{*PCTeam*} PAM 111 Noob V3 - Discussion, Compilation of data, Wristshots, QC pics

[thran]

Most of the Qc pics that I'm seeing the crystal is what seems slightly raised, even mine are the same, I'm not that concerned as I have a crystal press. Suppose time will tell, I'll hopefully have mine by Monday will know better then.

let us know ! maybe ill ship u mine out

 

[ALE7575]

is the gen even raised?

Yes it seems that all crystal V3 are raised
We don't know if the gen is the same.

BUT WE REMAIN WAITING FOR INFO ABOUT CRYSTAL FLUSH OR RAISED IN PAM 111 N GEN !!

This matter was already noticed too in REP GEEK
http://www.repgeek.com/showthread.php?t=185245
See posts # 9.-10-12-13…


I'm going to put a thread in RG and RWG asking for this question in order to have more inputs

We will see

ALE

 

[ALE7575]

Hi all. I've received my QC pics from Toro and here they are. After viewing and comparing my QC pics with Thran's, i couldnt really tell the difference if the height of the crystal on mine is too highly raised or not. Any advices?

Also, I can't really tell if the CG has a gap between the case though as it was not taken in the angle. But I guess that's not really the issue. Getting kinda nervous after reading that the crystal was too high and I can't see if mine was normal or not! Lol!

Thanks for the tips and advices too! I really appreciate it!

Kindly see belowfor my attached QC pics from Toro.

No worries about the CG gap, in case you have it it will be impossible to notice it in real size
Your watch have "raised" Crystal like all V3. It is the same in gen??
We don't know yet
Read other posts about
ALE

 

[ALE7575]

Gen 111/177 are the same watch except for the material use for the case (SS vs Ti) and the fact that the crystal on the 111 is a bit raised while the one on the 177 is flush.
I'm not surprised to see that Crystal on those Noob 111v" raised as it is, seems correct to me.

As for the hands, they're not Pre-V, but pre-V style, meaning that they're use the same construction that the previous one (not Pre-V) but with a look that approach the Pre-V: the lume part that goes into the tip.

Thanks SpB for sharing and the draw

I didn't know it

Where do you know it from?

 

[ALE7575]

Most of the Qc pics that I'm seeing the crystal is what seems slightly raised, even mine are the same, I'm not that concerned as I have a crystal press. Suppose time will tell, I'll hopefully have mine by Monday will know better then.

Waiting for your conclusions Sharrkey
Thanks

ALE

 

[tranzmizzion]

Its raised

http://www.chrono24.com/en/panerai/...--id2008754.htm?id=2008754&picnum=10&tab=pics

 

[sharrkey]

Few pics Ale of a Gen 111n that sold on Watchuseek

Look's slightly raised to me

 

[PolonusTM]

another gen 111n:

It is not as rised as on Noob 111n.

 

[Spboudart]

Where do you know it from?

Learned it at WC and cross-checked on Paneristi.fr from a thread that was originally translated from Paneristi.com, I'll try to post a link.

 

[Spboudart]

another gen 111n:

It is not as rised as on Noob 111n.

Hard to tell from that pic.
Are you sure it's a gen? Lighting makes the writing looking a bit too whitish....

 

[ALE7575]

Its raised

http://www.chrono24.com/en/panerai/pam-111-luminor-marina-sandwich-dial--seconds-hand-retail--id2008754.htm?id=2008754&picnum=10&tab=pics

Thanks tranz
Yes, it is raised but... actually a lilltle less raised than V3 ??
Moreover it is a J series
It would be interesting have also pics of a N series
Thanks again
ALE

 

[sharrkey]

Thanks tranz
Yes, it is raised but... actually a lilltle less raised than V3 ??
Moreover it is a J series
It would be interesting have also pics of a N series
Thanks again
ALE
s

N series post previous pageopcorn:

 

[ALE7575]

Few pics Ale of a Gen 111n that sold on Watchuseek
Look's slightly raised to me

another gen 111n:
It is not as rised as on Noob 111n.

Hard to tell from that pic.
Are you sure it's a gen? Lighting makes the writing looking a bit too whitish....

Thanks friends
What a good support from the PCTeam !!

Yes I agree with you it seems raised but not as raised as V3
ALE

 

[sharrkey]

Look's slightly raised to me[/QUOTE]

 

[ALE7575]

More pics PAM 111 N series GEN

PAM 111 N en venta
http://www.rolexforums.com/showthread.php?t=246383
This seems even less raised

OMG! We would have to consult in other forums too, in order to have more opinions.
I'm going to put a thread in RG and RWG

 

[Prosperity888]

This is a wonderful thread guys! Many thanks to Ale and all the others for being so helpful on this matter. I shall post and share if I found out any new discoveries as well. Once again, thank you all so so much.

 

[ALE7575]

I have prepared a comparison pic to see the differences
The watch on the left side is a Toro V3 Noob seemingly with much raised
The watch on the right side is the gen N series in above post mentioned, seemin¡gly few raised
Indicated by black arrow you can see few difference
Indicated by the orange arrow seemingly there is more difference. But likely it is due to the reflection of the crystal in the upper side of the bezel.
Seeing this pic there is differences, but the issue seems not as big as previously discussed. Bear in mind this is the found GEN seemingly less raised.
We will wait for more inputs.
And comments about other aspects please !!

ALE

 

[sharrkey]

Here's a couple of pics from my last Noob 111M at different angles, notice the difference in heights with reflections

And here's a Qc pick for the Noob v3

Sent from my iPhone using Tapatalk

 

[thran]

I just went into the store and tried on a Pam 111 N and its raised for sure of course to the eye I cant compare it to the qc pics of the macro

The person helping me is a friend of mine and says once i get mine we can compare

 

[ALE7575]

Here's a couple of pics from my last Noob 111M at different angles, notice the difference in heights with reflections

Manay thanks Sharrkey very useful pics (and nice!!)
Therefore you agree with me.
And now we have some explanation to this "issue" due to the reflections when the angle pic is changed. Isn't it ?

ALE