- 23/8/07
- 6,475
- 8,453
- 113
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
ARF 16610 LV Submariner 904L Kermit photo review
- Thread starter m5smg2
- Start date
masterpiece777
Renowned Member
masterpiece777
Renowned Member
- 23/8/07
- 6,475
- 8,453
- 113
masterpiece777
Renowned Member
M5smg2 thanks for your help and great pictures!
I going to order one today!
anyone know the gen part numbers for the following 16610 parts:
tube
crown
xtal
I going to order one today!
anyone know the gen part numbers for the following 16610 parts:
tube
crown
xtal
Last edited:
- 23/8/07
- 6,475
- 8,453
- 113
- 23/8/07
- 6,475
- 8,453
- 113
The color difference between grey 316 and white 904 draws me in every time.
- 7/7/19
- 883
- 593
- 93
The color difference between grey 316 and white 904 draws me in every time.
night and day
- 17/4/17
- 865
- 741
- 93
Some will still disagree and say that there is no difference between the two metals. The one who say that are either lacking the basic observational skills or just don't know what they are talking about.
904l and 316l steel, when compared side by side, are easily distinguishable.
Sent from my SM-G973U using Tapatalk
Chinese stainless varies in colour no matter what grade it is. Half of it is rubbish, let’s see if we can get a pic of genuine Rolex 316L and 904L together... it might be a better indicator to actual colour differences. Ill check tonight between mine and post a pic
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Better yet here’s a pic of high quality 904L and 316L from the same supplier( not Chinese ) 904L on the right and 316L on the left the area has been buffed with the same wheel at the same time. Almost indistinguishable under the led lighting.
now here’s a pic of something really different.. this is a very high grade Custom alloy stainless. The small shaft is 316L and the machined end piece is one piece but almost completely different colour at different angles. This is a good example of how light at the smallest angles depicts a difference in materials with the same surface finish
now here’s a pic of something really different.. this is a very high grade Custom alloy stainless. The small shaft is 316L and the machined end piece is one piece but almost completely different colour at different angles. This is a good example of how light at the smallest angles depicts a difference in materials with the same surface finish
Tobel
Respected Member
- 6/7/17
- 5,461
- 3,676
- 113
Do you think that you could simply respectfully disagree instead of calling people who think differently from you ignorant or blind?
Still have the JF bud...for now..
If you plan to sell let me know
- 23/8/07
- 6,475
- 8,453
- 113
To each their own, of course. 904L is just whiter in color. You can even see it in the rehaut - it’s brighter. And not just because I have both metals on hand (same factory, same brushing) but because I see how 904L comes alive in the sun in a way 316 can’t.
masterpiece777
Renowned Member
To each their own, of course. 904L is just whiter in color. You can even see it in the rehaut - it’s brighter. And not just because I have both metals on hand (same factory, same brushing) but because I see how 904L comes alive in the sun in a way 316 can’t.
Fully agree!
Sent from the RWI App
- 17/4/17
- 865
- 741
- 93
DittoTo each their own, of course. 904L is just whiter in color. You can even see it in the rehaut - it’s brighter. And not just because I have both metals on hand (same factory, same brushing) but because I see how 904L comes alive in the sun in a way 316 can’t.
Sent from my SM-G973U using Tapatalk