Bezel and Dial Review of ZZF V2S 116610LV Submariner and Comparison vs. Gen, ARF V3 and Noob V10

[tjdilla]

for a long time quieter with reader here in the forum.

some Gen Hulk vs ZZF V2s pics

Could you give your thoughts on the ZZF cyclops in comparison to gen?

 

[xxBlack]

for a long time quieter with reader here in the forum.

some Gen Hulk vs ZZF V2s pics

Can we have some sunlight pics with sunburst?


Gesendet von iPhone mit Tapatalk Pro

 

[ziggycharly]

Could you give your thoughts on the ZZF cyclops in comparison to gen?

Decent mag, poor AR

 

[k4jun]

for a long time quieter with reader here in the forum.
some Gen Hulk vs ZZF V2s pics

Great 1st post :thumbup:

Please take a photo of opened safety lock(s)

 

[Danuha]

i will take more detailed pictures in the next days the sun is not shining well today, then I also give my own rating

 

[Bobi01]

i will take more detailed pictures in the next days the sun is not shining well today, then I also give my own rating

Thanks bro that will be very helpfull
if you can try to picture like fix camera on one position on sunlight and put gen and shot it and change to zzfv2s and again shot so they can be on same position
we want much from you but that will be helpfull really bro

 

[trezer]

Hi guys its been a long time i want to buy a hulk and the zzf v2s colors are beautifull but i prefer the 2824-2 movment for reliability , is it possible to swap the sa3135 by a gen eta or not , if not possible is it better to take the v2s or arf v3 2824 which is more reliable but less well finished

 

[Bobi01]

Hi guys its been a long time i want to buy a hulk and the zzf v2s colors are beautifull but i prefer the 2824-2 movment for reliability , is it possible to swap the sa3135 by a gen eta or not , if not possible is it better to take the v2s or arf v3 2824 which is more reliable but less well finished

You can swap with 2824 but we know so far that this clone is very reliable and my advice is to use it and if it die for some reason you can swap it with 2824
also if you read the thread you shouldve know that zzf have vr3135 movement and not sa3135

 

[Saul Goodman]

You can swap with 2824 but we know so far that this clone is very reliable and my advice is to use it and if it die for some reason you can swap it with 2824
also if you read the thread you shouldve know that zzf have vr3135 movement and not sa3135

This would not be a direct swap. You would need a Modder at least. You would need to get eta hands or modify them, Clip the dial feet and have the DW overlayed.
And i guess a movment holder made for eta to fit this case.

 

[badgirlcity]

You can swap with 2824 but we know so far that this clone is very reliable and my advice is to use it and if it die for some reason you can swap it with 2824
also if you read the thread you shouldve know that zzf have vr3135 movement and not sa3135

I asked Li and unfortunately this is not true. 2824/2836 will not fit into a case with a 3135

 

[srhoque]

I asked Li and unfortunately this is not true. 2824/2836 will not fit into a case with a 3135

Read previous post (well explained), it will fit but needs modding. I also second Robi01 opinion, wouldn't worry about putting in a 2824 now, the VR3135 is the best clove now in terms of finish and quality of parts.

 

[Bobi01]

I asked Li and unfortunately this is not true. 2824/2836 will not fit into a case with a 3135

srhoqueSaul Goodman Explained,also if it dies for some reason you can buy new vr3135 movement (isnt expensive)
dont worry people usually dont have problems with it

 

[trezer]

Ok so its a big and difficult modification to do this its better to let the 3135 until its stops working i hope the vr3135 is good, i have already one 2824 and its just perfect
Robi01 how Much for a new vr3135 ?

 

[Bobi01]

Ok so its a big and difficult modification to do this its better to let the 3135 until its stops working i hope the vr3135 is good, i have already one 2824 and its just perfect
Robi01 how Much for a new vr3135 ?

You have many here on forum sale section used and new about 150$

 

[trezer]

Ok so its a big and difficult modification to do this its better to let the 3135 until its stops working i hope the vr3135 is good, i have already one 2824 and its just perfect
Robi01 how Much for a new vr3135 ?

Ok really cheaper than an eta with assembly , do you think the vr3135 need a cleaning out of the box or as it's a reliable movement this was done correctly at the factory

 

[trezer]

Ok so its a big and difficult modification to do this its better to let the 3135 until its stops working i hope the vr3135 is good, i have already one 2824 and its just perfect
Robi01 how Much for a new vr3135 ?

Ok really cheaper than an eta with assembly , do you think the vr3135 need a cleaning out of the box or as it's a reliable movement this was done correctly at the factory ?

 

[Mr Heuristics]

Ok really cheaper than an eta with assembly , do you think the vr3135 need a cleaning out of the box or as it's a reliable movement this was done correctly at the factory

It's a crap shoot. QC in a factory manufacturing contraband goods for illegal international distribution is not going to be consistent. It is what it is. See what you get and work from there... step by step. Can't plan too far ahead in illegal markets. That's part of the thrill of this game.

 

[Kingquest_s]

First I would to thank JJtime Li about the watch. The best version out of the box. Here is my honestly review:

*Crown Guard* - I understand some OCD about he crown guard but i bet non RWI or even some RWI member can point that out from naked eye if you had gen on the side and closet picture that you can zoom 1000x. Nothing is perfection, unless you believe it. Actually it does not bother me at all. Really! Yes!!.

*Bezel and Insert* - The color is brighter than gen, green gray on ZZF v2s and green and Platinum Brown on Gen. For eye sight, everybody has different look, i just tell what i did see. The engraving number and color match gen perfect. (U can see one picture when i flashed the dial to caught the number engraved and color).

*Dial* - i would change to new dial or even the gen dial in future if i can find it. The "ROLEX" font accutally not accurate. "O" and "X" is completely wrong. The font little bit bold compare to gen. U can see one member side by side gen and zzf2 on the comment above.

*Hand* - definitely WTB ARF hand for sure.

*Date Wheel* - Little bold than gen and optional for gen in future mod.

*Crystal and cyclop* - It looks ok to me. The cyclop still little glare to me. Prof crystal or gen for future mod.

*Bracelet and clasp* - little stiff and sharp, feel like BP. Consider ARF too. Hope i can find. I heard it hard to get ARF part now.

Overall, this is the best of the box right now. For everyone who does not need mod and ready togo. The finish is very close to gen.

Thank you so much guys. Have a great day and be safe with COVID-19. I did attach all the picture below. Will update high-res picture soon.

Sent from my SM-N950U using Tapatalk

 

[Mr Heuristics]

First I would to thank JJtime Li about the watch. The best version out of the box. Here is my honest review:

Thank you for taking the time to weigh in.

 

[xxBlack]

Gesendet von iPhone mit Tapatalk Pro