-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
VSF 126610 Submariner with VS3235 Latest Movement 72 Hours Power Reserve
- Thread starter trustytime
- Start date
kk169
Known Member
- 7/1/19
- 152
- 90
- 28
I have see QC vids before where a dealer turning the DW from 1 to 31... not sure which one as I buy mainly from Angus, Li, and Andrew and had maybe only rejected 1 QC due to DW alignment and only had a batman with very minor amongst all my purchases. You may try that getting your TD to do that for you nex time.
I generally also do not find DW changing overnight vs manually adjusting it make any difference. But I have seen some QC pics that are taken at an angle that made DW alignment seems off while it is actually ok (rehaut alignment also suffer from this camera angle issue too). My 116610/116610LV/116619LB from VSF all don't have DW issue, Hopefully this is not a new thing for their 3235 movement...
The main consensus is that the VSF is the best OOTB, and bang for your buck.
Just received my watch from[mention]jtimewatch [/mention].
Thanks to Li and Lana again.
And side by side with the Smurf.
Thanks to Li and Lana again.
And side by side with the Smurf.
- 9/10/20
- 457
- 377
- 63
I have modded all my Rolex watches. But when I saw this one! My God it’s the best rep out of the box. I honestly don’t feel like it needs any mods. Maybe to silent the roter a bit. It’s not that loud.
Loving it. Thank you VSF.
Sent from my iPhone using Tapatalk
Loving it. Thank you VSF.
Sent from my iPhone using Tapatalk
Gen rotor is loud now with the new movement... so actually even the rotor noise is genlike...
- 9/10/20
- 457
- 377
- 63
other than the DW distortion i really love this watch.....my 126610LV has been great to me. a crystal swap would make this truly magnificent....i'm surprised to see all of these issues popping up and i had a late order myself. had it for about a month and then a month to get to me. ordered at end of CNY in FEB, received late march, not quite 30 days but close.
no rotor noise. winds buttery smooth. just the crystal with the distorted date window issue which I also see on the pic above with the smurf. so something VSF is going on with cyclops. not that is hasn't been noted but i see it on the smurf so i'm guessing its on most of the line up then or recent releases.
no rotor noise. winds buttery smooth. just the crystal with the distorted date window issue which I also see on the pic above with the smurf. so something VSF is going on with cyclops. not that is hasn't been noted but i see it on the smurf so i'm guessing its on most of the line up then or recent releases.
- 30/12/20
- 517
- 332
- 0
Never had a single issue with mine. Buy with confidence
Sent from my iPhone using Tapatalk Pro
VSF hurry up with the 126613LB so I can do a comparison review! Also while they’re at it, let’s get that 124060 not sure why that’s taking so long!
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Mille M
I'm Pretty Popular
- 24/7/18
- 1,254
- 2,757
- 113
I've handled a gen LN and man, this made me love my vsf even more.
Such a good watch OTB.
Only thing it's noticeable, when looking at both, side by side, is the dial.
The gen dial also has the center hole effect, but it's less pronounced. On the edges it's almost not noticeable on the gen, and very noticeable on the VSF (I talk about the curvature of the dial on the edges).
Being a highly glossy dial, under almost any light, we can see the "wobliness". It still look amazing. The printing, the indexes, all looks amazing. But the gen is flatter and I noticed it immediately.
I didn't took a picture because it was a friend of a friend.
And I didn't inspect the watch that much. Just glanced.
Just had the excuse to look closer because it was the LN (I asked him to see the watch saying I was also considering the black ceramic
)
His sub already had a scratch and he even joked, asking if I wanted to trade watches, because mine was so clean (he didn't have a clue my sub was a rep, and I didn't tell him)...
But they were really really close.
VSF does an amazing job with these.
Such a good watch OTB.
Only thing it's noticeable, when looking at both, side by side, is the dial.
The gen dial also has the center hole effect, but it's less pronounced. On the edges it's almost not noticeable on the gen, and very noticeable on the VSF (I talk about the curvature of the dial on the edges).
Being a highly glossy dial, under almost any light, we can see the "wobliness". It still look amazing. The printing, the indexes, all looks amazing. But the gen is flatter and I noticed it immediately.
I didn't took a picture because it was a friend of a friend.
And I didn't inspect the watch that much. Just glanced.
Just had the excuse to look closer because it was the LN (I asked him to see the watch saying I was also considering the black ceramic
)His sub already had a scratch and he even joked, asking if I wanted to trade watches, because mine was so clean (he didn't have a clue my sub was a rep, and I didn't tell him)...
But they were really really close.
VSF does an amazing job with these.
Last edited:
I just received this beauty. Here a couple of quick snaps.
I’m very happy with my 126610ln. The date looks perfect to me. I sold my 116610ln
I’m no newbie here, but which TD are you guys using?
I normally use JTime but my payment was refunded due to their union card number...
Anyone recommend their preferred TD?
I normally use JTime but my payment was refunded due to their union card number...
Anyone recommend their preferred TD?
Eatdirtfartdust
Known Member
I had a good experience with Puretime. Then tried Jtime to save $20 and was mislead. So I won’t buy from JTime again.