-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Clean 4130 Daytonas.
- Thread starter XLR8R
- Start date
Bobi01
Respected Member
- 2/2/19
- 3,913
- 3,446
- 113
What about finish of them?
on cf looks like more polished,especially part under that closing part(teeths)
mari115
Respected Member
Yeah the rehaut height (and not the engravings) is such an underestimated tell.
It gives so much to the whole image and geometry of the watch, and in all Daytonas, especially in the 11651X models, by being thin, or short (not sure about the correct term) it makes the dial pop.
See how, when looked at from the side, the further border of the crystal is almost not visible, and the rehaut is quite short. I guess that this effect is given by the combination of rehaut height, correct gasket color and crystal
It gives so much to the whole image and geometry of the watch, and in all Daytonas, especially in the 11651X models, by being thin, or short (not sure about the correct term) it makes the dial pop.
See how, when looked at from the side, the further border of the crystal is almost not visible, and the rehaut is quite short. I guess that this effect is given by the combination of rehaut height, correct gasket color and crystal
Mine too :thumbsup:
Nice, bro. Seems like the whole batch came in at once.
Lexington_120
Somebody's watching you
Yes I think too, its a good thing to take the service , with that we can't have bad surprise normaly
- 17/12/17
- 373
- 249
- 43
Hi mate, I ordered from supporting vendor mrmckhansi/"EU Stock". He gets the watches serviced before shipment to customers.
coincidence? I do not believe.
Inviato dal mio iPhone utilizzando Tapatalk
Trad:
The new V3 version uses 3161 stainless steel case and clasp, which makes it better than [V1 v2]
The version is more cost-effective
2: Perfectly correcting the timing scheme of the movement, using the Dandong timing movement to solve the problem of the past
plate wood
'Timed castration
” slot point, and remove the neutral position, the thickness is measured when the first gear is adjusted.
12.5MM
3: The scale and pointer of the whole watch are deeply polished, the small eye has a solid effect on the central axis, and the timing is pressed
key
head,
The case steel belt is fully polished and chamfered,
super fine
Grinding and drawing technology, using the most praised CLEAN ceramic ring
Inviato dal mio iPhone utilizzando Tapatalk
Some competition for clean now the 4130 is a free for all !
I was told by a private contact that this is not going to be 4130, instead it’s a slimed version of 7750 with sundial function enabled. So don’t get too excited haha. I could be wrong though.
Also notice the fact that they didn’t use the calibre number 4130 in their announcement? It probably is because it’s going to be a 7750.
Yeah the rehaut height (and not the engravings) is such an underestimated tell.
It gives so much to the whole image and geometry of the watch, and in all Daytonas, especially in the 11651X models, by being thin, or short (not sure about the correct term) it makes the dial pop.
See how, when looked at from the side, the further border of the crystal is almost not visible, and the rehaut is quite short. I guess that this effect is given by the combination of rehaut height, correct gasket color and crystal
Fully agree with uou
it is something rep (clean or noob) seems not able to get
this post of mine is not to advertise Arf and it is not an off topic. this news of the release of an ARF V3 with a 12.5 mm case exactly like Clean, with Clean bezel and probably Clean dial and with the addition of a Dandog movement (probably slim 7750 fully functional) denotes the close collaboration between the two factories and the price positioning of the two products, both of which are certainly excellent workmanship. Greetings
Inviato dal mio iPhone utilizzando Tapatalk
- 7/5/21
- 268
- 74
- 28
Right one is older CF dial which had thicker subdials, was sold as a part like CF ceramic bezel.
Left one is the latest dial installed CF Daytona which has correct subdials.
As far as QCs I saw, all of CF Daytona has latest dial.
Does this include black dials?
- 25/3/17
- 4,308
- 3,788
- 113
- 25/3/17
- 4,308
- 3,788
- 113
