Post your franken Daytona’s and spec

[Mr.Marbella]

some more eye candy

Sent from iX

I‘ve seen your COSMOGR APH dial before it was installed in the watch, looked amazing !

Hat sich der weite weg gelohnt wie ich sehe


Gesendet von iPhone mit Tapatalk Pro

 

[Spatiumtemporis]

Guys any tips on how to safely remove the ceramic insert?

Tried pressing the crystal but it popped out leaving the gasket along the insert attached to the case.

 

[Spatiumtemporis]

some more eye candy

Sent from iX

Hey mate. What bracelet did you use for the 116520 white dial ? Sel fitment is very good!

 

[MadWatcher]

And finally

Where did you get that case back?

 

[Spatiumtemporis]

JF case

 

[Micasol]

Where did you get that case back?

eBay official time


Envoyé de mon iPhone en utilisant Tapatalk

 

[Micasol]

Guys any tips on how to safely remove the ceramic insert?

Tried pressing the crystal but it popped out leaving the gasket along the insert attached to the case.

Each time I fit out the ceramic bezel, crystal and gasket come with, gasket and crystal are pressed by the bezel to remained in place and be waterproof. Don’t fit out too much the bezel, you could injured the crystal gasket, had this issue with mine even if crystal and gasket are gen, had need to change the gen gasket by a new gen one, hopefully gen crystal comes with 2 gaskets.


Envoyé de mon iPhone en utilisant Tapatalk

 

[M Scott]

Where did you get that case back?

Custom Watch Concepts in Germany makes a really nice one...
Not sure if you order the part number for a 116520 or for a 116500. Price is the same, so maybe the part is the same?

http://www.customwatchconcepts.com/index.php?cPath=1_12&MODsid=a4587bbcf6781d3e4c8a23d88373e23a

 

[Spatiumtemporis]

Each time I fit out the ceramic bezel, crystal and gasket come with, gasket and crystal are pressed by the bezel to remained in place and be waterproof. Don’t fit out too much the bezel, you could injured the crystal gasket, had this issue with mine even if crystal and gasket are gen, had need to change the gen gasket by a new gen one, hopefully gen crystal comes with 2 gaskets.


Envoyé de mon iPhone en utilisant Tapatalk

i'm not quite sure i fully understand. So you mean that most of the times the crystal and gasket will pop out along the bezel when pressed ? If that's so, i got unlucky cause my crystal popped out leaving the bezel and the gasket attached to the case. So while on a SS bezel i could use a sharp knife to slowly remove raise the bezel from the case, i'm pretty sure that using the same method will damage the ceramic bezel.

I might have to boil the cese )) and hope the gaseket will soften

 

[Micasol]

I use this tool to fit out ceramic bezel, crystal and gasket will come with, bezel

When pressed not a problem, used this one

goes perfectly in, more easier than with the steel bezel.


Envoyé de mon iPhone en utilisant Tapatalk

 

[Micasol]

Just protect the case when using the first tool, because could scratch it


Envoyé de mon iPhone en utilisant Tapatalk

 

[guru]

Hey mate. What bracelet did you use for the 116520 white dial ? Sel fitment is very good!

Standart noob bracelet with ETA springbars and guru SEL mod.


Sent from my iPad with Tapatalk

 

[dashing]

ETA springbars

Where can we get these spring bars?

 

[clockwork]

Noob Daytona 4130 as base watch with fully working chrono (lovely movement)
Case shaping mod by HauteHorloge to reshape the case to gen specs Daytona (lovely modder and work)
Gen white 16520 dial
Gen narrow hands
Gen crown
Gen crystal
ARF bezel from ARF Daytona
Noob bracelet with ARF clasp
Just need to make the Guru SEL mode to make it perfect ! ))

 

[Spatiumtemporis]

I use this tool to fit out ceramic bezel, crystal and gasket will come with, bezel

When pressed not a problem, used this one

goes perfectly in, more easier than with the steel bezel.


Envoyé de mon iPhone en utilisant Tapatalk

thanks man !!

 

[Spatiumtemporis]

Standart noob bracelet with ETA springbars and guru SEL mod.


Sent from my iPad with Tapatalk

Are you selling this mod or are you able to share details ? thx ! sel fitment looks great!

 

[Spatiumtemporis]

Work in progess :

- reworked lugs
- polished pushers

 

[M Scott]

Are you selling this mod or are you able to share details ? thx ! sel fitment looks great!

https://forum.replica-watch.info/forum/rolex-tudor-replicas/7683601-sel-mod

 

[Micasol]

Work in progess :

- reworked lugs
- polished pushers

Look good


Envoyé de mon iPad en utilisant Tapatalk

 

[fradic]

Work in progess :

- reworked lugs
- polished pushers

Looks amazing! Please tell me when you get tired of this piece