- 25/9/22
- 6,315
- 17,400
- 113
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
V7 will release Ingenieur!
- Thread starter Reaps
- Start date
- 25/9/22
- 6,315
- 17,400
- 113
Nothing but promo pics of gen yet but V7 is a very well known and solid factory for IWC. Let's hope they make a great rep.
- 25/9/22
- 6,315
- 17,400
- 113
V7 makes some of the best IWC reps, they're well known for it unlike GH (which is very unknown) so my hopes are high.
bombina
Known Member
- 17/8/15
- 142
- 106
- 43
Most likely IX&DAO Engineer watch with a IWC branded dial. The IX&DAO is much better IWC rep vs the current POS rep on the market.
theactualwitcher
Do not accept unsolicited offers
- 15/8/23
- 8
- 8
- 3
Have anyone of you seen the IXDAO one before?
Do you think the quality of V7's rep would be similar to IXDAO's(case, bracelet, finishing)?
The reason I'm asking is that the IXDAO one uses a cheap to replace movement meaning less stuff to worry about. Also their logo dial looks neat.
Thanks!
Do you think the quality of V7's rep would be similar to IXDAO's(case, bracelet, finishing)?
The reason I'm asking is that the IXDAO one uses a cheap to replace movement meaning less stuff to worry about. Also their logo dial looks neat.
Thanks!
there is another thread where someone put pics of the ixdao. it looked really good
tbransby94
Known Member
theactualwitcher
Do not accept unsolicited offers
- 15/8/23
- 8
- 8
- 3
So I did some looking up. The IXDAO uses the PT5000, SW200, or ETA 2824.
And the gen uses the IWC caliber 32111 which is based on IWC caliber 32110.
Now the 32111 is exactly the 32110 with a larger barrel, by this the 120 hours.
I've found that the caliber 32110 has the same dimension specs etc with the ETA 2892-A2.
Now all the ETA 28xx movements are similar, with mainly the only difference in thickness and quality. I belive the 2892 is just a bit thinner than 2824. And I've read that people had success replacing both movements.
So what this means is that the IXDAO has the potential to accept dial and hands from either the gen or the soon to be released v7 rep.
And the gen uses the IWC caliber 32111 which is based on IWC caliber 32110.
Now the 32111 is exactly the 32110 with a larger barrel, by this the 120 hours.
I've found that the caliber 32110 has the same dimension specs etc with the ETA 2892-A2.
Now all the ETA 28xx movements are similar, with mainly the only difference in thickness and quality. I belive the 2892 is just a bit thinner than 2824. And I've read that people had success replacing both movements.
So what this means is that the IXDAO has the potential to accept dial and hands from either the gen or the soon to be released v7 rep.
theactualwitcher
Do not accept unsolicited offers
- 15/8/23
- 8
- 8
- 3
Yeah feedback and corrections would be very much appreciated for this
I'm a newbie when it comes to movements and all that.
The PT5000 is without a doubt better than a A2824 … but sw200 and eta 2824 are a bit better than PT5000 movements …
PT5000 over an a2824 anytime
putting a sw or gen eta is 3x 4x more expensive, so needs to be in a real keeper watch
@Karbon74 is of course right, the PT5000 is a good Caliber
calibercorner.com
HKPT Caliber PT5000 Watch Movement | CaliberCorner.com
PT5000 automatic watch movement made by H.K. Precision Technology (HKPT). The caliber PT5000 is Chinese ETA 2824-2 clone. 11.5 linges, 25 jewels, 38 hours power
calibercorner.com
I love my V7F Mark XX with the Seagull ST1812. The 2892 clone. They like sticking this in their IWC reps so hopefully they do that here as well. It's a great movement.
