d3s19n
Renowned Member
- 12/6/18
- 646
- 518
- 93
Yeah I hope they fix the serial spacing. Waiting for that and a superclone to buy the 114060
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Bezel and Dial Review of ZZF V2S 116610LV Submariner and Comparison vs. Gen, ARF V3 and Noob V10
- Thread starter jtimewatch
- Start date
Yeah I hope they fix the serial spacing. Waiting for that and a superclone to buy the 114060
Kalev007
I'm Pretty Popular
- 25/6/19
- 1,795
- 3,297
- 113
This is the QC that I accepted. The X issues isn’t present on it.
Sent from my iPhone using Tapatalk
Most probably clasp code as well in upper case than - C4R.
Last but no least sunburst can be (MUCH) wider depending of the angle !
s10e no flash auto mode
Last edited:
- 9/9/19
- 2,283
- 1,682
- 113
Nothing special about this watch, overhyped. Noob v10s and arf is better imo. Would take this insert and movement tho.
Interesting take. Seems to counter most of the other opinions on here but to each his own. Would never pay the ridiculous prices for noob for the minimal if any gains compared to the other watches
Sent from the RWI App
I realize I am in the minority here (and will most likely get blasted by this post) but I tend to agree as well. I continue to see posts about this watch but then see comments such as ARF bracelet is better, ARF bezel movement is better etc. etc.. And don't get me started on the crown lugs on this watch. Is the dial color good - yes. Is the insert color good - yes. But quite frankly, I don't see that much difference between the ZZF and the ARF (at least from the pics I have seen on this forum). That being said, all the reps have flaws in some form or another. So it's GREAT that we have so many choices to chose from.
ZZF on left, ARF on right.
ARF V3's
This is the QC that I accepted. The X issues isn’t present on it.
Sent from my iPhone using Tapatalk
could you please help me clarify what is the X issue?
The right foot on the X in ROLEX was wrong in the early batches. Scrool back, there are plenty of comparison pictures.
- 25/3/17
- 4,310
- 3,802
- 113
Can anyone please tell me if pressing the ring on one side feels it goes down? as if he were to sit lower. If I push I feel that the ring goes down, if I release it goes up. all of half a millimeter, very little but it annoys me. does it also to you?
LuoIsBoss
I'm Pretty Popular
When you are reffering to the bezel? Of course it will go down, if you press it - and go up if you release.
There is springs under the bezel.
- 25/3/17
- 4,310
- 3,802
- 113
It seems to me too relieved from the cash register. even the glass seems flush with the frame, it does not protrude even a little. Is it normal this space between case and bezel?
Kalev007
I'm Pretty Popular
- 25/6/19
- 1,795
- 3,297
- 113
It seems to me too relieved from the cash register. even the glass seems flush with the frame, it does not protrude even a little. Is it normal this space between case and bezel?
Mine seems to be same but isn't it in same with gens as well that the crystal sits flush with the bezel?
Last edited:
- 25/3/17
- 4,310
- 3,802
- 113
My gen does not have a gap like that, and the crystal is not flush, its raised a tiny bit