Wingding1984
Forum Pervert
- 15/7/17
- 440
- 1,131
- 93
the word
Give me a moment, it takes a few minutes for me to unfurl my massive manhood...........#deluded....#unrealistic.....
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Beware of Me - InTimeWatch's Disastrous Experience.
- Thread starter mister twister
- Start date
Give me a moment, it takes a few minutes for me to unfurl my massive manhood...........#deluded....#unrealistic.....
Thank you to the usual suspects for the entertainment as always. OP may not be a real person, however he's still a twat.Don’t say that.
I see most of the usual suspects in this thread. We all flock to such threads.
We love those paid entertainers secretly sponsored by the mods to liven up the forum to allow us to vent.
I cannot imagine OP to be a real person convinced that this line of arguments will sway public opinion his way. Nah, not likely.
@mister twister
You are not getting any support from members because you didn't spend many weeks reading, so you know what you are doing and what to expect. There are many levels of quality for most of the Reps. You have the cheapies and the best Reps. When you receive a watch with problems, you should send it out locally for service. Never send it back to China. The local service is the cost of buying Reps. I have bought more Reps than I will admit.
You are not getting any support from members because you didn't spend many weeks reading, so you know what you are doing and what to expect. There are many levels of quality for most of the Reps. You have the cheapies and the best Reps. When you receive a watch with problems, you should send it out locally for service. Never send it back to China. The local service is the cost of buying Reps. I have bought more Reps than I will admit.
Wingding1984
Forum Pervert
- 15/7/17
- 440
- 1,131
- 93
I don't pull women, I lasso them............#wishful thinking
Wingding1984
Forum Pervert
- 15/7/17
- 440
- 1,131
- 93
On this watch with a 7750 the TD states, "Auto Movement Asia-7750, 28800bph with fully Functional Chronograph" does this mean the stop watch works and the 3 sub dials?
Can someone elaborate so I don't get in the awkward embarrassing position when I hope to purchase this watch some day. I am not sure what this means "fully Functional Chronograph".
www.theonewatches.ws
Can someone elaborate so I don't get in the awkward embarrassing position when I hope to purchase this watch some day. I am not sure what this means "fully Functional Chronograph".
Breitling Chronomat B01 Grey RG/SS 42mm GF Asia-7750 | Theonewatches.ru
Breitling Chronomat B01 Grey RG/SS 42mm GF Asia-7750 - - - GF New Breitling Chronomat, Double deployant buckle, Roller ball stainless steel bracelet also called Bullet bracelet All-in-one treatment , high recognition of the mechanical skill Case Vertica
www.theonewatches.ws
Being a 7750 it should mean that all the subdials work as per the Genuine, but my advice is to ask Steve to be sure.
This thread is a good example of a dickhead who bought a Chrono without knowing what he was buying, so Kudos to yourself to ask first
The 7750 chrono's can be fragile, so what I do with any 7750 is wind it on arrival, set time and let the watch settle in running for 10 mins. Now I test the Chrono for 15 to 20 minutes so I can see the Centre sec and the mins run ok also the hour will move slightly too, then STOP IT, reset it and only ever use it very occasionally if you really have to.
NEVER EVER, EVER NEVER EVER EVER press the reset whilst the Chrono itself is running.
I have had lots of 7750's, only had the odd breakages over many years, the first one was a 16+ years old Daytona and I dropped it from a great height onto a concrete floor.
Another is a Blaken Daytona which I bought a pair of them one was advertised as broken, it's awaiting repair, when I get a round tuit, the other working fine,
The common denominator there is Daytona 7750's run the watch seconds @6, whereas Breitlings and others use the native original 7750 seconds @9 position, IMHO that layout is less stressed.
Me personally find it is unusual to see a broken 7750 sec @9 movement, and I put these failures down to operator error at some point in it's life, i.e. they hit reset with it running !!
LOL, others will say avoid a 7750 like the plague, and those truly in the know, will say just don't use it, or like me use it very little.
Looking at the picture in your link, it appears to be that it probably works as per the Gen watch ....
The subdial @9 is not on zero, so I assume that is as it should be i.e. "Watch time seconds".
Centre (Chrono) second hand is zeroed, together with the sub dials at 3 and 9, which if working as Gen they are Chrono minutes @3 and hours @6.
In my purchases from Steve, during QC they do do a brief Chrono run when QC'ing, but you'll be hard pushed to see the hours move after a just a few minutes of running. 5 to 10 mins yes, hrs will obviously have moved a bit, but it's un realistic to ask a busy QC department to run it that long....
My personal experience with Steve is if you ask him you get a decent and truthful answer !!
GLWP
Last edited:
Who the fk is Steve, you retarded dickhead? (Talking in your language, I assume it also resonates with other retarded monkeys like you who use ad hominem proverbs toward a fellow member of this forum)Being a 7750 it should mean that all the subdials work as per the Genuine, but my advice is to ask Steve to be sure.
This thread is a good example of a dickhead who bought a Chrono without knowing what he was buying, so Kudos to yourself to ask first
The 7750 chrono's can be fragile, so what I do with any 7750 is wind it on arrival, set time and let the watch settle in running for 10 mins. Now I test the Chrono for 15 to 20 minutes so I can see the Centre sec and the mins run ok also the hour will move slightly too, then STOP IT, reset it and only ever use it very occasionally if you really have to.
NEVER EVER, EVER NEVER EVER EVER press the reset whilst the Chrono itself is running.
I have had lots of 7750's, only had the odd breakages over many years, the first one was a 16+ years old Daytona and I dropped it from a great height onto a concrete floor.
Another is a Blaken Daytona which I bought a pair of them one was advertised as broken, it's awaiting repair, when I get a round tuit, the other working fine,
The common denominator there is Daytona 7750's run the watch seconds @6, whereas Breitlings and others use the native original 7750 seconds @9 position, IMHO that layout is less stressed.
Me personally find it is unusual to see a broken 7750 sec @9 movement, and I put these failures down to operator error at some point in it's life, i.e. they hit reset with it running !!
LOL, others will say avoid a 7750 like the plague, and those truly in the know, will say just don't use it, or like me use it very little.
Looking at the picture in your link, it appears to be that it probably works as per the Gen watch ....
The subdial @9 is not on zero, so I assume that is as it should be i.e. "Watch time seconds".
Centre (Chrono) second hand is zeroed, together with the sub dials at 3 and 9, which if working as Gen they are Chrono minutes @3 and hours @6.
In my purchases from Steve, during QC they do do a brief Chrono run when QC'ing, but you'll be hard pushed to see the hours move after a just a few minutes of running. 5 to 10 mins yes, hrs will obviously have moved a bit, but it's un realistic to ask a busy QC department to run it that long....
My personal experience with Steve is if you ask him you get a decent and truthful answer !!
GLWP
This thread is about Ryan from InTimeWatch who is a Trusted Dealer that knows nothing about watches, specially AP chronographs, and once realizes that he fked up, just scratches client's returned watch and calls it a day.
You are a genuine retard, cuz after I shared my correspondence with Ryan you are still suggesting to "ask him you get a decent and truthful answer" well you can see that truthful answer I got from him prior to ordering the watch:
Only warning you're getting.Who the fk is Steve, you retarded dickhead? (Talking in your language, I assume it also resonates with other retarded monkeys like you who use ad hominem proverbs toward a fellow member of this forum)
This thread is about Ryan from InTimeWatch who is a Trusted Dealer that knows nothing about watches, specially AP chronographs, and once realizes that he fked up, just scratches client's returned watch and calls it a day.
You are a genuine retard, cuz after I shared my correspondence with Ryan you are still suggesting to "ask him you get a decent and truthful answer" well you can see that truthful answer I got from him prior to ordering the watch:
Make your argument / case without using vulgarity, or you will be removed from the forum, as this type of language towards fellow members will not be tolerated.
Who the Fuxs are you you retarded snot gobbling cock womble steaming pile of cow shite
?I wasn't even discussing that watch / movement with you my post was in reply to TLRAM1 (a decent member here unlike you) who asked a valid question about his possible purchase and I gave him advice.
Steve is "TheOneWatches" twixt the post I replied to referred.
I wouldn't discuss anything with you ya firkin wombat, now pi55 off back from whence tha crawled out from
Hey. No vulgarity
Who the Fuxs are you you retarded snot gobbling cock womble steaming pile of cow shite
I wasn't even discussing that watch / movement with you my post was in reply to TLRAM1 (a decent member here unlike you) who asked a valid question about his possible purchase and I gave him advice.
Steve is "TheOneWatches" twixt the post I replied to referred.
I wouldn't discuss anything with you ya firkin wombat, now pi55 off back from whence tha crawled out from
Please respect the cow
I did, I was referring to the Heilan Coos, who's poop absolutely stinks, do not ask me how I found that out when I had a wee off into a field in my stage rally Puma
- 22/2/24
- 713
- 3,263
- 93
You Sir are not to besmirch the fine Highland Coo. They are above reproach.I did, I was referring to the Heilan Coos, who's poop absolutely stinks, do not ask me how I found that out when I had a wee off into a field in my stage rally Puma
For a guy that “wears only $1k reps” you should know the biggest tell is that that a 7750 Chrono is thick as shit. Bit like the OP…
So many slam dunks in this thread
Like I am watching a youtube vid of Michael Jordan Best Of
Like I am watching a youtube vid of Michael Jordan Best Of
Well that was enjoyable reading for my Friday afternoon.