- 27/6/16
- 768
- 2,293
- 93
Hello, guys. I'm Steve and I'm back. We've already done two comparisons of the Submariner series, 126610LV and 116613LB, so let's get back to the classics. As the ace of the Submariner range, the 116610LV needs no introduction to its popularity, so let's get started.
116610LV has a famous name in our country, that is “green water ghost” (hulk), so the dial color has naturally become the focus, the gen color is dark green, after repeated observation and comparison of the real objects, VS and KING's color is the closest to GEN, especially KING's black and green gradient effect is the most similar to GEN, Clean is also good, but the radial pattern is a bit stronger. The biggest color difference is ZF factory, too bright. But it is difficult to notice the difference without comparing them side by side. Which factory do you think has the better color?
The VS factory uses the V4 of the clean bezel. The color and brightness of the clean bezel are very good, and there is almost no color difference compared to the GEN, while the bezel of ZF and KING are also actually very good, and there is no difference between the color and the clean bezel. After checking with the factory, ZF factory claims to be using the clean V1 bezel and KING claims to be using the clean V4 bezel as well.
The shape of the KING's teeth is distinctly different from the GEN's, and the brushed finish on the side of the ZF is too obvious, which has led to a more pronounced depth.
VS and KING do not have chamfered mirror edges, and although clean and ZF do, they do not have the same shape as GEN.
As explained earlier, all four factories use the Clean bezel, and the clean bezel is worthy of being the best submariner green bezel available today, with a platinum filling that is very close to the GEN color and a very regular and fine filling. This is why all the major factories have adopted the clean fitting, which shows that it has been fully accepted by the market, including the factories.
There are slight differences between the factories and GEN colors, VS and KING are slightly whitish, while CLEAN is a little darker, ZF is too yellow and the edges are raised too high.
Dial front view
View of the dial in natural light
View of the dial in natural light
View of the dial under lighting
116610LV has a famous name in our country, that is “green water ghost” (hulk), so the dial color has naturally become the focus, the gen color is dark green, after repeated observation and comparison of the real objects, VS and KING's color is the closest to GEN, especially KING's black and green gradient effect is the most similar to GEN, Clean is also good, but the radial pattern is a bit stronger. The biggest color difference is ZF factory, too bright. But it is difficult to notice the difference without comparing them side by side. Which factory do you think has the better color?
Side view of bezel
The VS factory uses the V4 of the clean bezel. The color and brightness of the clean bezel are very good, and there is almost no color difference compared to the GEN, while the bezel of ZF and KING are also actually very good, and there is no difference between the color and the clean bezel. After checking with the factory, ZF factory claims to be using the clean V1 bezel and KING claims to be using the clean V4 bezel as well.
Side view of the teeth insert
The shape of the KING's teeth is distinctly different from the GEN's, and the brushed finish on the side of the ZF is too obvious, which has led to a more pronounced depth.
Side view of the glass
VS and KING do not have chamfered mirror edges, and although clean and ZF do, they do not have the same shape as GEN.
view of the bezel digital
As explained earlier, all four factories use the Clean bezel, and the clean bezel is worthy of being the best submariner green bezel available today, with a platinum filling that is very close to the GEN color and a very regular and fine filling. This is why all the major factories have adopted the clean fitting, which shows that it has been fully accepted by the market, including the factories.
Pearl View
There are slight differences between the factories and GEN colors, VS and KING are slightly whitish, while CLEAN is a little darker, ZF is too yellow and the edges are raised too high.
Last edited:
(and now I need a VSF Hulk, damn you 
