get the noob and get an ARF or BP or gen dial and you are all set....here is a dial I will put in my 116500
Sent from iX
Looks good...this is ARF or BP?
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Noob Daytona vs ARF Daytona
- Thread starter guru
- Start date
Looks good...this is ARF or BP?
knol
Active Member
- 17/8/16
- 275
- 29
- 28
get the noob and get an ARF or BP or gen dial and you are all set....here is a dial I will put in my 116500
Sent from iX
would the arf dial fit the noob movement ?
Also i have not seen any reports about a BP dial, is it good ?
- 30/12/15
- 189
- 110
- 0
It's 48$ plus shipping, plus the work of a good watchmaker obviously since i'm not able to do it on my own
It's 48$ plus shipping, plus the work of a good watchmaker obviously since i'm not able to do it on my own
Yes me too unfortunately, but hey, I'm slowly learning, that's what's great about this hobby, you get to try stuff out.
I've read in another noob Daytona thread that it would fit if the dial feet are clipped. But I'll let someone who's actually performed the swap confirm it...
knol
Active Member
- 17/8/16
- 275
- 29
- 28
It's 48$ plus shipping, plus the work of a good watchmaker obviously since i'm not able to do it on my own
which TD?
- 30/12/15
- 189
- 110
- 0
blehbleh215
Active Member
- 2/2/17
- 200
- 47
- 0
ARF is certainly a bargain...But the low power reserve is an issue. I take it off at 6pm after work, when I pick it the next morning, I have to adjust the time again...
- 30/9/06
- 11,653
- 1,258
- 113
- 30/9/06
- 11,653
- 1,258
- 113
I lay down my noob daytona on Friday evening and put it on on Monday morning and it is just 2 sec slower
Sent from iX
knol
Active Member
- 17/8/16
- 275
- 29
- 28
is that because of the different movement ? Would pushers from BP or another factory fit for example ?
knol
Active Member
- 17/8/16
- 275
- 29
- 28
rolexwatchfan
Put Some Respect On My Name
- 17/8/13
- 4,224
- 799
- 0
Nope. Different angle and movement. I'd try gen YG pushers on one of my Noob builds so I'll keep you posted. If successful, SS pushers will fit as well.
My ARf runs for 48 hours. That's properly winding it.
Try that and see if it's better.
Or else change the rotor as the stock is light and nkisy, whilst you are at it remove that silly deco plate too.
Sent from my SM-G950F using Tapatalk
Try that and see if it's better.
Or else change the rotor as the stock is light and nkisy, whilst you are at it remove that silly deco plate too.
Sent from my SM-G950F using Tapatalk
I am going to throw a spanner in the works and say that although there is a firm following of the ARF Daytona 4130 and those of the Noob Daytona 4130 I believe that Noob will win hands down on working chrono's. Other issues are just so minor that the average guy will never know and only the purists here battle it out for supremacy.
blehbleh215
Active Member
- 2/2/17
- 200
- 47
- 0