- 25/3/17
- 4,310
- 3,803
- 113
Question.
Is cyclops of dial looks tilted or misaligned ?
I’m not picky just trying to train my eye. Or it’s just an angle?
It is ok bro. Just pic angle
))
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
New Clean Factory DJ41 3235
- Thread starter ModestBulge
- Start date
It is ok bro. Just pic angle
))Is this time grapher will be a concern? Should I just RL?
don’t want to pay extra money for service right away..
don’t want to pay extra money for service right away..
chrisomatic
Active Member
- 22/6/15
- 265
- 69
- 28
I received the offer to source a Gen Crystal.
B25-7036-3-C1
is this the correct one for the 126334?
B25-7036-3-C1
is this the correct one for the 126334?
Fervid
I'm Pretty Popular
I believe JTime use a lift angle of 52.6 for testing their CF DJ's, so knowing this your amplitude would be a tad higher if they had the same lift angle.
I would say yours is fine, as far as accuracy goes don't expect COSC standards from a clone movement.
Tijdwijzer
Renowned Member
-4 isn't bad. it also will (probably) be different when you're wearing the watch the hole day.
I'm not an expert so I don't have a polishing wheel, does the cape cod change a lot?
chrisomatic
Active Member
- 22/6/15
- 265
- 69
- 28
A few pages before I read that B25-7036-1-C1 is actually the correct Crystal + Gasket. Is the -3 the same?
thanks for your help!
A-wandererX23
Getting To Know The Place
- 5/10/20
- 45
- 63
- 18
Noticed that CLEAN seemed to have improved their gasket. Now it's clearer than usual. I posted some comparison with the new batch and older batch with that ugly white gasket. I have received one of them and can confirm new batch was better. Not saying it's near VSF or GEN but definitely an improvement. You can see the newer ones have a reflection of the minute markers on the dial as per Gen.
Thought I share my findings here
Thought I share my findings here
ApIcedOutt
Known Member
- 5/6/19
- 102
- 12
- 18
Noticed that CLEAN seemed to have improved their gasket. Now it's clearer than usual. I posted some comparison with the new batch and older batch with that ugly white gasket. I have received one of them and can confirm new batch was better. Not saying it's near VSF or GEN but definitely an improvement. You can see the newer ones have a reflection of the minute markers on the dial as per Gen.
Thought I share my findings here
I ordered one 2 days ago and got QC
Maybe you can tell me if this one looks like this new batch as well? Not sure from pictures.
TD said it should be new batch.
ApIcedOutt
Known Member
- 5/6/19
- 102
- 12
- 18
I have upgraded my CF v2 blue dial with a gen xtal. What do you think? gen dw is next.
Would you say it’s worth it?
Sent from my iPhone using Tapatalk
john doe iii
Active Member
Fervid
I'm Pretty Popular
Nice find and I think you're right, I had a look at the new Clean 116610 V2 subs on JTime and the gasket looks a lot better.
A-wandererX23
Getting To Know The Place
- 5/10/20
- 45
- 63
- 18
Nice! I still haven't found the improved gasket on the GMTs. Guessing they have too many old stock but the datejust I bought definitely had an improved gasket. Submariner as well seem to have better gaskets. Let's hope they continue it. I have talked with Chinese dealers and they have told me CLEAN was aware that people noticed they were using inferior white gaskets. They probably did a secret update again like with their bezels but be careful. There a lot of QC problems. Misaligned bezel inserts, crooked hour markers, etc.
With the gen xtal it definitely looks better. It's a more deep blue, more clear.
A gen xtal is 400 euros. Is it 400 euros better? I don't think so.
However, for me it is worth it because a gen crystal retains most of the value and now I have a more close gen look. Will you do it again? YES
Tijdwijzer
Renowned Member
Mr.pitt
Known Member
- 28/4/21
- 161
- 73
- 28