• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

ZFac & KW-V6Fac PAM 569 are coming!! - [QC pics allowed]

C

chris3007

Mythical Poster
24/8/13
9,407
109
0
The noisy rotor at a PAM is not because of the 7750 movement. The noise is because of the P.9000 deco plates at the movement. The rotor must sit very high over the bearing and that fact makes the rotor wobbly and noisy. The Asian rotor bearing is not the best and not made for this extra stress.

Normal rotor at a 7750 movement
e923e30c5445e0e30d4d6e1127ae6433.jpg


PAM rep rotor at a 7750 movement
0ddb683affcd2a8bbdd80b37a9818b9e.jpg



Sent from my iPhone 6
 
C

carboncopy

Active Member
4/12/14
241
1
0
ALE7575 said:
OF COURSE, this noisy rotor is a specific problem of your watch
Usually A7750 rotors are more noisy than Seagull. But decoration of movements produces additional issues like that
Try to get the help of a watchsmith before nothing, maybe some oiling or a little adjustment is enough
Anyway that is a very "small" problem for a rep. Try to understand it.

ALE
Click to expand...

Its nice to know that the Seagull movement is not inherently noisy. At least I don't have to pay for a more expensive movement to avoid that. As said, I already accepted the fact that some reps can be duds... just the luck of the draw and for a buyer like me, its quite a pity as the local watch smiths won't touch a rep :(
I'm now down 3 reps that needs attention, sigh

Not complaining but stating my predicament... anyway, apologies to the OT for hijacking this thread
 
C

carboncopy

Active Member
4/12/14
241
1
0
chris3007 said:
The noisy rotor at a PAM is not because of the 7750 movement. The noise is because of the P.9000 deco plates at the movement. The rotor must sit very high over the bearing and that fact makes the rotor wobbly and noisy. The Asian rotor bearing is not the best and not made for this extra stress.

Thanks Chris for the rotor shots... its a huge gap between the Gen and Reps. Although its a different movement, I can see why it wobbles... at least the watch seem to have a fair power reserve as it goes on for more then 30 hours when I wore it last :) Cheers!
Click to expand...
 
N

nicktan182

I'm Pretty Popular
31/10/13
1,130
11
38
Received a seagull 569 and seagull 389 today, the 389 is super quiet but 569 is pretty loud. luck of the draw I guess.
 
S

supersixevo

You're Saying I Can Sell?
30/8/14
32
0
0
Could some explaing what is the CP? I just placed an order and want to make sure I know what to look for when QC pics are sent..
thanks
 
T

taku

You're Saying I Can Sell?
27/2/15
47
4
8
supersixevo said:
Could some explaing what is the CP? I just placed an order and want to make sure I know what to look for when QC pics are sent..
thanks
Click to expand...

CP mean Cannon Pinion. U have to make sure that the CP is recessed/flush...

 
K

kilowattore

Sales Moderator / Section Moderator
Staff member
Moderator Sales
Section Moderator
Certified
11/5/13
13,633
5,834
113
Italy
It's the pin that holds the hands attached to the movement, at the center of the dial.
 
P

peterpl

Put Some Respect On My Name
24/7/11
4,671
638
113
^ Anyone with 6.5inch wrist rocking this bad boy?

Pics?
 
P

peterpl

Put Some Respect On My Name
24/7/11
4,671
638
113
How do you find it mate? Large? does it sit well on the wrist?

I'm used to 44mm PAMs just not sure on 47mm
 
M

mysterio

Mythical Poster
Advisor
19/8/08
9,794
863
0
peterpl said:
How do you find it mate? Large? does it sit well on the wrist?

I'm used to 44mm PAMs just not sure on 47mm
Click to expand...

I have a smaller wrist at 6.25" and while it is big, it's not that much bigger if you've worn a 44mm sub like the PAM243. Being made of titanium helps too. :)
 
You must log in or register to reply here.
Top Bottom