Hey everyone! I have just orderes my grey Variante of the watch and got the quality pics and a Video from jtime. Pictures Look very good in my oppinion (I can Post a link if anybody wants to see), but the amplitude of the watch shows 320 degree. I have read that it Should normally have 260-300 degree. Is there a Problem with the watch? Thanks for your help!
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Vsf 2018 seamaster diver 300m
- Thread starter GENneral
- Start date
QC pics from Jtime
Indices look like they may have the yellow tint that has been talked about, what do you guys think? Also alignment at 35,40 and 45 looks way off and some of the others look slightly off. Or it could be angle. Appreciate any feedback.
Sent from my Vivo 8 using Tapatalk
Indices look like they may have the yellow tint that has been talked about, what do you guys think? Also alignment at 35,40 and 45 looks way off and some of the others look slightly off. Or it could be angle. Appreciate any feedback.
Sent from my Vivo 8 using Tapatalk
Wow just looked at these pics that is very yellow, what color is like supposed to be?I'd like to reiterate that when I talk about the yellow lume issue I am not talking about just a tiny tinge of yellow hue like gen has. I am not calling it an issue just cause it's not pearly white nor am I stating gen is all pearly white. But if someone has this yellow lume issue, it is REALLY yellow. Two examples:
Gen never gets this yellow. The reddit topic that was linked here, the poster said he took his yellow lume replica to the AD and when comparing, he did note the Gen has some yellow to it but not nearly as yellow as his own replica with the yellow lume issue. Let's also not forget that people who have seen these photos here said that their own reps never got that yellow. So there is definitely some inconsistency is the yellow between batches.
Also, when certain posters try to dispel the yellow lume issue, they always used gen pictures in yellow lighting where the lume looked kind of yellow but so did the numbers on the bezel. Showing that the lighting hitting the indices and bezel numbers had the same hue to it, meaning it was a matter of room lighting. Here, you can see the yellow lume issue while the bezel numbers are pearly white. This means that there is no yellow lighting reflecting off the index markers to just "appear" yellow. It is just yellow! Not just yellow but really damn yellow. Show a gen SMP with pearly white bezel numbers and a yellow hue this strong. It won't happen.
Sent from my Vivo 8 using Tapatalk
QC pics from Jtime
Indices look like they may have the yellow tint that has been talked about, what do you guys think? Also alignment at 35,40 and 45 looks way off and some of the others look slightly off. Or it could be angle. Appreciate any feedback.
Sent from my Vivo 8 using Tapatalk
Seems to be the angle. Better ask for different pics.
Those indices have the normal slight yellow tint on it, nothing to worry about.
Those markers actually look pretty good, only a very slight tinge to them. I think the Bezel just looks off from the angle.
Maybe you can see the slight green tint on the markers of mine, but it's hard to capture. Tried to compare it to the pure white markers of my Davosa Ternos Professional:
Last edited:
Just received this from a TD on Saturday. One pic it looks like a yellowish tint, the next, not so much. Far more concerning to me is the lack of alignment on the bezel, especially a the 12 and 6 o'clock positions but it's just not printed correctly at all. Just didn't really notice on the QC pics. My first rep, rookie mistake. next rookie mistake, pics did not upload. Sorry, my first post with pics was a disaster.
https://ibb.co/k3WxWgY
https://ibb.co/P4LxGPz
https://ibb.co/k3WxWgY
https://ibb.co/P4LxGPz
Last edited:
second set of qc pictures here..i think that has a little yellowish markers (when i see it on my phone's screen. on my pc screen it seems ok). not a big problem i guess.
is this v2 bracelet/clasp? omega logo is machined deeper than others.
full album here: https://imgur.com/a/zRj9BbB
is this v2 bracelet/clasp? omega logo is machined deeper than others.
full album here: https://imgur.com/a/zRj9BbB
Last edited:
second set of qc pictures here..i think that has a little yellowish markers (when i see it on my phone's screen. on my pc screen it seems ok). not a big problem i guess.
is this v2 bracelet/clasp? omega logo is machined deeper than others.
full album here: https://imgur.com/a/zRj9BbB
Yes, it is V2 bracelet and clasp.
second set of qc pictures here..i think that has a little yellowish markers (when i see it on my phone's screen. on my pc screen it seems ok). not a big problem i guess.
is this v2 bracelet/clasp? omega logo is machined deeper than others.
full album here: https://imgur.com/a/zRj9BbB
I hate being nitpeaking but is the 3 marker crooked? and the pimp a little out on the right side? GL or RL?
Last edited:
shortlegs
Active Member
- 31/5/19
- 493
- 271
- 63
Just received my QC photos. What do you all think about the lume color? It looks pretty yellow on my phone, but on the computer, less so. Quite different I must say..
https://imgur.com/a/LkPrBqI
Should I ask for additional photos under natural sunlight and under direct indoors light?
https://imgur.com/a/LkPrBqI
Should I ask for additional photos under natural sunlight and under direct indoors light?
- 21/4/19
- 1,806
- 2,158
- 113
That's very fickle. I'd say ask for a natural lighting photo.
Also very interesting that you should say how different it looks on separate devices. Thank you for bringing that up! Different colour gamut levels on different devices will show slight differences so to the discerning eye this can be frustrating. Unless you have a graphics designer monitor with outrageous colour reproduction accuracy, it will be very difficult to get a perfect opinion.
Unless you have it on hand, then your eye will do the work of several thousand dollar devices
Sent from my DHGate Shitter using Tapatalk
Last edited:
Finally received the QC pics from Lucy. I think I'm going to accept.
First watch got seized by customs. Lucy just sent me these last night and I accepted it. Looks great. Just need to buy a genuine rubber band for it.
Has anyone had the issue of the date wheel not disengaging when attempting to screw down the crown? Is this a common problem or any idea on what it would take to fix something like that?
Setting the time is very difficult as I have to set the date multiple days before and keep attempting to screw down until it lands where I need it.
Setting the time is very difficult as I have to set the date multiple days before and keep attempting to screw down until it lands where I need it.
see thats what the gen looks like, very subtle hue but overall very white. Ours are like always off color... and here's the thing. My markers look white in SOME LIGHTS, like very white. But in random situations the greenish yellow hue will show like a sore thumb. Its very weird, but those look good (Y)
Tcc13c
Known Member
- 9/6/19
- 185
- 32
- 0
Yes I haven't found a solution but I just set my date to the day before the current day and then after I screw it down it goes to the correct date. I'm hoping a full servicing will fix this issue.