Many thanks @chrisat When the Clean Daytona comes with the 4131 movement, does it always feature the updated dial with thicker subdials, or is it possible that the latest 4131 version still comes with both dial types?
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Clean 126500 Daytona review
- Thread starter m5smg2
- Start date
The DD4131 is available since February, while the subdials have been updated sometimes last year already.
There is a chance that some dealers still have older stock with the SH4131 movement, but large volume dealers like Steve will not have stock that is so old that it comes with the first version of the subdials.
The watch looks like mine, which is from a recent DD4131 batch. On the first version from a year ago, the outer rings of the subdials looked a bit different as far as I remember.
There is a chance that some dealers still have older stock with the SH4131 movement, but large volume dealers like Steve will not have stock that is so old that it comes with the first version of the subdials.
The watch looks like mine, which is from a recent DD4131 batch. On the first version from a year ago, the outer rings of the subdials looked a bit different as far as I remember.
Many thanks for your clear answer, the only thing that disturbs me is this sort of ramp, which is apriori typical of early dials, isn't it? it's clearly visbile on mine but not on other posted pictures. It's clearly visible on mine, but not on the photos posted a few posts before, which are supposed to describe the new version.
- 25/3/17
- 4,408
- 3,916
- 113
All CF are like yours. I sold mine for this. And counters are so far from gen!Many thanks for your clear answer, the only thing that disturbs me is this sort of ramp, which is apriori typical of early dials, isn't it? it's clearly visbile on mine but not on other posted pictures. It's clearly visible on mine, but not on the photos posted a few posts before, which are supposed to describe the new version.
Would anyone like to share some photos of the updated panda? I. Trying to decide if I should pull the trigger.
Except this one is a CLEAN , So the question is, Does my watch have the V2 dial as shown in some of the photos above?
Yes, sorry about that
— rookie mistake. I think there might be a confusion here , because in the post above, it's about a new version of CF that brings improvements to the sub-dials. Ernien's message seems to be comparing the two versions of CF, unless I misunderstood?" don't hesitate to enlighten me 
Yes, it’s comparing the original released version and the newer updated version that was released this January.Yes, sorry about that
- 25/9/22
- 8,168
- 22,764
- 113
This is why I said BTF had a better subdial in some aspects than Clean.
Bobi01
Respected Member
- 2/2/19
- 3,939
- 3,490
- 113
No bro, this was the case with old dials, most of new dials are flat inside like genuine
Bobi01
Respected Member
- 2/2/19
- 3,939
- 3,490
- 113
You are correct, ask for new one because there are many new ones with flat surface inside the subdials which is more genlikeMany thanks for your clear answer, the only thing that disturbs me is this sort of ramp, which is apriori typical of early dials, isn't it? it's clearly visbile on mine but not on other posted pictures. It's clearly visible on mine, but not on the photos posted a few posts before, which are supposed to describe the new version.
Bobi01
Respected Member
- 2/2/19
- 3,939
- 3,490
- 113
There is obvious difference as i said, the left one is much better and closer to gen, flat surfaceYes, sorry about that
Hello Guys, since I heard about an improved version of the Clean 126500 (see below) I've had to give a RL and ask my TD to get me a 126520 from the latest batch... unfortunately he tells me he can't find any... I'm pretty disgusted. If anyone here knows if any of the TDs have them in stock, please let me know
Sorry, just a mistake , that's what I meant
Hello Guys, since I heard about an improved version of the Clean 126500 (see below) I've had to give a RL and ask my TD to get me a 126500 from the latest batch... unfortunately he tells me he can't find any... I'm pretty disgusted. If anyone here knows if any of the TDs have them in stock, please let me know
DonkeyHoTay
Cockwomble Misfire Specialist
This thread has me thinking I should upgrade from my Clean Panda 116500 to a Clean Panda 126500... this place ... man....
- 23/8/07
- 6,652
- 8,641
- 113
Hi friend. No mention of your which TD is. Although they are all trusted and all professional in every sense, reach out to @CTime for this one
- 25/9/22
- 8,168
- 22,764
- 113
Disgusted at a TD being honest saying they cant get what they want 
i swear rep buyers are some of the most dramatic people ever
i swear rep buyers are some of the most dramatic people ever