• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

WatchCo vintage omega seamaster 300

chrome72

Renowned Member
7/12/17
639
562
93
Houston TX Baby

This just popped up on my Facebook. Could be a good case - looks similar to the Helson one
They made a homage seamaster 300 awhile back but don’t make it anymore unless the gmt version is the same case. The site won’t open for me.
 

newest dude on the forum

Some Guy
Supporter
Patron
Certified
17/8/20
1,146
960
113
The EnGrave Yard
The Etsy cases are really bad. The lugs don't have the elegant twist of the gen. There is enough metal there to reshape them properly if you are up to the challenge. The TD cases are also bad, but for a different reason. They're too flat and don't have enough metal to reshape. This thread is an excellent resource for case shape and how it should look:

Your best bet is to get the Borealis or Helson and use that case as the base for a Franken. Those cases are the closest you will find to gen shape OOB.
 

Iceberg99

Active Member
Certified
10/9/19
298
98
28
The Etsy cases are really bad. The lugs don't have the elegant twist of the gen. There is enough metal there to reshape them properly if you are up to the challenge. The TD cases are also bad, but for a different reason. They're too flat and don't have enough metal to reshape. This thread is an excellent resource for case shape and how it should look:

Your best bet is to get the Borealis or Helson and use that case as the base for a Franken. Those cases are the closest you will find to gen shape OOB.
Id say the mk2 project 300 is a good option too but pricey
 

charliehotel

Getting To Know The Place
Supporter
Certified
16/3/23
64
31
18
Ontario, Canada
Late to the party here but interested in this. If going the Helson route, would a gen dial fit? And then outside of that, would it just be cashback and crown needing replacements to fit the part?
 

Geonor

I'm Pretty Popular
Patron
Certified
20/5/22
1,301
3,220
113
Norway
Yeah the Hrousland doesn't look terrible.

KxudCL.jpeg


They managed to get the asymmetrical case right. Probably needs some additional shaping but not a bad starting point.
 

newest dude on the forum

Some Guy
Supporter
Patron
Certified
17/8/20
1,146
960
113
The EnGrave Yard
I'd use the case and bezel. If a gen movement would fit I'd use that with a viet dial and crown. I've made some really nice custom inserts for these. Put it all together with a gen plexi crystal and you've got a winner.
 
  • Like
Reactions: rockdaytona

newest dude on the forum

Some Guy
Supporter
Patron
Certified
17/8/20
1,146
960
113
The EnGrave Yard
Where to get via dial and crown? I see a dial on raffles
Raffles dial might be good. I haven't seen it, just check it for accurate details like where the hashes end and numeral shapes. If not, bivintage has got dials and crowns. He can probably source a gen movement as well. Again, no idea if gen movement would fit one of these alix cases though. Bivintage will also sell complete watches, but the cases and inserts are shitty and the second hand isn't painted.

For me with any rep of a vintage 300 the most important thing to get right is the case shape. These have such a unique and beautiful case shape with the twisted lugs. I've reworked one of the viet cases before and it takes a LOT of filing and then sanding and then polishing. I guess the good thing with the viet case is that there's enough metal to dial in the shape correctly, but these alix cases look good, so why bother?
 

rockdaytona

Respected Member
Supporter
Certified
17/12/19
3,647
3,210
113
Parts Unknown
Raffles dial might be good. I haven't seen it, just check it for accurate details like where the hashes end and numeral shapes. If not, bivintage has got dials and crowns. He can probably source a gen movement as well. Again, no idea if gen movement would fit one of these alix cases though. Bivintage will also sell complete watches, but the cases and inserts are shitty and the second hand isn't painted.

For me with any rep of a vintage 300 the most important thing to get right is the case shape. These have such a unique and beautiful case shape with the twisted lugs. I've reworked one of the viet cases before and it takes a LOT of filing and then sanding and then polishing. I guess the good thing with the viet case is that there's enough metal to dial in the shape correctly, but these alix cases look good, so why bother?
Excuse my ignorance does Bivintage have a store? Google search came up empty
 

newest dude on the forum

Some Guy
Supporter
Patron
Certified
17/8/20
1,146
960
113
The EnGrave Yard
Excuse my ignorance does Bivintage have a store? Google search came up empty

Let him know what you're looking for. In my experience, he can get most anything and at a fair price. Once you establish contact with him he can give you his whatsapp number which is the best way to communicate with him.
 
  • Like
Reactions: rockdaytona

charliehotel

Getting To Know The Place
Supporter
Certified
16/3/23
64
31
18
Ontario, Canada

Let him know what you're looking for. In my experience, he can get most anything and at a fair price. Once you establish contact with him he can give you his whatsapp number which is the best way to communicate with him.
Awesome thanks for the info! Appreciate you taking the time to guide us with this, I've seen some of the ones you've created, incredible man