Yuki and Genuine Rolex Datewheel

[efthimis]

Question and help out please, I have a Yuki movement with my modder and he says that it is very difficult to install a gen Rolex DW in it, what should I do? I wanted gen DW for my Rolex to go with the gen crystal...


Sent from my iPhone using Tapatalk Pro

 

[lukko]

Question and help out please, I have a Yuki movement with my modder and he says that it is very difficult to install a gen Rolex DW in it, what should I do? I wanted gen DW for my Rolex to go with the gen crystal...


Sent from my iPhone using Tapatalk Pro

Mhmhmh

That's a bit strange because you should easily swap the gen DW because it's "gen spec" movement. Many others modders have done this in the past without any problem

 

[efthimis]

Sent from my iPhone using Tapatalk Pro

 

[efthimis]

Any problem above??


Sent from my iPhone using Tapatalk Pro

 

[Nivka]

I've definitely seen that other people have done it. @tickledshoes would know

 

[efthimis]

It seems that some movements had this issue, Domi also had the same issue a couple of times, yes @Tickleshoes should help


Sent from my iPhone using Tapatalk Pro

 

[Tickleshoes]

It seems that some movements had this issue, Domi also had the same issue a couple of times, yes @Tickleshoes should help

I've not had any trouble with gen date discs. @misiekped , @occb2 ?

 

[watchservicesny]

From time to time I had same issue as the yuki date seating is done poorly and gen disc is tight and doesn't click freely , i have so many of those date seating and replace them if need it
Last step is trimming the disc a bit


Sent from my iPhone using Tapatalk

 

[Tickleshoes]

From time to time I had same issue as the yuki date seating is done poorly and gen disc is tight and doesn't click freely , i have so many of those date seating and replace them if need it
Last step is trimming the disc a bit


Sent from my iPhone using Tapatalk

Any idea what about the seating is poor? The size? I'm wondering if removing the jewel on the side of the date disc would help?

 

[occb2]

A Yuki will take a real Rolex date wheel with out issues. There was an issue where It would jump an extra date due to the way the Yuki date advance was but it was handled from what I understand. As far as fit. Perfectly.

 

[occb2]

Sorry. Didn't see Mikes response. I never had an issue with a real date wheel besides the date flip issue.

 

[efthimis]

Thank you all for your input! So the jewel is standing in the way and the solution is to either take it off or trim the disc a bit?


Sent from my iPhone using Tapatalk Pro

 

[efthimis]

@Johnny Depp


Sent from my iPhone using Tapatalk Pro

 

[Tickleshoes]

Thank you all for your input! So the jewel is standing in the way and the solution is to either take it off or trim the disc a bit?


Sent from my iPhone using Tapatalk Pro

I guess it depends on what exactly is the issue. I've never had a disc that didn't "fit" only ones that didn't snap crisply. It gave me trouble for my months but as promised I spent a lot of time today troubleshooting and finally solved it!

There are three tabs that hold the disc down. Under 2 of them are jewels. It seems that some date seats have these tabs pressed in too far. The jewels are supposed to spin! I was able to take my staking set and loosen them and bit and the date discs work perfectly.

If that is the issue your watchsmith might try that.

 

[JohnnyBe]

@efthimis hoping for the best my friend..if there is no solution for you just buy a gen 3135

 

[efthimis]

@Tickleshoes thank you very much, I will let him know [emoji1303][emoji1303][emoji1303]


Sent from my iPhone using Tapatalk Pro

 

[Johnny Depp]

I guess it depends on what exactly is the issue. I've never had a disc that didn't "fit" only ones that didn't snap crisply. It gave me trouble for my months but as promised I spent a lot of time today troubleshooting and finally solved it!

There are three tabs that hold the disc down. Under 2 of them are jewels. It seems that some date seats have these tabs pressed in too far. The jewels are supposed to spin! I was able to take my staking set and loosen them and bit and the date discs work perfectly.

If that is the issue your watchsmith might try that.

Hello guys! I want to try to change the dish with a sa3135, because it does not have the problem with it! I try tomorrow as I finish my work.