{*PCTeam*} Probably the best pam rep ever- Kuvarsit PAM Boutiques

[Sora]

sorry wrong post, thought it was 360.

 

[Spboudart]

i have it going for $248, the latest KW version.

Link to a sale thread in your section or just pm?

 

[Spboudart]

MOVEMENT:
- Curiously it is seemingly a Noob movement.

Not really surprising though as Kuwarsit was the first one to have those movement a couple of months before the first Pam from Noob fact.

 

[s3g0y]

On what forum Kuvarsit is a TD? I can't find him on RWG nor RG.

 

[Klockis]

I must say that this looks quite good.
Some real nice attention to details.
Just look at the deep engraving on the caseback

And just like spboudart says, the high beat platinum plated 6497-2 was first offered by Kuvarsit in their 360 and then as a spare movement a year or two ago.

 

[Klockis]

Just to compare, here is my H-fac 418 dial and CB in a Noob V3 case-set:

 

[Spboudart]

On what forum Kuvarsit is a TD? I can't find him on RWG nor RG.

Because you're not looking at the good RWG, you're looking at the TLKC, while it's the other RWG, the real one you must look for.

 

[Rwolf]

My experience: normally KV middle cases are thinner than Noobs and gens...

NOTE: for EU buyers KV can ship from Turkey or Greece

 

[ALE7575]

Not really surprising though as Kuwarsit was the first one to have those movement a couple of months before the first Pam from Noob fact.

And just like spboudart says, the high beat platinum plated 6497-2 was first offered by Kuvarsit in their 360 and then as a spare movement a year or two ago.

Yes, you are right.
I remember this matter now. From when I studied some old samples from Kuvarsit.

Therefore two makers have the same movement. Good point

ALE

 

[Beone21]

Dang, i will buy this one for sure.
When is this coming?

 

[ALE7575]

On what forum Kuvarsit is a TD? I can't find him on RWG nor RG.

As said by Spboudart, just try the correct RWG:
http://www.rwg.bz/board/index.php?showtopic=60

ALE

 

[ALE7575]

Just to compare, here is my H-fac 418 dial and CB in a Noob V3 case-set:

Thanks Klockis for the pics
It reallly seems that KW caseback engraving is better than H maker one. Isn't it?
ALE

 

[ALE7575]

My experience: normally KV middle cases are thinner than Noobs and gens...

NOTE: for EU buyers KV can ship from Turkey or Greece

Rwolf, you are right regarding "old" Kuvarsit cases.

But at this moment, following the information from Kuvarsit owner through a personal PM, this case is a completely new development from KW with a lot of time and money spent on it and trying to get the best like to gen case and crystal in replica market.

Threfore we must consider it is a new project with a more ambitious target.

ALE

 

[Spboudart]

Therefore two makers have the same movement. Good point

The movement might be made in a different factory, and both Noob factory and KW use the same supplier.

 

[slaughterer62]

"Best ever, 1:1, Swiss AAA+++, genuine parts maker, blah-blah-blah..."
Really...
How about to wipe dirt off from CG screw first?

+1

:facepalm:

 

[trailboss99]

My god the fit and finish on that are simply amazing! Best finished case set I have ever seen in a rep. Look at the brushing on the CG, perfect!

Dang, i will buy this one for sure.
When is this coming?

It's out now mate: http://www.rwg.bz/board/index.php?showtopic=47503

 

[ALE7575]

The movement might be made in a different factory, and both Noob factory and KW use the same supplier.

Thanks for the explanation

This is exactly what I mean

ALE

 

[ALE7575]

My god the fit and finish on that are simply amazing! Best finished case set I have ever seen in a rep. Look at the brushing on the CG, perfect!

OK Col

This was exactly my first tought when I saw the pics of this replica

I hope all the rest is in the same level

I will wait for the samples to get a exact judge.

ALE

 

[Rwolf]

Rwolf, you are right regarding "old" Kuvarsit cases.

But at this moment, following the information from Kuvarsit owner through a personal PM, this case is a completely new development from KW with a lot of time and money spent on it and trying to get the best like to gen case and crystal in replica market.

Threfore we must consider it is a new project with a more ambitious target.

ALE

We need a cavy to test it! I'm curious about the caseset engineering

CG

 

[Fiddo]

Is this the same watch being offered by Hont?--------> http://forum.replica-watch.info/vb/showthread.php/kv-pam417-pam411-138211