MP Factory 15510ST??

[Gabriele75rn]

Ah, so those are your pics of the watch in hand? That was fast. Do you have calipers to measure the thickness? 15400 should be 9.8mm and 15500/15510 10.5mm.

So Hont got the wrong watch for me at first. On a side note, the MPF 15500 has the same metallic dial finish, and looks way better than the ZF/APSF.

@legend thoughts compared to your gen 15500 grey?

QC Video

Zf 15500 v2 = 10,5mm
Just measured

 

[Fettekatze]

Zf 15500 v2 = 10,5mm
Just measured

Ah I misread, thought the green dial pics were yours.

The blue dial looks great too from the video. Someone should order it so we get pics haha.

 

[legend]

Ah, so those are your pics of the watch in hand? That was fast. Do you have calipers to measure the thickness? 15400 should be 9.8mm and 15500/15510 10.5mm.

So Hont got the wrong watch for me at first. On a side note, the MPF 15500 has the same metallic dial finish, and looks way better than the ZF/APSF.

@legend thoughts compared to your gen 15500 grey?

QC Video

From the pic, the dial looks very nice especially compared with the APSF/ZF ones.
I do not know if it is exact to the gen but it certainly looks very passable. Happy to see this update, thank you for sharing.

 

[grillbrill]

Ah, so those are your pics of the watch in hand? That was fast. Do you have calipers to measure the thickness? 15400 should be 9.8mm and 15500/15510 10.5mm.

So Hont got the wrong watch for me at first. On a side note, the MPF 15500 has the same metallic dial finish, and looks way better than the ZF/APSF.

@legend thoughts compared to your gen 15500 grey?

QC Video

This grey is greyt. Congratulations.

 

[blackmark]

am i alone, but is the logo/name on dial very off or shines weird in the light?

 

[Ernesteka]

For this price is a nice Rep. Dial is far from Gen, but looks nice and has good Sunburst. Finishing is good and rotor not too noisy.

Bracelet has no sharp edges, but the clasp is really crooked and cheap.

It put it next to my APS 15400 with Gen Dial for Comparison.

 

[oceaon]

Hey all. @EggF00yung purchased this from @Fettekatze, but it was too big for him, so I took it off his hands. I just got it and compared it to my 15500 black gen so you could see. Granted, mine is a 2022 dial, and it's shinier than previous years, according to Legend. But this has a fantastic burst.

Video:

 

[Gabriele75rn]

Ciao a tutti. @EggF00yung l'ha acquistato da @Fettekatze, ma era troppo grande per lui, quindi gliel'ho tolto dalle mani. L'ho appena preso e l'ho confrontato con il mio 15500 black gen in modo che tu possa vedere. Certo, il mio è un quadrante del 2022 ed è più brillante degli anni precedenti, secondo Legend. Ma questo ha un'esplosione fantastica.

Video:

The dial of 15510 is better than 15500... and this zf is not so bad compared to gen

 

[oceaon]

The dial of 15510 is better than 15500... and this zf is not so bad compared to gen

That is not ZF. That is MPF

 

[Fettekatze]

ZF and gen for reference:

 

[Gabriele75rn]

Questo non è ZF. Questo è MPF

Ah sorry. MPF stock or ZF 15510 + dial MPF?

 

[Fettekatze]

Ah sorry. MPF stock or ZF 15510 + dial MPF?

Gen 15500 on left, MPF dial + ZF case on right.

 

[gigi264]

Any good? I like the price 300 dollar shipped.

 

[legend]

Any good? I like the price 300 dollar shipped.

If you like it, it’s good enough. You don’t need the opinion of the community for a watch you like.

 

[SOLEX]

Any good? I like the price 300 dollar shipped.

Are the MPF dimensions correct to gen? As we know the 15510 had a slimmer bracelet, and a slightly different case that ZF and APSF did not update yet.

 

[Autobús]

Noone has released an updated case and bracelet for the 15510 yet. As far as that goes I believe your only options would be a custom cnc set or have a 15500 slimmed down by a modder.

 

[legend]

Noone has released an updated case and bracelet for the 15510 yet. As far as that goes I believe your only options would be a custom cnc set or have a 15500 slimmed down by a modder.

I’ll be posting a thread of a franken 15510 with gen green dial and datewheel, custom second hand, custom case and of course a thinner bracelet soon. It’s currently in the works.
The custom second hand can now be supplied for any member wanting the correct 15510 second hand.

 

[SOLEX]

I’ll be posting a thread of a franken 15510 with gen green dial and datewheel, custom second hand, custom case and of course a thinner bracelet soon. It’s currently in the works.
The custom second hand can now be supplied for any member wanting the correct 15510 second hand.

As a fan of your work....Curious how do you slim the bracelet? I am unsure of the newer bracelet dimensions, but if it tapered down from 18mm to 16mm for example, just curious how that is done.

 

[legend]

As a fan of your work....Curious how do you slim the bracelet? I am unsure of the newer bracelet dimensions, but if it tapered down from 18mm to 16mm for example, just curious how that is done.

It’s a custom made bracelet sir. I didn’t thin it myself. I used the dimensions of the bracelet on my gen for the measurements.

 

[SOLEX]

It’s a custom made bracelet sir. I didn’t thin it myself. I used the dimensions of the bracelet on my gen for the measurements.

Nice, so it was custom made bracelet. Which is something I was suspecting! I have a gen 15300or and have been looking for a custom bracelet so can I PM you to discuss? or is that beyond what you do?