- 13/10/16
- 3,917
- 2,394
- 113
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Decal printed dial
- Thread starter Bart Cordell
- Start date
[mention]chrome72 [/mention] for the lume I have an disrespectful idea if you don’t have manual skill (like me) .. in my kuvarsit 6542 the lume seem a fabbric velor cut with hollow cutter and than glued on the plot indices.
See pic below
See pic below
[mention]chrome72 [/mention] for the lume I have an disrespectful idea if you don’t have manual skill (like me) .. in my kuvarsit 6542 the lume seem a fabbric velor cut with hollow cutter and than glued on the plot indices.
See pic below
interesting idea....the texture is good
Last week I achieved to print this ... negative-gilt 6610 Red-Depth dial ...
I still have to reprint the "50m=165ft" in red but, IMHO, I'm pretty close to an achivement ...
I meant to quote this with my reply above...
- 13/10/16
- 3,917
- 2,394
- 113
Sorry ... I saw your post but didn't know about which dial it was ...
I will check next week and post here ... it's a laser copyer
Thanks! The printer I am using is a Toshiba 2505AC, which was a huge upgrade over the Canon machine I had before, but each brand might improve their hardware from time to time, so it is never a bad idea to keep an eye out for best performing machines.
- 13/10/16
- 3,917
- 2,394
- 113
Still playing with Doxa dials ...
Last week I found a new method to apply the lume and achieved to make something nice for "the Doxa guy" himself, Dr Pete McClean Millar
Last week I found a new method to apply the lume and achieved to make something nice for "the Doxa guy" himself, Dr Pete McClean Millar
- 13/10/16
- 3,917
- 2,394
- 113
Not a decal dial but another way to use film-free decals ... very convenient for electrolytic engraving ...
Guys late on the game of decal :-(
Please anyone have a 6542 high resolution cliche’/pic/drawing ?
I can’t found a good one .
Thank you
Please anyone have a 6542 high resolution cliche’/pic/drawing ?
I can’t found a good one .
Thank you
- 13/10/16
- 3,917
- 2,394
- 113
6538 2 lines ... waiting for the handset to lume the dial with matching color ...
Read through pretty much all the tutorials I could find (including the whole of this awesome thread), and decided to try my hand at doing a decal dial for my space-dweller build:
For the dial, I used 28.5mm ETA dial blanks from Ofrei, and then I used Sunnyscopa inkjet decal paper from Amazon. My printer is a Canon Pixma Pro-100 which I use for photo prints, so it’s able to do quite high quality decals - definitely surprised me at how crisp it was once it was applied.
To prep the dial, I soaked it in acetone to remove the old paint, and then sanded from 400-1200 grit to smooth off and sealed the brass with clear coat. I then hit the dials with a few layers of gold spray paint, and let that dry fully before applying the decal.
The decal designs I did in illustrator, which I then exported as 2400dpi PNGs and dragged into a US letter sized document in photoshop also at 2400 DPI. I did a few dial sizes—the dial blanks are at 28.5mm so I did a row sized 28.1mm and one sized 28.3mm, which was the one I applied to the dial:
After printing out the decal sheets, I let the ink dry overnight before hitting it with 4-5 layers of matte clear coat, which I remember reading about on here or RWG as a good way to prevent the ink from running.
To get the white print for the “Space-Dweller” text, I applied a tiny amount of white acrylic paint (I used some hi-flow paint that I had left over, but as long as the layer isn’t too textured it will work). I got really lucky with the paint placement to be honest; it could be a hair higher so the 3’o clock marker would be aligned with the notch.
The print quality really surprised me—with a loupe examination (pictured) the print is super sharp and definitely holds up. I think adding the gold spray paint at the back also makes the dial more attractive overall.
Now to do some gloss clear coat and add lume—it’ll be my first time doing lume so gotta get in some practice first.
Other dial designs on the same sheet:
Serpico 6538
Serpico 1016 (might have to redo this to the chapter ring version)
Early Tiffany print 6538
Sent from my iPhone using Tapatalk
For the dial, I used 28.5mm ETA dial blanks from Ofrei, and then I used Sunnyscopa inkjet decal paper from Amazon. My printer is a Canon Pixma Pro-100 which I use for photo prints, so it’s able to do quite high quality decals - definitely surprised me at how crisp it was once it was applied.
To prep the dial, I soaked it in acetone to remove the old paint, and then sanded from 400-1200 grit to smooth off and sealed the brass with clear coat. I then hit the dials with a few layers of gold spray paint, and let that dry fully before applying the decal.
The decal designs I did in illustrator, which I then exported as 2400dpi PNGs and dragged into a US letter sized document in photoshop also at 2400 DPI. I did a few dial sizes—the dial blanks are at 28.5mm so I did a row sized 28.1mm and one sized 28.3mm, which was the one I applied to the dial:
After printing out the decal sheets, I let the ink dry overnight before hitting it with 4-5 layers of matte clear coat, which I remember reading about on here or RWG as a good way to prevent the ink from running.
To get the white print for the “Space-Dweller” text, I applied a tiny amount of white acrylic paint (I used some hi-flow paint that I had left over, but as long as the layer isn’t too textured it will work). I got really lucky with the paint placement to be honest; it could be a hair higher so the 3’o clock marker would be aligned with the notch.
The print quality really surprised me—with a loupe examination (pictured) the print is super sharp and definitely holds up. I think adding the gold spray paint at the back also makes the dial more attractive overall.
Now to do some gloss clear coat and add lume—it’ll be my first time doing lume so gotta get in some practice first.
Other dial designs on the same sheet:
Serpico 6538
Serpico 1016 (might have to redo this to the chapter ring version)
Early Tiffany print 6538
Sent from my iPhone using Tapatalk
- 13/10/16
- 3,917
- 2,394
- 113
@backstOp
How crispy ... congrats ???? you did great job with Illustrator !!!
I wish it could be possible to get such a result with laser printers and film free decals
How crispy ... congrats ???? you did great job with Illustrator !!!
I wish it could be possible to get such a result with laser printers and film free decals
You hand painted the white? if so thats amazing
Last edited:
Thank you! I think the sharpness is really a function of the printer more than using illustrator, although doing the designs as a vector is a much easier process than using the 1px brush in Photoshop.
I’m having some trouble with adhesion though-it seems like I may have applied the gloss spray a little too quickly after applying the decal, so it’s starting to peel off. I should wait for it to dry at least 24 hours before spraying, right?
Sent from my iPhone using Tapatalk
Thank you haha - definitely not as impressive as it sounds, it’s just a very thin brush and a tiny layer on the underside where the white text is supposed to be:
The line I drew on the picture above was wrong - a little high, so I peeled it off with my fingernails and tried again:
There’s a little bump because the paint layer wasn’t totally flat, but it came out pretty okay! Red depth next, I think.
Sent from my iPhone using Tapatalk