I don't think there is any review comparison on this yet as I had been trying to search around and finally found one using some possibly "chinese" searching terms and compiled them to imgur for easier access in RWI. As usual, don't mind the watermarks (not mine, not helping them to promote or whatsoever, I think either the author use them as a promotion or "steal" others and watermarked as his (I had heard some rumours on that)) What is in the content (as in pics) which is the most important. I think the gen had been used (which is why there is some "dirt" or "scratches"), the thickness of ZF is slightly thicker compared to gen? (maybe to my eyes), lume is slightly "brighter" green hue on the rep, engraving is lighter on the rep as well and the A7750 movement (balance wheel at 11 o'clock) is nice too. Overall IMO this is a nice replicating. Any opinions from the members are welcome too! Cheers and enjoy!
album compiled here: http://imgur.com/a/0CLbM
the pics are here:
Found similar pics but with "brief" explanation, so as usual will share it here.
the album compiled here: http://imgur.com/a/OeHfC
some sneak peeks and translation by me according to the words on the pics (for the benefit of those who don't understand chinese):
?? (gen), ZF (rep)
red: similar hour and minute hands between the gen and rep
green: similar AR or reflection
the other view:
red: the crown bridge "handle" pulled out are similar in angle
green: logo, second hand, date wheel are similar
red: bezel polished is good on gen and rep
red: sapphire crystal and bezel "sits" the same
red: the "view" from the crystal to the case (it's difficult to differeniate between the gen and rep from the "naked eyes")
gren: crown guard position is similar between gen and rep
red: brushing is good on the rep (comparable to gen)
red: clear caseback crystal
green: the balance wheel (decorated A7750 - p9010) on the rep is the same to the gen p9010 (@11 o'clock)
red: ZF use red "jewels" (imported swiss) on "plates" similar to ETA to make it more difficult to differeniate between the gen and rep
red: overall case and brushing are finished well on the rep (comparable to gen)
green: crystal height is similar
red: the "springbar" and "depth" are similar, and thickness of the bottom case are good on the rep (comparable to gen)
red: engraving on gen is "thick", "blurry" and not sharp but rep is "thin", "clear" and sharp
red: the thickness is the same on gen and rep (15.6mm)
red: the lume on gen is lighter and "darker green" and the rep is brighter and "greener" (imported swiss lume)
similar pics from [MENTION=70225]TimeWillTell[/MENTION]: https://forum.replica-watch.info/vb...-p9010-(zf)?p=3148608&viewfull=1#post-3148608
PAM1312 video: https://www.youtube.com/watch?v=j-URKgFfC1c
PAM1359 video: https://www.youtube.com/watch?v=BG_CU2CIxvA
album compiled here: http://imgur.com/a/0CLbM
the pics are here:
Found similar pics but with "brief" explanation, so as usual will share it here.
the album compiled here: http://imgur.com/a/OeHfC
some sneak peeks and translation by me according to the words on the pics (for the benefit of those who don't understand chinese):
?? (gen), ZF (rep)
red: similar hour and minute hands between the gen and rep
green: similar AR or reflection
the other view:
red: the crown bridge "handle" pulled out are similar in angle
green: logo, second hand, date wheel are similar
red: bezel polished is good on gen and rep
red: sapphire crystal and bezel "sits" the same
red: the "view" from the crystal to the case (it's difficult to differeniate between the gen and rep from the "naked eyes")
gren: crown guard position is similar between gen and rep
red: brushing is good on the rep (comparable to gen)
red: clear caseback crystal
green: the balance wheel (decorated A7750 - p9010) on the rep is the same to the gen p9010 (@11 o'clock)
red: ZF use red "jewels" (imported swiss) on "plates" similar to ETA to make it more difficult to differeniate between the gen and rep
red: overall case and brushing are finished well on the rep (comparable to gen)
green: crystal height is similar
red: the "springbar" and "depth" are similar, and thickness of the bottom case are good on the rep (comparable to gen)
red: engraving on gen is "thick", "blurry" and not sharp but rep is "thin", "clear" and sharp
red: the thickness is the same on gen and rep (15.6mm)
red: the lume on gen is lighter and "darker green" and the rep is brighter and "greener" (imported swiss lume)
similar pics from [MENTION=70225]TimeWillTell[/MENTION]: https://forum.replica-watch.info/vb...-p9010-(zf)?p=3148608&viewfull=1#post-3148608
PAM1312 video: https://www.youtube.com/watch?v=j-URKgFfC1c
PAM1359 video: https://www.youtube.com/watch?v=BG_CU2CIxvA
