I know the feeling. Especially when all my other reps are "virtually" undetectable on the wrist, I've had one that had a similar problem (off by half a click) and it was such an eyesore to ME. It just stared back at me, mocking me lol.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Omega Seamaster 300 Master Co-Axial
- Thread starter stxtf
- Start date
I know the feeling. Especially when all my other reps are "virtually" undetectable on the wrist, I've had one that had a similar problem (off by half a click) and it was such an eyesore to ME. It just stared back at me, mocking me lol.
I hope Adam doesn't mind me using this, but you can see a very well-aligned bezel pearl and 12:00 marker in this first pic, making me even more curious to see if mine is just an angle issue or a bezel/dial problem.
[MENTION=115820]easfarmers[/MENTION]
[MENTION=115820]easfarmers[/MENTION]
I bought it was an angle problem too, because you know how the height of the bezel from the dial is quite high, until I have it on my wrist. Damn
Dont be fooled lads i honestly believe there all the same, rhe markers are not perfect if i look at mine at some angles its off. TDs are being rather crafty with images.
Dear friends, where do you think will be possible to find one of those seamaster 300 spectre rep?, I see pure time asia was shut down. thanks
Same as mine. Really disappointing. Have had it for a month and worn it 0 times. I'll try to sell it in m2m I guess.
Sent from my SM-G900V using Tapatalk
I bought Omega SM300 watch from TD in December and I'm happy with quality and looks. However precision is really bad. I have to adjust watch approximately every 2 days and usually it's 1-3 minutes (not seconds) ahead. I would accept if it's some seconds, but 3 minutes off by 48 hours is definitely too much.
How do you recommend to proceed with the issue? Do TD-s have also warranty for the watches and does anybody have experience in such situations?
Sent from my iPhone using Tapatalk
How do you recommend to proceed with the issue? Do TD-s have also warranty for the watches and does anybody have experience in such situations?
Sent from my iPhone using Tapatalk
i'm thinking about purchasing one, anyone know what mm NATO strap will fit the rep?
Edit: No worries, I just saw that it's 20mm.
Edit: No worries, I just saw that it's 20mm.
So I've got through the QC images for my watch from Ryan at InTime. The alignment and movement seems good (he sent a video of the second movement), but the lume seems pretty bad. What do you guys recommend?
Trust me when I say this. That lume is better than most! The earlier versions had pretty much no lume on the hour and minute hands.So I've got through the QC images for my watch from Ryan at InTime. The alignment and movement seems good (he sent a video of the second movement), but the lume seems pretty bad. What do you guys recommend?
Sent from my SM-G900V using Tapatalk
Merlinski
Getting To Know The Place
I received mine a few days ago. The watch looks very nice, just a really beautiful watch. BUT a few hours after I received it, the pearl on the bezel fell out and I lost it. The factory doesn't want to replace it. I have to purchase a bezel for $25. The other thing is, though the lume on the indices and on the minute and second hand is really very good, the lume on the hour hand is nearly not visible, so not usable to read the time at night or dark conditions :-(
Ryan was very polite but he can't do anything against the factory policy. So I will never buy a watch from this factory, but for sure another one from InTime, probably a Noob. This factory produces super quality.
Ryan was very polite but he can't do anything against the factory policy. So I will never buy a watch from this factory, but for sure another one from InTime, probably a Noob. This factory produces super quality.
Hi, if You can get a bezel replacement for only $25 somehow it sounds great. Imagine if there was no replacement at all. I could well live with that.
The lume on these in general isn´t good at all. You either have to accept is or spend +- $130 to have it re-lumed, it will be stunning bright afterwards. (for doing a re-lume the rep has to be disassembled first, the old lume removed etc.)
The lume on these in general isn´t good at all. You either have to accept is or spend +- $130 to have it re-lumed, it will be stunning bright afterwards. (for doing a re-lume the rep has to be disassembled first, the old lume removed etc.)
Ironronnie
Active Member
- 24/1/16
- 391
- 7
- 18
There is a possibility to change the myota movement?ai read that this movement is stutter and not quite..I think that other flaws is not important imo..
Merlinski
Getting To Know The Place
Yes, I'm thinking about it to purchase the bezel insert from Ryan. Just ordered on ebay a pearl alone and will try to mount it. If it fails, I'll order it from Ryan. Because I think it's simplier for me to put a pearl in ther existing bezel than to replace the whole bezel by myself.
Can you tell me where or who would re-lume the hands? It sounds interesting.
Can you tell me where or who would re-lume the hands? It sounds interesting.
Hello guys! If i want to buy the best Rep of this model, which do u recommend me?
Please i have to do a gift
Please i have to do a gift
Merlinski
Getting To Know The Place
Hello guys! If i want to buy the best Rep of this model, which do u recommend me?
Please i have to do a gift
Hi!
As I know there is only one factory producing that model, the V6F. The quality is not bad, the watch looks really amazing, but the QC is imho not very good. You have to check the screws on the bracelet and tighten them. Mine were loose. Also after a few hours of wearing the pearl from the bezel were lost and the factory didn't want to replace it on their cost. A new bezel insert plus the shipping would be at least about $50. I bought a pearl on ebay for $20. Apart from this a very beautiful watch.
and the movement is good? What do u think?
Then, do u recommend me to buy Also new bezel?