VSF VS3135 Submariner Comparison Against the Gen

[A.Watch.Enthusiast]

That sounds a little abstract. Are you worried about your watch having dial lines? That's the same on a gen. Same as the crown dots. And what about the "5"?

No that’s a bit odd who wouldn’t want dial lines. Click on my profile you would actually find that QC has been accepted with more updated pictures. Or do people assume on here ?

 

[Jayalvin777]

I used app “lepsi” for IOS to see if it is magnetized, and it says no, but my gen tag heuer carrera yes!!.

I am checking deeper the vsf 3135 sub and it is running about 1 second faster per hour!!! That means around 30 seconds per day.

how the hell the QC Pics displayed accuracy of 1 second?
I have tried diferent positions and same result, running too much fast. In the meantime I have ordered a demagnetizer in aliexpress.

I’d like to have 3-5 seconds per day

If you would understand how the timegrapher works then you will know that what the readings you get from your td are far for reality. You can't get an accurate reading when the watch is only for a minute on the timegrapher. Timegrapher readings are mainly to show that thr movement is alive, anything else take it with a grain of salt.

 

[Akilles]

No that’s a bit odd who wouldn’t want dial lines. Click on my profile you would actually find that QC has been accepted with more updated pictures. Or do people assume on here ?

How would that be any proof of you accepting the watch you mean? I think your not gonna get any more feedback regarding you watch until it's on your wrist irl

 

[garnier]

If you would understand how the timegrapher works then you will know that what the readings you get from your td are far for reality. You can't get an accurate reading when the watch is only for a minute on the timegrapher. Timegrapher readings are mainly to show that thr movement is alive, anything else take it with a grain of salt.

Yes, I supposed something like that. The TD will take a picture to show that the watch runs and in the best moment

 

[d3s19n]

Anyone review a 116613lb in person yet?

 

[StreetFighter]

Anyone review a 116613lb in person yet?

VSF gold - AVOID. It’s not gold, it’s not even a close gold colour, it’s dark orange, don’t bother. I’m sending this to Italy for 18k plating...

 

[Fervid]

VSF gold - AVOID. It’s not gold, it’s not even a close gold colour, it’s dark orange, don’t bother. I’m sending this to Italy for 18k plating...

It's this all over again; https://youtu.be/pyc6YckBRRM?t=40

 

[StreetFighter]

It's this all over again; https://youtu.be/pyc6YckBRRM?t=40

Yep, same thing. Thankfully this one here will get proper plated with real 18k gold so it should end up being better than any rep.

 

[Giellea]

Anyone review a 116613lb in person yet?

I bought the 116613 clean and Vsf. As soon as I receive them I will post the photos of the comparison, then I will combine the two versions to create a better one.

 

[Vazor]

Just received my QC pics from Lucy. It's from the S29 batch. I'm kinda worried about the bezel alignment, what do you guys think?

https://imgur.com/a/me6EV7t

 

[Tobel]

Just received my QC pics from Lucy. It's from the S29 batch. I'm kinda worried about the bezel alignment, what do you guys think?

https://imgur.com/a/me6EV7t

That you can't post all of your QC pics here like this. Please read the rules. You have a specific question about the bezel that's fine, but then pictures about the case or the clasp are not required to illustrate your question. So please remove the unnecessary pictures

With regards to the bezel alignment it looks great to me

 

[Tijdwijzer]

Just received my QC pics from Lucy. It's from the S29 batch. I'm kinda worried about the bezel alignment, what do you guys think?

https://imgur.com/a/me6EV7t

QC pics looks good. Don't mind the guy above, he's just a negative Nancy.

 

[up2wind]

I bought the 116613 clean and Vsf. As soon as I receive them I will post the photos of the comparison, then I will combine the two versions to create a better one.

That will be great.

Are you combining the best of both to make out a hybrid 116613LB?

 

[Tobel]

QC pics looks good. Don't mind the guy above, he's just a negative Nancy.

I'm not sure exactly what you're on about. He didn't respect the rules did he ? So I highlighted that while still answering his question, what more do you want?

This is the 2nd time you've just made such a comment. I'm not sure who you think you are, making that kind of judgement and attack but as far as I can tell you haven't contributed anything to this forum so you may want to chill out a little with your "know it all" mindset when clearly you haven't yourself understood the basic rules of this forum.

 

[Giellea]

That will be great.

Are you combining the best of both to make out a hybrid 116613LB?

yes man, i will combine the best of the two versions to create a hybrid.

 

[Vazor]

Thanks guys I appreciate it!

 

[dc2_bb6_cu2]

I bought the 116613 clean and Vsf. As soon as I receive them I will post the photos of the comparison, then I will combine the two versions to create a better one.

Please post your findings. Especially the color of gold on each. I’ve found VRF to be too orange/bronze-ish for my liking. Wondering if Clean is the same.


Sent from my iPhone using Tapatalk

 

[cassapanca]

Received today my vsf 116610 s29.. first impression: wow!
Many thanks to [mention]KSwatches [/mention]


Inviato dal mio iPhone utilizzando Tapatalk

 

[dragon07]

Hello, I bought a vsf 116610LN. There is a click on the bezel. when I turn the bezel it does not come up at some points. But when I press it over 12 it makes a noise. Anyone have this problem? What is the solution ?

 

[Aramis2288]

Hello, I bought a vsf 116610LN. There is a click on the bezel. when I turn the bezel it does not come up at some points. But when I press it over 12 it makes a noise. Anyone have this problem? What is the solution ?

You can pop it open and oil it with some silicone grease.