mich.bal
Known Member
- 15/5/17
- 143
- 54
- 0
it's against the forum rules until the point u don't have a specific question. Btw i would accept this watch
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
ZF Master Ultrathin Moon
- Thread starter drohalloran
- Start date
it's against the forum rules until the point u don't have a specific question. Btw i would accept this watch
Sorry, I was about to ask about the 12 hour marks, as they seemed a bit curved to me. But I didn't wanted to suggest anything.
Hey all,
Just got the QC picture, read through the forum and haven't came across to this potential issues that I am seeing. I'm wondering if I am nitpicking/ camera angles issues or if these are flaws that I should obtain another one.
https://imgur.com/a/Ofjh67Y
1) The first picture looks ok to me, but the 2nd picture with the left triangle 12 o'clock marker appears to be misaligned with the right triangle. Feels like the left triangle needs to be pushed down a hair so that the ends would be parallel to the right triangle. Not sure if this is a camera angle problem or how light is reflected.
2) The 12 o clock triangle does not align with the bottom triangle at 6 when line is drawn, could be due to bad camera angle?
Thanks for your input!
Just got the QC picture, read through the forum and haven't came across to this potential issues that I am seeing. I'm wondering if I am nitpicking/ camera angles issues or if these are flaws that I should obtain another one.
https://imgur.com/a/Ofjh67Y
1) The first picture looks ok to me, but the 2nd picture with the left triangle 12 o'clock marker appears to be misaligned with the right triangle. Feels like the left triangle needs to be pushed down a hair so that the ends would be parallel to the right triangle. Not sure if this is a camera angle problem or how light is reflected.
2) The 12 o clock triangle does not align with the bottom triangle at 6 when line is drawn, could be due to bad camera angle?
Thanks for your input!
It's a great rep but I reckon the keyless needs resetting on mine.
Anyone braved it yet?!
Sent from my iPhone using Tapatalk
Anyone braved it yet?!
Sent from my iPhone using Tapatalk
- 11/7/16
- 2,432
- 2,358
- 113
There's a new moonphase up on Trustytime right now, but pics only, no details on the watch. The moonphase looks raised to my eyes, which was one of the biggest faults with the watch IMO.
Let's see if it's a ZFv2
Let's see if it's a ZFv2
VIV54
Renowned Member
- 13/12/17
- 688
- 393
- 63
Now that I thought that I could live without this watch it comes out this.
:bang:There's a new moonphase up on Trustytime right now, but pics only, no details on the watch. The moonphase looks raised to my eyes, which was one of the biggest faults with the watch IMO.
Let's see if it's a ZFv2
It is from GF.
There's a new moonphase up on Trustytime right now, but pics only, no details on the watch. The moonphase looks raised to my eyes, which was one of the biggest faults with the watch IMO.
Let's see if it's a ZFv2
Is this really closer to gen? The moon looks odd and the second hand too dark... Any side by side comparisons?
VIV54
Renowned Member
- 13/12/17
- 688
- 393
- 63
why odd? keep in mind that the image is highly filtered, if you notice the sky is same colour of the second hand, so I think it's fine.
I bought my MUT silver in JAN 2019, after 1 month wore it, I found my moon phase not working properly. It took 15 days to complete a cycle rather than 30 days. I suggest you all ask the seller post a video, "pull out the crown, winds the hand for 15 days or 360 hours, observe how to moon phase operate". If moon phase complete the cycle (moon rise and moon drop) in 15 days, there will be a QC issue. If the moon stop at middle of the watch, you are good to go.
I purchased mine via ZF official web, but apparently they refuse to honor the warranty by not replying my message eventhought I keep message them. SO PLEASE MAKE SURE YOU ARE BUYING WORKING FULL FUNCTION MOON PHASE INSTEAD OF 15 DAYS MOONPHASE.
I purchased mine via ZF official web, but apparently they refuse to honor the warranty by not replying my message eventhought I keep message them. SO PLEASE MAKE SURE YOU ARE BUYING WORKING FULL FUNCTION MOON PHASE INSTEAD OF 15 DAYS MOONPHASE.
- 24/3/17
- 2,772
- 1,389
- 113
None of the factories have "Official" websites. They do not sell directly they only sell through dealers. There are many sellers claiming to be the official factory website but they generally sell cheap junk.
Can you link ZF's official website ?
You have been deceived lol
If that is the case, I bought a junk watch then ????????
mari115
Respected Member
Hi guys, I've received the QC but I 've some doubt about the quality... Can I have some suggestions ?
In particular the indicators seems crooked. The date seems aligned with hands, but printing I can't judge if it's accurate.
What you think?
I LOVE how the TD moved the hands of your watch in order not to let you see that the 6 o'clock marker is misaligned in the close up pics (that are lower quality as well) ahahahah
outrageous.
mari115
Respected Member
Just pulled the trigger on it! Was just wondering if it is better to buy a 22 or 20mm strap if there is not a 21mm available which I would want. Appreciate the help!
Bassy2000
Known Member
- 1/12/17
- 109
- 60
- 0
If you had to choose the 22 mm would be preferred over 20 mm because a too narrow strap leaves an ugly gap although it is only a 1 mm gap. Also a too narrow strap can result in less comfort wearing the watch. You can feel it when the the straps shifts from side to side across the spring bar and hits the lugs.
A 22 mm strap can be fit into a 21 mm space but it is possible that you will scuff the sides of the strap while wearing the watch. That is not a pretty sight, especially on a high end alligator strap.
So I would recommend to keep looking for a 21 mm strap. Read this topic thoroughly, There is plenty information to find a great looking 21 mm curved strap or bracelet for your watch