Few weeks ago I used my espresso machine steamer to clean my watch. now its buttery smooth lol
Sent from my iPhone using Tapatalk
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
New Clean Factory DJ41 3235
- Thread starter ModestBulge
- Start date
Few weeks ago I used my espresso machine steamer to clean my watch. now its buttery smooth lol
Sent from my iPhone using Tapatalk
I bought a Clean DJ 41(v1 fluted bezel) in November 2021 with Jtime, GL'd and received it last month, but there is a flaw that was not quite perceivable on the QC pictures that is annoying me a bit. The bezel at 6 o'clock does not lie flush with the case and there's a visible gap between them, I'm almost sure that's not normal. On top at 12 o'clock, it is perfectly fine with no visible gap between bezel and the case though. I'd love to get some help to know if perhaps there is something possible to be done in my case.
Here are some pics of the problem:
On top is not visible:
The QC side pictures had not spot very well the gap:
What do you guys think? Is it fixable? Thanks in advance..
Here are some pics of the problem:
On top is not visible:
The QC side pictures had not spot very well the gap:
What do you guys think? Is it fixable? Thanks in advance..
- 10/12/06
- 2,835
- 1,094
- 113
Get this for $15.99 from amazon
https://www.amazon.com/dp/B073PW85HS?psc=1&ref=ppx_yo2_dt_b_product_details
All you need is to press the bezel down a bit more and you can achieve it very easy with this tool mentioned.
john doe iii
Active Member
I bought a Clean DJ 41(v1 fluted bezel) in November 2021 with Jtime, GL'd and received it last month, but there is a flaw that was not quite perceivable on the QC pictures that is annoying me a bit. The bezel at 6 o'clock does not lie flush with the case and there's a visible gap between them, I'm almost sure that's not normal. On top at 12 o'clock, it is perfectly fine with no visible gap between bezel and the case though. I'd love to get some help to know if perhaps there is something possible to be done in my case.
Here are some pics of the problem:
On top is not visible:
The QC side pictures had not spot very well the gap:
What do you guys think? Is it fixable? Thanks in advance..
Simple fix. See if you can press it down as it was not pressed all the way. Worst case bring it to a smith and they will do it for $10 usually.
Sent from my iPhone using Tapatalk
NightShot
Getting To Know The Place
- 24/10/20
- 61
- 25
- 18
-2 yk:/Clean厂41志改高透镜面3235机芯来袭 http://m.youku.com/v_show/id_XNTgxO...==&sharekey=44603e8e310b4909fabe3afcdeaffa388 长按复制此口令＄Bwzw2Y9XhVY＄，打开【优酷APP】就可以看了~！vidéo joint clean
Tijdwijzer
Renowned Member
clean seems to have a ‘sunken’ 6 at the 12 o clock digits?
yes you're right, its 0,01mm down....
Considering it is not that hard to change the bezel on the DJ (just applying pressure), Clean Factory should sell the updated v2 bezels separately for those who bought v1 change them by themselves. I don't think the updated bezel is enough reason to buy the same watch again, but I think it's quite reasonable to buy the bezel alone and DIY.
6 in 60 at 12 o clock of the dial is slightly shifted downwards. and this is common in all QCs i’ve seen for all CF dials.
Ah i See. Well I’ll start worrying about that once they got rid of the bigger things haha
Gesendet von iPhone mit Tapatalk
indeed, not a dealbreaker in any way to this great watch, just something i noticed
john doe iii
Active Member
Just changed my xtal to gen. Things to note, stock gasket is 1mm thinner than gen gasket. Bezel came out too easy. Gen gasket is 1mm taller. Had to shave the gen gasket about 0.5mm in order to press the bezel back.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Thanks for this information - very helpful. Did you try reinstalling the rep gasket at all, or did you decide the gen xtal and gen gasket had to be installed together to work effectively (albeit after shaving the gen gasket)?
john doe iii
Active Member
I did gen xtal with rep gasket = no issues - but gasket color is different so I wanted to use the gen
Sent from my iPhone using Tapatalk
You are absolutley right. Maybe you can buy only the bezel from a TD but it will be overpriced for sure. More around 120 USD than 20 USD as would be reasonable. Dont forget slightly overpriced shipping costs as well. TDs and the factorys want to make money as well
You'll get used to it
Last edited: