out at a local metro park:
V2 DD3285 with V3 insert fitted and the latest full AR gen crystal.
Really nice timepiece. May I ask which TD you got it from?Completely stock V3 out at a local metro park:
- 13/5/16
- 925
- 951
- 93
- 21/12/13
- 1,072
- 1,237
- 113
V2 DD3285 with V3 insert fitted and the latest full AR gen crystal.
What do you think about the upgrade? I have the v2 as well and waiting a Xing insert. But on picture I prefer the v3 so I will probably order the insert as well
- 13/5/16
- 925
- 951
- 93
- 8/3/18
- 169
- 161
- 43
Dasselbe hier – aber V2 mit Gen AR xtal (and lip modification, gen date wheel....)
Last edited:
V3 w/ Gen AR xtal in direct sunlight
Which seal did you use for the Gen crystal?Dasselbe hier – aber V2 mit Gen AR xtal (and lip modification, gen date wheel....)
I have tried a 2.7mm from Clark but the second hand rubs against the crystal. 🫣
- 8/3/18
- 169
- 161
- 43
Nikz have used a 2.7 mm on mine and is perfect, no problems with the gen hands he installed, date mag is perfect.Which seal did you use for the Gen crystal?
It is a VcouldnotcarelessGuys did you think it‘s a v3 or v3s?
Serial 2367y2l3
.
you guys are all driving crazy lol
- 13/5/16
- 925
- 951
- 93
I used a clark 2.85mmWhich seal did you use for the Gen crystal?
Can you please post a picture of the side of your watch? I would like to see how much the crystal is above the bezel. Thank you very much
You have to press the seconds hand a hair lower. It has enough room to not touch the minutes doing so. The correct crystal height/overall thickness is achieved with the 2.7 gasketWhich seal did you use for the Gen crystal?
- 8/3/18
- 169
- 161
- 43
- 25/3/17
- 4,415
- 3,926
- 113
- 25/3/17
- 4,415
- 3,926
- 113
