• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

{*PCTeam*} New Radiomir KW PAM388 [QC pics allowed]

ALE7575

Section Mod
Section Moderator
Certified
18/1/11
19,846
423
83
PAM 127 is most likely the next batch from Noob which is just to be released at the end of September

Regarding KW PAM 388 and 505 I honestly think that Seagul version is more accurate and better movement. Obviously you have the issue of screws. And maybe you would need to get some screws from Panatime....
I cannot decide... it is Up to you

ALE
 

marcogumbo

Active Member
14/8/13
240
0
16
I had the same dilemma and I decided to go for the seagull movement...


Sent from my iPad using Tapatalk HD

I did the same, Panasol, and the Panatime screws, and yet another new screwdriver :)

A word of advice on the screwdriver....if there is any play at all in the screw-slot, the screwdriver tip can be thickened by using a Dremel or grinder to shorten the tip...making it wider (and making a good sharp rectangular tip, if that makes sense)
I think, from reading posts, that the trick will be to have a good grip on the screw without having to force it down too much, which would tend to strip the case threads, or the screws. my $.02
 

ALE7575

Section Mod
Section Moderator
Certified
18/1/11
19,846
423
83
I did the same, Panasol, and the Panatime screws, and yet another new screwdriver :)

A word of advice on the screwdriver....if there is any play at all in the screw-slot, the screwdriver tip can be thickened by using a Dremel or grinder to shorten the tip...making it wider (and making a good sharp rectangular tip, if that makes sense)
I think, from reading posts, that the trick will be to have a good grip on the screw without having to force it down too much, which would tend to strip the case threads, or the screws. my $.02

This is a very good idea !!
I always realize that the screwdriver is very thin to match the slot of the screw. It is a good idea to file the point of the screwdriver to get the same thickness of the width of the slot !!

Thanks for sharing
ALE
 

tuan8881

Do not accept unsolicited offers
7/5/14
8
0
0
hi all, I am a Vietnam, I would love pam 388 but in our country is very high taxes, the 30% of the order value. So how do I have to own it at the cost of not too high. eg 308usd/pam388 kuvarsit v2 -> Vietnam when the price to 450 usd
 

tuan8881

Do not accept unsolicited offers
7/5/14
8
0
0
[COLOR = Sultan Brunei; 1844490]? Khai báo giá tr? $ 50 [/ B]
a good idea, and transport issues