- 15/8/22
- 485
- 221
- 43
Dial looks a little grey to me. curious, the gen moonphase can be installed on v2 now?What do you guys think of this dial?
Custom dial, custom hands, gen moonphase, thinned case
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Mods to PP 5712 PPF V2
- Thread starter jm_brc_7057
- Start date
- 16/6/22
- 89
- 40
- 18
It's a sw dial w some blue hue. It does look grey. Wasn't sure if it was just me. And yes it has a gen moonphase
- 16/6/22
- 89
- 40
- 18
The sw dial does seem blueish at certain angles. Here are some more photos of it next to the stock ppf v2 dial for comparison.
Here are some photos of the ppf v2 dial by itself. When the dial was on the watch I did see some purple hue, but the dial uninstalled seems amazing, not sure why (last pic is of the watch w ppf dial)
Here are some photos of the ppf v2 dial by itself. When the dial was on the watch I did see some purple hue, but the dial uninstalled seems amazing, not sure why (last pic is of the watch w ppf dial)
Why the red dots on the power reserve don’t look red or is the angle ?The sw dial does seem blueish at certain angles. Here are some more photos of it next to the stock ppf v2 dial for comparison.
Here are some photos of the ppf v2 dial by itself. When the dial was on the watch I did see some purple hue, but the dial uninstalled seems amazing, not sure why (last pic is of the watch w ppf dial)
- 16/6/22
- 89
- 40
- 18
Yes, maybe, but not plenty imho. This dial color looks similar to my PPFv4 5711. It's definitely more bluish and greyish than stock v1 but I still miss some green to my taste.
- 16/6/22
- 89
- 40
- 18
Found a good photo of a gen so I put them next to each other
And one with a 5711
And one with a 5711
What's the 5711?Found a good photo of a gen so I put them next to each other
And one with a 5711
@Heisenberg's comparison pics are still the best I know for older gen, stock v1 and v2:Found a good photo of a gen so I put them next to each other
And one with a 5711
New PPF 5712 with PP240 Super Clone.....
So I guess it’s best to wait for V3
forum.replica-watch.info
- 16/6/22
- 89
- 40
- 18
Yes true. But i'm comparing the sw dial. Not the v1 or v2@Heisenberg's comparison pics are still the best I know for older gen, stock v1 and v2:
New PPF 5712 with PP240 Super Clone.....
So I guess it’s best to wait for V3
Yep. That's why it would be the best to see and compare the gen and the SW v2 together in the same pics as @Heisenberg did with his gen and PPF v1/2.
- 16/6/22
- 89
- 40
- 18
Too bad no gen on my end. If anyone could send me one I'll take very detail photos and might send it back to you
- 15/8/22
- 485
- 221
- 43
I felt the dial shows different colors from different angles. Could you shed some light on how the gen moonphase is being installed? seems on the forum many ppl claim it's not doable...
It’s a stock dial, sw dial has markers that are more roundedWhat do you guys think of this dial?
Custom dial, custom hands, gen moonphase, thinned case
- 15/8/22
- 485
- 221
- 43
Hi, could you shed some light on how the gen moon phase disk could be installed properly? Thanks!The best and safest way is to simply apply an overlay. I wouldn't risk installing the gen moon phase disk yourself if you don't have the tools to gauge the moon phase disk's fit.
The fat bezel is just as noticeable as the dial colorFound a good photo of a gen so I put them next to each other
And one with a 5711
- 16/6/22
- 89
- 40
- 18
If you look at Heisenberg comparison, it's not reallt fatter than gen. It's probably the angle of my photos
didn't know the V1 had faux pushers .... i though it was working :-(
then V2 with V1 dial
I have version one and had the dial reses done as well as the beveled indiciesa shortended crown etc. Who can make the case thinner?
Is that even possible?May be the best mod would be to get a v1 and have it thinned LOL....
