Hi, I usually research alot before asking a question but for this model the information seems a bit outdated. Is there any TD or website (except a rolex retailer cause I know your jokes) that still sells a 14060 replica? I'm more interested on the pre-ceramic sub and really want the no date. I don't really mind that they use the same case size as 16610 which is not the same as gen. Thanks alot for your help in advance!
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
14060 or 14060M?
- Thread starter JustFou
- Start date
- 12/3/18
- 34,664
- 66,757
- 113
Nembo sells them sometimes. He is the Admin for RepGeek. You will need to register to see his sales threads I think. He does not (usually) takes orders, especially from first time customers. Rather he lists a few watches at a time and you grab it if you want it and see it first. MAKE SURE you read up on his rules for purchasing as he has little tolerance for violating them. I leave a tab open on his page and hawk it pretty regularly. You never know what special goodie might pop up. I want one of the 14060's also - I could have had this one but I had just bought two other watches and had to let it pass. This is the second of these I've seen from him in about 6 months. BP makes decent reps and for this price the watch is a no brainer. It's a 14060, not a 14060M so it has two correctable significant flaws, other flaws are minor enough IMO. The 14060 never had rehaut engraving, and the lugs should be drilled. IDK why other TD's don't offer this watch, obviously BP makes them and all TD's sell BP watches. But I've never seen it on any other TD sites and I am as familiar with all of them as anyone.
https://www.repgeek.com/nembos-corn...d-fs-bp-factory-rolex-14060-date-vintage.html
- 21/4/19
- 435
- 379
- 63
I would contact a TD of your choice to see if they can source this model for you. At least Silix (https://forum.replica-watch.info/forum/silix) still lists a 14060 on their website (http://silix-prime.es/index.php?main_page=product_info&cPath=115_158_226&products_id=2520), so I am assuming other TDs may also be able to source the same or similar version. However, I would make sure you do your research (which it seems you have, since you recognize that all of the 14060 reps seem to use larger 16610 based cases).
From this old thread (https://forum.replica-watch.info/forum/rolex-tudor-replicas/87698-14060-from-silix - pic links in the thread are dead), it seems that the 14060 that silix has sourced in the past has come with drilled lugs, despite the fact that they are not shown in the pictures on their website.
Good luck with your search.
From this old thread (https://forum.replica-watch.info/forum/rolex-tudor-replicas/87698-14060-from-silix - pic links in the thread are dead), it seems that the 14060 that silix has sourced in the past has come with drilled lugs, despite the fact that they are not shown in the pictures on their website.
Good luck with your search.
- 12/3/18
- 34,664
- 66,757
- 113
Nice one bro - that sample has no rehaut engraving either. Drilled lugs would be too much! I'm going to email Michelle right now and ask her about it. Last time I tried to get a TT 16710 from her she responded it was out of stock though. She doesn't update the site.
- 12/3/18
- 34,664
- 66,757
- 113
- 12/3/18
- 34,664
- 66,757
- 113
She has another one listed in the Economy watches section - 2813, I asked about both. $82, site says she has 9 woohoo!
http://silix-prime.es/index.php?main...oducts_id=2034
http://silix-prime.es/index.php?main...oducts_id=2034
Last edited:
Thanks for the reply KJ. Will definitely look it up! Btw this usea 23J movement. That's a low beat movement right?
Thank you for this, I was trying to find on silix's website but couldn't find it! This model seems promising, as I don't care much about the case size.
- 27/7/15
- 1,970
- 1,072
- 113
- 12/3/18
- 34,664
- 66,757
- 113
From Michelle
Hi friend,
Wish you are fine.
ROL116 and ROLS218 are available, but sorry they don't have drilled lug holes for now, but they have engravings.
Could you please tell me which one would you like to buy best?
We look forward to your early reply.
Best regards
Michelle
Yup. I went for the economy version. Might do a Miyota swap or something later on.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- 27/7/15
- 1,970
- 1,072
- 113
The case might not be important to him in a scenario were he buys a rep that uses a 16610 case and a rep 14060 dial. But a gen 14060 dial will not fit a 16610 case, the dial is too small. The 5 digit date sub and no date subs use different sized cases, unlike the 6 digit which share the same case