• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Review AP RubberClad Bezel Differences into Detail - Noob vs J12

S

slaughterer62

Mythical Poster
DO NOT TRADE WITH ME
27/1/13
9,280
1,890
113
Just a caveat: the Mikey 1XAR crystal is 32.5mm and will not fit in the JF RC bezel, although a guru 32mm 2XAR crystal will.
 
G

Garuda

I'm Pretty Popular
15/12/12
1,712
528
0
jpohl402 said:
Is this where you got your username, just wondering?
(From discussion about Pride of Indonesia's caseback - the bird/eagle):
But the real connection to Indonesia comes in two forms. Firstly, the watch features a large gold medallion with a finely engraved Garuda on the back. Garuda is a mythological creature in Hindu lore that is half-bird and half-human, and is supposedly the ride of the god Wisnu. Garuda is typically perceived as the manifestation of Wisnu in Hindu religion.
Click to expand...
Garuda was the character from street fighter ex psx.
 
Z

zocker4711

Banned member, the goat does not approve
Banned
18/3/13
2,912
22
0
On my Rubber Clad Franken with the JF Bezel is the Mikey2008 Crystal installed... It´s not sooooo easy to do as the other ones but it Works as you see... ;)

I had today a few GEN APs in my Hand again... And i have double check them, they are all only a little little bit over the Bezel...

I will get in the next Days an GEN Rubber Clad Bezel (New) then i will Post the Pics with an GEN Crystal on it... Then you Guys will see that the Crystal doesn´t sit sooooo High...
 
guru

guru

Advisor
Advisor
30/9/06
11,647
1,242
113
lol, I,also have a gen crystal and a gen bezel and all the other parts, looking forward to see it. The gen crystal is .4 mm above the bezel....
But as always, Valente posted that some divers have sunken screws and some don't...So at the end it doesn't really matter, you must like it it and for me I like it more when it is about .4 mm rised.


sent from my iPad Air
 
guru

guru

Advisor
Advisor
30/9/06
11,647
1,242
113
lol, I,also have a gen crystal and a gen bezel and all the other parts, looking forward to see it. The gen crystal is .4 mm above the bezel....
But as always, Valente posted that some divers have sunken screws and some don't...So at the end it doesn't really matter, you must like it it and for me I like it more when it is about .4 mm rised.


sent from my iPad Air
 
C

chris3007

Mythical Poster
24/8/13
9,407
109
0
Some gen's
6641d364ff98821e42df9acabb0bf4cd.jpg

beb78e80e2e5e8a097d67dfed24d0418.jpg

e23bf66097a7672fdb020c9a99d7f7b3.jpg



Sent from my iPad Air 2
 
Z

zocker4711

Banned member, the goat does not approve
Banned
18/3/13
2,912
22
0
Dunno all the GENs i had today in my Hand had the Crystal Same Hight as mine... I mean these Pics are also not sooooo high as these Pic/Video from Tini

But everyone must live Self with the flaws or not ;)

So far the owner is Lucky, all is good :)
 
Z

zocker4711

Banned member, the goat does not approve
Banned
18/3/13
2,912
22
0
I have build out now my Crystal so I have no probs with the AR :D and I have an wonderful clear view of the Dial...
The Screws I have progrogative set every Screw on another direction :)))

So I have the Ultimate customer AP

Next step I think will be to Remove the Hands that I have no probs with the Sweep :rofl:
 
W

watch-geek

Active Member
24/5/15
207
0
16
Nice work on the mods! Did you replace the crown with the gen like dial? I noticed the date window is now gen like.
 
guru

guru

Advisor
Advisor
30/9/06
11,647
1,242
113
[emoji30][emoji57]


sent from my iPad Air
 
N

Norrie

I'm Pretty Popular
Certified
24/5/12
2,062
63
48
The info is no doubt in here but I couldn't find it. Will a j12 bezel go on a noob case easy enough? Would I file down the screws or replace with j12? And I'll pop in a 2x j12 ar crystal.
 
You must log in or register to reply here.
Top Bottom