-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Bezel and Dial Review of ZZF V2S 116610LV Submariner and Comparison vs. Gen, ARF V3 and Noob V10
- Thread starter jtimewatch
- Start date
V2S taken today under rainy weather, love this green.
Envoyé de mon ELE-L29 en utilisant Tapatalk
Envoyé de mon ELE-L29 en utilisant Tapatalk
- 12/3/18
- 34,664
- 66,763
- 113
which one is GEN? ... guess what
It would be a little harder with a hand hiding the X flaw and at an angle that doesn't show crystal distortion.
which one is GEN? ... guess what
I'll say the one on the right is the gen. The crown lugs on the one on the left are a dead giveaway (although hard to see the crown lugs on the one on the right so I hope I'm right
).only good thing about this watch are: BEZEL AND DIAL (obviously the famous VR movement) everything else is to be thrown in the toilet
Lucal
Known Member
- 10/6/18
- 132
- 70
- 28
That's a bullshit bro
- 25/3/17
- 4,310
- 3,802
- 113
I have a problem on my Hulk, the ferrule remains raised by 1mm, if I try to push I feel that it has play as if it were not stuck well, and I can also see that the glass is flush with the ferrule and does not protrude at all.
what should I do?
what should I do?
Remove the bezel. And put the ring down, and instal everything again.I have a problem on my Hulk, the ferrule remains raised by 1mm, if I try to push I feel that it has play as if it were not stuck well, and I can also see that the glass is flush with the ferrule and does not protrude at all.
what should I do?
Its easy but need take care.
Enviado de meu SM-G975F usando o Tapatalk
- 25/3/17
- 4,310
- 3,802
- 113
Is it simple? Maybe I ask my watchmaker to adjust it. Are you sure is not a ring problem? :-(
Last edited:
So, it looks like this is a very common issue with the ZZF bracelet. Same for mine. My advice is to soak the bracelet overnight in WD40 solution. Then turn the screwhead anti clockwise and the closewise repeatedly. Do this procedure till the screws loosen off. A good screw driver is also essential.
No such issue though with ARF bracelet at ALL. That is why I love the ARF bracelets.
- 9/9/19
- 2,283
- 1,682
- 113
Mr Heuristics
Known Member
Lol.
Goddamn, crow.
You don't f*** around.
I'd love to see you order fast food.
"The sweet and sour sauce is good but you can fuck off straight to hell with those McNuggets."
At the end of the day, it's all fast food. Enjoy your Happy Meal. It is what it is.
Kalev007
I'm Pretty Popular
- 25/6/19
- 1,795
- 3,297
- 113
I actually have the opposite issue with mine. They won't stay secured and turn themselves out while wearing. Had the same problem with my ARF v3 as well. Probably my fault as I don't have the right screw driver and are not able to secure them properly.
I should receive another new ZZF next week so let's how it is on that one.
Lucal
Known Member
- 10/6/18
- 132
- 70
- 28
Ahahahha what do you want to hear? You don't get it yourself? Bracelet is good and has a very nice finish sels on most examples (mine not) are perfect with no gaps and perfect recession like gen do you know how much that tight tolerances costs? We are talking about a 500$ watch with one of the best clone movement you can get. Dial is good i ve seen mine go black and green at the same time even under sunlight.. bezel its a work of art almost indistinguishable from the gen even side by side. markers very good and shaped like gen, lume very good too. Its quicker to tell his flaws that are only lugs shape, fat cgs, the "x", pearl color but no one of these its an easy tell. Imo if they fix the pearl this watch with a gen xtal and dw its a nwbig
if you don't understand that the case and the bracelet are cheap really, then withdraw this hobby is not for you
Lucal
Known Member
- 10/6/18
- 132
- 70
- 28
You dont know what you are saying.. i think this hobby is not for you go get another gen