Noob Daytona 4130 arrived

[lukko]

I ordered 116520 noob with super clone movement. Also ordered bp dial and Domi will shave it for me. But the center hole looks bigger for me. This will be a problem ? Someone has experience with this mod ?

For you or Domi it's bigger? Because you tell me that Domi has said this. So it's different.

My modder, as i shown here on this topic has install the dial on SA4130 movement and fit, but need to shave on the diameter. If you check some pages back you can find all pic of BP dial on the movement

 

[lukko]

Here BP dial pics

 

[#Roly]

Domi say it’s bigger. And for me it is also bigger. I know that the holes fit. But I want to see photo with hands. I want to be sure that the hole can’t be seen under the hands.

 

[guru]

Domi say it’s bigger. And for me it is also bigger. I know that the holes fit. But I want to see photo with hands. I want to be sure that the hole can’t be seen under the hands.

It all depends how the hands are pointing.
I have not seen this dial on a noob but just look at this pics and make up your mind. I wouldn‘t pay a cent for that big hole. The hole touches almost the T of the Daytona lettering on the BP dial

Sent from my iPad with Tapatalk

 

[KJ2020]

The hole touches almost the T of the Daytona lettering on the BP.

Sent from my iPad with Tapatalk

Good point but maybe you wouldn't notice that on a black dial.

 

[guru]

Good point but maybe you wouldn't notice that on a black dial.

Well, the pinion for the hands are silver....


Sent from my iPad with Tapatalk

 

[#Roly]

https://www.ts-station.cn/mobile/goods.php?ProId=19433

I don’t know how to upload picture but you can see in ts station Daytona with hands and it’s look the same distance to T. Maybe on black dial is not clearly to see.

nothing to do now. I ordered both. There is no refund.

just paid 45 dollars. If not fit I will go Franken.

 

[Rufctr2]

Is there someone who ever tested a GMF Rolex ?
I saw this GMF 116520 and the SEL seams better in pictures :

https://www.ts-station.cn/mobile/goods.php?ProId=25000

 

[MonsieurMax]

Is there someone who ever tested a GMF Rolex ?
I saw this GMF 116520 and the SEL seams better in pictures :

https://www.ts-station.cn/mobile/goods.php?ProId=25000

Lmao they have a very misleading title, it gives the impression they have an a4130 in there until I see it's 15mm thick and it's actually an a7750

 

[markfisher]

This dial seems great:

 

[shotgun]

markfisher Great dial...

 

[majwilliams0308]

Hey guys, I am going to go the route to install the ARF dial and bezel on a Noob. Who is a modder in conus who can do this mod - cutting the feet and moving them? I have the watch in hand, and the dial has been ordered.

 

[TYL88]

Where did u source the arf dial and bezel?majwilliams0308

 

[ExOmegaFan]

My NOOB Daytona 116500 904L finally arrived ....

 

[JDM180]

My NOOB Daytona 116500 904L finally arrived ....

Is that Sub gen or arf ?

Edit : Just seen it's ARF . Nice !

 

[Hedrea]

Hi everyone, any of you gents know other trusted source to get this noob 116500 beside www.intime03.co (they never have it in stock). Many thanks.

 

[lukko]

It all depends how the hands are pointing.
I have not seen this dial on a noob but just look at this pics and make up your mind. I wouldn‘t pay a cent for that big hole. The hole touches almost the T of the Daytona lettering on the BP dial

Sent from my iPad with Tapatalk

You're right, in some pics of genuine black dial on all dials variations seems that sometimes the "daytona" it's closer at central hole, and sometimes not but on BP dial it's really close.

But hey, you can't find an aftermarket dial like this at this price (35-60$) and genuine (chromalight) start from 800$ go over 1000$ .

Personally i would try to build a beautiful daytona with a low budget, so for me this dial it's the best black dial of 116520 you can find a this price (ARF has unfortunally a fat black print on numbers and layout).

Is there someone who ever tested a GMF Rolex ?
I saw this GMF 116520 and the SEL seams better in pictures :

https://www.ts-station.cn/mobile/goods.php?ProId=25000

GMF it's a BP factory with a new name and slightly better products. All the GMF dials on daytona are BP dials.

 

[molivio]

has anyone seen the new 904l daytona with working chrono listed on intime ???? dying to hear feedback

 

[ubzer]

has anyone seen the new 904l daytona with working chrono listed on intime ???? dying to hear feedback

The GMF?

 

[Karlus]

The GMF?

Uses the ole A7750. Here is a thread about the A7750

https://forum.replica-watch.info/fo...51338-rolex-daytona-jf-a7750-29j-vs-a23j-a23j