i pulled the trigger on ny second bp submariner c this one is the lm this time.got qc pics all looked good but received a few days ago and noticed the 30 on the insert is not fully painted i want to get matching paint to tidy it up .so any idea what paint colour matches.im not intrested in the plat mod just need fill in the 30
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
white paint to touch up the ceramic insert
- Thread starter live1
- Start date
- 30/3/08
- 43,756
- 18,565
- 113
any brand of flat white i should look at.im only painting the 3 and the 0 the rest look good .im getting the next noob lv submariner c when released so im only touching up that.also the lec was a mm off so used a ball off tape to twist the crystal,the alignment is spot on now.
Wow I didn't know you could move the crystal that way.modelers paint should do it.if the colours not quite right you could do the whole bezel to match.I've done this with the plat mod and it's not to difficult if careful
Get a really fine brush as well .if you follow the pilworx tutorial you'll be fine.good luck
do you have a link to his tutorial.when i search i get something different.im not going to use taymia paint,im going to get white matt enamel model paint
Go to the search function and put pilworx in it's about half way down the page.not sure how to put the link up
found it.would i need off white matt enamel.or just white mat enamel paint for bp submariner insert ? To match existing numbers