Rolex Arabic

[Mommo194]

Hello friends,

I am looking for a Rolex Arabic Super Clone 1:1 that is perfectly matched in weight and equipped with a high-quality Swiss movement. So far, I have only found TWS factory, but it is second-grade quality, so I need your help in finding a better factory and a trusted seller.





I would really appreciate any recommendations you can share.

Thank you!

 

[dpd3672]

Trusty has a bunch

Search Results -> arabic : Trusty Time Watch, Your Trusty Watch Shop

 

[Mommo194]

Thank you Dpd3672

They have great products but also not the quality I want.

 

[rolex4me]

Thank you Dpd3672

They have great products but also not the quality I want.

because what you are looking for does not exist (at least not from the factory)

 

[Mommo194]

There is an error in writing the day and date in Arabic, because the 2021 model was written by an Iraqi Arabic calligrapher, the GMF Factory product uses a font produced in 1980.

 

[trustytime]

If you are able to provide me with the details of the Arabic disc print in full, I can speak with the GM Factory to generate new day date discs.

Thanks.

If there is anything we can help you with any queries, please feel free to EMAIL at: [email protected] or PM us here.

I have been one of the longest standing Trusted Dealer since 2002 - Trusty Time and I am Andrew here.

www.trustytime88.io

We hope to be able to serve you soon.

Cheers. Have a nice day.

 

[RDRoss]

Welcome.
It sounds like you are looking for a unicorn. If you want something with the absolutely everything correct you really need to consider a gen purchase and save the hassle. That being said, if you are willing to work with a modder and source parts you can build a satisfying franken build, especially with the release of the clone 3255 movements which should in theory take Gen parts like dials and day and date discs. No rep out of the box will be perfect and only you can decide what level of perfection will be acceptable. Most folks wouldn’t know OOTB that a watch is a rep from three feet away. Heck most wouldn’t notice flaws at a social distance so your mileage may vary.

Have a read in the brands review section for a deep dive into details and builds from RWIs incredible members and trusted dealers.

Speaking of trusted dealers, stick to those listed on this site. They will do right by you and are just darn fine folks.

Good luck.

 

[Reaps]

What you're looking for, doesn't exist.

 

[eBoy]

Hello friends,

I am looking for a Rolex Arabic Super Clone 1:1 that is perfectly matched in weight and equipped with a high-quality Swiss movement. So far, I have only found TWS factory, but it is second-grade quality, so I need your help in finding a better factory and a trusted seller.





I would really appreciate any recommendations you can share.

Thank you!

Hello and WELCOME to the official RWI reception desk!

We're thrilled to have you here! If you’re receiving this message, it’s because you’ve either posted in the "New Members Say Hi" section or made your first post(s) elsewhere on the forum. If it’s the latter, why not take a moment to introduce yourself in the New Members Say Hi section?

Before you dive in, please take a moment to review the sticky threads. They contain vital information, including the forum rules. Pay particular attention to the sales rules—you won't be eligible to sell items until you meet specific criteria and are certified.

Getting Started

1. Must-Read Resources for New Members
Start here for a collection of essential threads and helpful information:

New Members - WELCOME! Must reads and interesting info, START HERE!

Welcome to RWI! :) Here are some links with interesting information and must-reads, that helped me a lot in the beginning. Hope it will do the same for you! Start reading, there is a lot of interesting information available. Forum Terms & Abbreviations, what do they mean: this will make...

forum.replica-watch.info

2. Welcome Guide
You may have seen this upon logging in, but it’s worth another look:

You are welcome

If you've just joined and are reading this, welcome to RWI. If you are having issues with posting and sending PMs please log out and in again. If still no joy, log out, clear cache and RWI cookies and log in again, this will fix the issue. If you stop here, or read just the next few lines...

forum.replica-watch.info

3. Anti-Fraud Guide
If you’re considering ordering from a dealer, this quick guide is a must-read to stay safe:

THE QUICK RWI ANTI-FRAUD GUIDE FOR PEOPLE WHO DON'T LIKE TO READ

THE QUICK RWI ANTI-FRAUD GUIDE FOR PEOPLE WHO DON'T LIKE TO READ, BUT WANT TO BUY A REPLICA: Intro: This guide is supposed to serve as a fast reference sheet for newbies to get a quick scam prevention overview over the most important things to consider before buying a rep. Remember: You need...

forum.replica-watch.info

If you have any questions or need assistance, don’t hesitate to reach out to me or @Feefo. We're happy to help, but please be patient as responses might take some time—we have lives outside of RWI too!

Once again, welcome aboard! We look forward to seeing you around the forum.

 

[dpd3672]

Thank you Dpd3672

They have great products but also not the quality I want.

As mentioned above, what you want might not exist, at least out of the box, from a factory.

Probably the closest you're going to get would be a franken watch, maybe starting with the better base (one of the "weight added" models with tungsten added for correct weight) and a genuine dial, for starters...the more genuine parts you add, the closer it will be to genuine.

That said, there's a point where it makes more financial sense to just purchase a gen watch, but that point is different for everyone. You can get a vintage (4 digit) 36mm used for about $10k, but the larger, 40-41mm gens are selling for $30-40k, used. So investing $3k in a Franken 40mm might make sense, investing $5k into a Franken 18mm gets a bit harder to justify.

 

[TonyMontana]

If you are able to provide me with the details of the Arabic disc print in full, I can speak with the GM Factory to generate new day date discs.

Thanks.

If there is anything we can help you with any queries, please feel free to EMAIL at: [email protected] or PM us here.

I have been one of the longest standing Trusted Dealer since 2002 - Trusty Time and I am Andrew here.

www.trustytime88.io

We hope to be able to serve you soon.

Cheers. Have a nice day.

Very interested in finding out if there are any updates regarding this!?

Also are the Arabic day and date discs available to purchase alone? Prices?

Thanks.

 

[Reaps]

Very interested in finding out if there are any updates regarding this!?

Also are the Arabic day and date discs available to purchase alone? Prices?

Thanks.

I have thí model from GMF but it's not the highest replication, lót ò small details are wrong

 

[TonyMontana]

I have thí model from GMF but it's not the highest replication, lót ò small details are wrong

Who does the Arabic discs the best you think?

 

[Reaps]

Who does the Arabic discs the best you think?

You only have one option for this one. GMF. And it's only ok. Don't expect too much from a $400 replica of a $300,000+ watch quite frankly

 

[TonyMontana]

You only have one option for this one. GMF. And it's only ok. Don't expect too much from a $400 replica of a $300,000+ watch quite frankly

Fair enough, any idea what gen dial is a good fit for the GMF with Asian movement? Really looking to swap a gen dial, I have one for 41mm size but it has two small dial feet. Not sure how this dial would fit

 

[Reaps]

Fair enough, any idea what gen dial is a good fit for the GMF with Asian movement? Really looking to swap a gen dial, I have one for 41mm size but it has two small dial feet. Not sure how this dial would fit

You won't get the asian movement to fit with a gen dial because of the dial feet, you need a VR3255 clone. Also to warn you, you need to find one that is a PT950 stamp not a AU750 DD40 stamp, which I don't know enough about Daydates to tell you if it actually exists or not.

 

[trustytime]

Some modders will cut off the dial feet to modify and fit the gen dial on the rep movement.

 

[TonyMontana]

You won't get the asian movement to fit with a gen dial because of the dial feet, you need a VR3255 clone. Also to warn you, you need to find one that is a PT950 stamp not a AU750 DD40 stamp, which I don't know enough about Daydates to tell you if it actually exists or not.

Oh I see, what if I'm ready to sacrifice the dial by cutting the feet? Would gluing the dial be an option?

Sorry I didn't understand the stamps you mentioned "PT950" and "AU750" what would the difference between them would be on the build?.

Thanks, sorry if I sound a bit dumb I'm new to this hobby, appreciate your time and help bro

 

[Caboose]

Some modders will cut off the dial feet to modify and fit the gen dial on the rep movement.

Most people here recommend not molesting a gen dial as that eliminates a lot of the value. So much cheaper to get a rep movement that accepts a gen dial. Before the replicated Rolex movements, cutting the feet was more common.

 

[TonyMontana]

Most people here recommend not molesting a gen dial as that eliminates a lot of the value. So much cheaper to get a rep movement that accepts a gen dial. Before the replicated Rolex

I have been told by a friend that the dial I got is from a 41mm day date 2, I was thinking it was a 40mm day date dial like stated in the eBay listing, is there any way I can check for sure if it's from 40 or 41mm DD?