- 18/1/11
- 19,846
- 423
- 83
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Pam372 the other one (pictorial)
- Thread starter sardonix
- Start date
I have gone for the Angus version. The dial pops much more than the h factory version. Many pics of the h version the dial seems a bit lost behind the crystal. If the gold cannon pin and blue screws of the movement plates bother me it's an easy fix. Big question is which Malio strap do I buy for this watch? How about a thick "74" strap?
I mean... They're so similar to each other that you need to zoom in on small parts to call out tiny differences.
- 18/1/11
- 19,846
- 423
- 83
are there PAM models like this in 44mm?
i like the 372 and the 127 much but they are all in 47mm, which my wrist can not handle.
i like the 372 and the 127 much but they are all in 47mm, which my wrist can not handle.
- 18/1/11
- 19,846
- 423
- 83
are there PAM models like this in 44mm?
i like the 372 and the 127 much but they are all in 47mm, which my wrist can not handle.
You would need go to Luminor 1950 types, but no domed crystals
PAM 312-320-359-386 ....
ALE
the kw 312 is next in my list, very soon!
I really want that dome look and the vintage font and gold hands.
and the BREVATATTO case back! sadly the 372 got no secs subdial and is in 47mm.
I really want that dome look and the vintage font and gold hands.
and the BREVATATTO case back! sadly the 372 got no secs subdial and is in 47mm.
- 18/1/11
- 19,846
- 423
- 83
the kw 312 is next in my list, very soon!
I really want that dome look and the vintage font and gold hands.
and the BREVATATTO case back! sadly the 372 got no secs subdial and is in 47mm.
With KW 312 you will not get disappointed. It is one of the best current replicas. The finish is awesome
And KW PAM 359 is the same
ALE
- 18/1/11
- 19,846
- 423
- 83
- 18/1/11
- 19,846
- 423
- 83
Angus has already confirmed that next orders will have the mods included:
- Chromed CP
- Chromed movement screws
Before, you were able to make the mods. Now, it is easier to decide.
Just my taste and my opinion. But please decide by yourself
ALE
- Chromed CP
- Chromed movement screws
Before, you were able to make the mods. Now, it is easier to decide.
Just my taste and my opinion. But please decide by yourself
ALE
- 18/1/11
- 19,846
- 423
- 83
Perry this is the replica game
Anyway, Angus syas he didn't know (???) about the changes and he had already corrected items in stock.
Maybe you are lucky.
No worries. The mods are easy to apply
ALE
What is the easiest way to remove the blue from the screws? Would a solvent do it? Do the screws unscrew easily?
- 18/1/11
- 19,846
- 423
- 83
Hi Perry
I know that cwazy has removed the blue colour of the PT version screws.
You could ask him
Anyway you could remove one by one the screws and remove blue coating by a very fine sandpaper. P1500 or P2000 grit will work nice and you will get an almost polished surface. After that make some polishing with Cape cod if you like.
ALE
Got my Angus 372 today. The blue engraving on the plates are not very good. The ADE in Swiss Made is all broken up. The E is just a blue line.plus it was shipped with a chip off of one of the case lugs...right near the very tip. Any chance this watch is plated rather than solid SS? Looks like I see an under layer where the surface chipped away.
