• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

{*PCTeam*} KW Pam 389 pearl mod in photos

P

PolonusTM

I'm Pretty Popular
Supporter
Certified
24/5/10
2,115
656
113
WatchPorn said:
did you lose any lume??
Click to expand...

Not noticeable change in lume if at all..

AiwYp29.jpg
 
V

vader1

Known Member
22/12/13
131
0
0
can someone pls explain? i dont see any difference what so ever....whats wrong with my eyes
 
D

Drkitch109

Active Member
18/9/12
208
11
18
vader1 said:
can someone pls explain? i dont see any difference what so ever....whats wrong with my eyes
Click to expand...

The KW 389 pearl is significantly domed (as is the 382). The gen pearl is slightly domed and since the domed pearl on the KW is more pronounced it can be an easy tell. Polonus took some material off the pearl with a dremel like tool took flatten it with pretty great results.

Will be interesting to see how things progress with KW/V6 as the pearl on the 569 is stellar based on initial pics. Not sure if any modders out there can rebuild PAM pearls to gen spec. I've reached out to a few with no success.

As for your eyes...can't help you there [emoji16]
 
W

WatchPorn

Active Member
14/1/15
264
36
28
will that dremel polishing cone fit on my standard drill lit a drill bit?? or do I need to get a polishing tool/drill....whatever you call them?? thanks gents!
 
P

PolonusTM

I'm Pretty Popular
Supporter
Certified
24/5/10
2,115
656
113
WatchPorn said:
will that dremel polishing cone fit on my standard drill lit a drill bit?? or do I need to get a polishing tool/drill....whatever you call them?? thanks gents!
Click to expand...

I used very cheap multi purpose tool. Felt bits were bought separately - so it is a standard.
 
W

WatchPorn

Active Member
14/1/15
264
36
28
Went ahead and did this too. Thanks for the DIY!
870c2ee27649d03b5e60719a0f442478.jpg

f9e07845300fc033df7d0551f70a2cca.jpg


Great mod because the pearl is an easy tell. [emoji106]
 
N

Norrie

I'm Pretty Popular
Certified
24/5/12
2,063
64
48
The OP saying that he thought the felt tip would matte it while flattening it down makes me think… Could a felt dermal tip maybe matte down a PVD/DLC case after a cape cod treatment? Hmmm…
 
R

repigator

Active Member
DO NOT TRADE WITH ME
28/7/15
443
1
0
Hey there! I have a 571 with glossy pearl. Looks like there is a layer of lacquer on it. Will I be able to matte out the gloss you reckon?
 
Raddave

Raddave

Most Delicious of all Nipples!
Staff member
Global Moderator
Administrator
Certified
24/12/11
67,017
18,593
113
repigator said:
Hey there! I have a 571 with glossy pearl. Looks like there is a layer of lacquer on it. Will I be able to matte out the gloss you reckon?
Click to expand...

The pearl should be easy with a qtip and a little (LITTLE) actone on it
 
R

repigator

Active Member
DO NOT TRADE WITH ME
28/7/15
443
1
0
I tried the felt tip dremel tool DIY and I think I might have gone a little too deep. Am thinking if I could refill it slightly with clear enamel? Will the tamiya ones work?
 
E

ernien

Renowned Member
Certified
23/9/12
785
163
43
Ontario, Canada
I relumed my 382 pearl with a mix of 2 part epoxy and a little bit of white humbrol enamel paint. I even put in a bit of white/green lume powder. I just mixed it up well and applied some with a toothpick and allowed it to flow and fill up the pearl "cup." I removed the old pearl first
 
You must log in or register to reply here.
Top Bottom