• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Gen Daytona vs Noob V1-V2 and V2.2 Daytona vs ARF V2 Daytona

P

philwongnz

I'm Pretty Popular
27/1/14
1,798
660
113
Robi01 said:
Can arf daytona accept noobs dial and bezel with no problem?
Alredy have arf and Im asking if someday i buy noob and replace dial and bezel so i can SEL my arf with noob bezel and dial lol, or give it as a gift to someone
Click to expand...
I read is 1mm too wide and also the dial feet needs to be cut as they have different movements

Sent from my SM-N950F using Tapatalk
 
M Scott

M Scott

Renowned Member
22/9/18
857
1,163
93
Robi01 said:
Can arf daytona accept noobs dial and bezel with no problem?
Alredy have arf and Im asking if someday i buy noob and replace dial and bezel so i can SEL my arf with noob bezel and dial lol, or give it as a gift to someone
Click to expand...

philwongnz said:
I read is 1mm too wide and also the dial feet needs to be cut as they have different movements
Click to expand...

As asked, a Noob dial will fit an ARF case

But an ARF dial is 1mm too large in diameter for a Noob case, and would have to be cut on a lathe as shown in the post that I linked above.
 
  • Like
Reactions: sniffti and Bobi01
M Scott

M Scott

Renowned Member
22/9/18
857
1,163
93
Robi01 said:
Arf cutted pushers only for gold models,i got arf 2 weeks ago and pushers still long
Click to expand...

Pretty sure that I saw a new one with shorter pushers, just can't remember where right now.
 
D

Duckber

I'm Pretty Popular
16/8/19
1,585
868
113
_201909191544311214ed2b6a49cd8371.jpg


Is my ARF Daytona in this QC picture v1 or V2? Bezel doesn't seem like the upgrade but that might be due to distance, would love some input.
 
Last edited:
M Scott

M Scott

Renowned Member
22/9/18
857
1,163
93
Duckber said:
Is my ARF Daytona in this QC picture v1 or V2? Bezel doesn't seem like the upgrade but that might be due to distance, would love some input.
Click to expand...

I would say V2 because it has the newer, shorter Pushers.
 
Bobi01

Bobi01

Respected Member
2/2/19
3,913
3,446
113
Can this be polished on lugs,,i scratched it with replacing strap,some advice how to do it,tnx
 
G

gumwatch

Getting To Know The Place
31/12/18
21
1
0
Hey guys, can someone give me advise for the best 116520 (black dial) out there?
 
S

Swiss Maiden

Getting To Know The Place
20/9/19
87
21
8
Greetings gentlemen,

I would greatly appreciate some feedback regarding these V3 BLACK Dial pictures. (This is my first watch ever, so I am humbly trying to consult with the actual experts.)

My main considerations are:

1.) It appears it has the thinner "V2.2" subdials. I just want to DOUBLE check that these are in fact the more "gen-like" subdials.

Additionally, since these are some of the very first pics we obtain for the black dial v3, it would greatly benefit the community if someone like Mr Scott can sketch out some lines and compare it with a gen (or even a v3 white* dial).

2.) It appears to have the updated V3 bezel. However, is it adequately aligned? (What do you guys think about the white paint, to my eyes it seems a little thinner more "gen-like"?)

3.) It appears that the SELs are kinda rough, in particular the bottom one.... Thoughts on them and the clasp?

4.) Dial and subdials appears to have crisp printing, but the Daytona red seems a tad too dark to me.

Any other feedback you seasoned enthusiasts like or dislike on this specific V3 watch?

Thank you very much for the help and kind attention!!!!

Links:

https://clickpix.org/image/0926-1.N4hv
https://clickpix.org/image/0926-2.NMn1
https://clickpix.org/image/0926-3.Nsuj
https://clickpix.org/image/0926-4.NvZ4
https://clickpix.org/image/0926-5.N7II
https://clickpix.org/image/0926-6.NEXc
https://clickpix.org/image/0926-7.NNxX
https://clickpix.org/image/0926-14.NfWi
 
Bobi01

Bobi01

Respected Member
2/2/19
3,913
3,446
113
Swiss Maiden said:
Greetings gentlemen,

I would greatly appreciate some feedback regarding these V3 BLACK Dial pictures. (This is my first watch ever, so I am humbly trying to consult with the actual experts.)

My main considerations are:

1.) It appears it has the thinner "V2.2" subdials. I just want to DOUBLE check that these are in fact the more "gen-like" subdials.

Additionally, since these are some of the very first pics we obtain for the black dial v3, it would greatly benefit the community if someone like Mr Scott can sketch out some lines and compare it with a gen (or even a v3 white* dial).

2.) It appears to have the updated V3 bezel. However, is it adequately aligned? (What do you guys think about the white paint, to my eyes it seems a little thinner more "gen-like"?)

3.) It appears that the SELs are kinda rough, in particular the bottom one.... Thoughts on them and the clasp?

4.) Dial and subdials appears to have crisp printing, but the Daytona red seems a tad too dark to me.

Any other feedback you seasoned enthusiasts like or dislike on this specific V3 watch?

Thank you very much for the help and kind attention!!!!

Links:

https://clickpix.org/image/0926-1.N4hv
https://clickpix.org/image/0926-2.NMn1
https://clickpix.org/image/0926-3.Nsuj
https://clickpix.org/image/0926-4.NvZ4
https://clickpix.org/image/0926-5.N7II
https://clickpix.org/image/0926-6.NEXc
https://clickpix.org/image/0926-7.NNxX
https://clickpix.org/image/0926-14.NfWi
Click to expand...

Oof that SEL recession too low i have head pains of wrong SELs
 
You must log in or register to reply here.
Top Bottom