BP Seadweller.. Best SD available Period

[Thrasher]

is it an eta but just better?

 

[Thrasher]

Genuine Tag Heuer Calibre 5 Movement just bought for my BPSD [emoji23][emoji1305]


Gesendet von iPhone mit Tapatalk Pro

This is great the movement is always the weak link. Congrats, I was really considering buying some swiss 2824s for my TCs but now with Tickleshoes, Yuki and JF I might very well be going Yuki 3135 in all my TCs

 

[iPwnage]

No, it's an Sellita SW220-1 basically[emoji28] I dont know the exact quality grade, but I guess it's elaboré or top [emoji28]


Gesendet von iPhone mit Tapatalk Pro

 

[mrsub]

@Maron dont spoon feed the trolls and shills.

May I ask why it was spoon feeding? I had a serious question and I just want someone to confirm my guess, that's all.

 

[Turbo350z]

I think ado has put a yuki in turbo350z bpsd. But I imagine it would require modifying of the case.

Sent from my SM-G900W8 using Tapatalk

I have a yuki in mine with no mods. Also, Rudy put gen 3135 in his with no Mods. But it won't work in every case. Some cases have been reported to not fit.




Sent from my iPhone using Tapatalk Pro

 

[Maron]

I have a yuki in mine with no mods. Also, Rudy put gen 3135 in his with no Mods. But it won't work in every case. Some cases have been reported to not fit.




Sent from my iPhone using Tapatalk Pro

Thanks for sharing that info with us. Now do your bpsd a favor and give it some wrist time, I expect to see some wristies soon

Sent from my SM-G900W8 using Tapatalk

 

[mrsub]

I just received my BPSD with these mods: Gen swiss ETA, TC dial, hands, bracelet, , DWO v4, gen crown and tube and gen insert.

Daaamn this is the nicest watch I have ever had!!!! The crown action is soo silky smooth, everything is so crisp and perfect. It's a dream I tell ya! The bezel action is quite stiff and clicks really really loud, but at some place the bezel click gets quiter and then loud again. I assume that it still has a bit clue under the bezel. Is there a safe way to pop the bezel without ruining the bezel? I watched a few videos but it looks so brutal to me.. Since I have to remove the bezel to clean the glue, is it worth it to remove the insert without bending it? The pearl is a fraction of a mm to the left, so i would reglue the insert.

Thanks everyone especially Maron and ado who gave me a lot of advises!

 

[Pavo]

I just received my BPSD with these mods: Gen swiss ETA, TC dial, hands, bracelet, , DWO v4, gen crown and tube and gen insert.

Daaamn this is the nicest watch I have ever had!!!! The crown action is soo silky smooth, everything is so crisp and perfect. It's a dream I tell ya! The bezel action is quite stiff and clicks really really loud, but at some place the bezel click gets quiter and then loud again. I assume that it still has a bit clue under the bezel. Is there a safe way to pop the bezel without ruining the bezel? I watched a few videos but it looks so brutal to me.. Since I have to remove the bezel to clean the glue, is it worth it to remove the insert without bending it? The pearl is a fraction of a mm to the left, so i would reglue the insert.

Thanks everyone especially Maron and ado who gave me a lot of advises!

Let's see some photos

 

[Maron]

I just received my BPSD with these mods: Gen swiss ETA, TC dial, hands, bracelet, , DWO v4, gen crown and tube and gen insert.

Daaamn this is the nicest watch I have ever had!!!! The crown action is soo silky smooth, everything is so crisp and perfect. It's a dream I tell ya! The bezel action is quite stiff and clicks really really loud, but at some place the bezel click gets quiter and then loud again. I assume that it still has a bit clue under the bezel. Is there a safe way to pop the bezel without ruining the bezel? I watched a few videos but it looks so brutal to me.. Since I have to remove the bezel to clean the glue, is it worth it to remove the insert without bending it? The pearl is a fraction of a mm to the left, so i would reglue the insert.

Thanks everyone especially Maron and ado who gave me a lot of advises!

Where did you get yours? Please post some photos!

Sent from my SM-G900W8 using Tapatalk

 

[kdo2milger]

I have a yuki in mine with no mods. Also, Rudy put gen 3135 in his with no Mods. But it won't work in every case. Some cases have been reported to not fit.




Sent from my iPhone using Tapatalk Pro

Good to see you sharing wrist time again brotha :thumbsup:

 

[kdo2milger]

I just received my BPSD with these mods: Gen swiss ETA, TC dial, hands, bracelet, , DWO v4, gen crown and tube and gen insert.

Daaamn this is the nicest watch I have ever had!!!! The crown action is soo silky smooth, everything is so crisp and perfect. It's a dream I tell ya! The bezel action is quite stiff and clicks really really loud, but at some place the bezel click gets quiter and then loud again. I assume that it still has a bit clue under the bezel. Is there a safe way to pop the bezel without ruining the bezel? I watched a few videos but it looks so brutal to me.. Since I have to remove the bezel to clean the glue, is it worth it to remove the insert without bending it? The pearl is a fraction of a mm to the left, so i would reglue the insert.

Thanks everyone especially Maron and ado who gave me a lot of advises!

You do know you can't just come in here with all that mouth watering talk, and no pics...

I use a simple kitchen butter knife and painters blue masking tape on the bottom right lug, and gently, but firmly pry upwards, and also using it in a "wiggly" fashion. Take care when doing so, so as not to have the springbar fly across the room.

 

[Thrasher]

Congratulations, Who did the Mods. I really look forward to seeing pictures, Sorry I was harsh on you but I thought you might be a shill for a certain group I cant stand. That was very fast, you must have been working on it since the day you joined!

I just received my BPSD with these mods: Gen swiss ETA, TC dial, hands, bracelet, , DWO v4, gen crown and tube and gen insert.

Daaamn this is the nicest watch I have ever had!!!! The crown action is soo silky smooth, everything is so crisp and perfect. It's a dream I tell ya! The bezel action is quite stiff and clicks really really loud, but at some place the bezel click gets quiter and then loud again. I assume that it still has a bit clue under the bezel. Is there a safe way to pop the bezel without ruining the bezel? I watched a few videos but it looks so brutal to me.. Since I have to remove the bezel to clean the glue, is it worth it to remove the insert without bending it? The pearl is a fraction of a mm to the left, so i would reglue the insert.

Thanks everyone especially Maron and ado who gave me a lot of advises!

 

[Thrasher]

Beautiful Brother, Mine should be done in April and back in my hands.

I have a yuki in mine with no mods. Also, Rudy put gen 3135 in his with no Mods. But it won't work in every case. Some cases have been reported to not fit.




Sent from my iPhone using Tapatalk Pro

 

[brenth561]

I just placed an order with Lucy for mine. I told her I wanted a BP SD 16600. Price was around $254 with shipping to CONUS.

She said it is coming with Asian clone movement... Is this the one I want ?

 

[mrsub]

I'm sorry guys.. This is the best photo I can offer.. I will take better pictures under daylight

Please note that the watch has no scratches yet, it just looks dirty and worn ( vintage!) under artificia light.

Hanging around


yeah the picture looks cool but the watch itself looks really abused. I will upload more fotos tomorrow!

Congratulations, Who did the Mods. I really look forward to seeing pictures, Sorry I was harsh on you but I thought you might be a shill for a certain group I cant stand. That was very fast, you must have been working on it since the day you joined!

No worries, I am sorry because it is none of my business

 

[Maron]

I'll take some proper ones later

Sent from my SM-G900W8 using Tapatalk

 

[mrsub]

Pictures can never show the real beauty of the watch. It looks amazing from every angle :drool:

At first, I worried about the hollow links and the oyster clasp because I liked the 6 digits bracelet so much, but when I put on the bracelet.. Damn.. Best thing everrr

 

[Timmetje83]

Sent from the RWI mobile app

 

[iPwnage]

Awesome! Now I am just waiting for my TC Parts, then I think @ado213 can do his magic! [emoji3]


Gesendet von iPhone mit Tapatalk Pro

 

[kdo2milger]

Awesome! Now I am just waiting for my TC Parts, then I think @ado213 can do his magic! [emoji3]


Gesendet von iPhone mit Tapatalk Pro

Can we see the balance wheel area please, where the ID number usually is