• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

What version of the 42mm PO to use for a Franken project?

Q5?

Legendary Member
Advisor
29/3/09
15,273
7
0
We need to find the 2500D date disc......

SAM_1554.jpg
 

drbollocko

I'm Pretty Popular
12/11/10
1,171
22
38
I would say 5th gen aswell, even though the 4th gen has many strong points. As mentioned above the lug shoulders are noticeably thicker, and while it is subtle and would not be noticed on the wrist, it is one of those things that when you've seen it next to gen, you can't get it out of your head (my god the ocd of us rep fans!) :D

Still very good either way though, also it must be said even the 5th case has slight difference in shoulder cut to the gen, it is slightly thinner, so goes the opposite way to 4th gen in that regard. Less noticeable though and really looks close.

Tbh, best not to look too closely, this stuff could drive anyone into the institution for deranged rep fans if we did :)
 

Inushuk

Put Some Respect On My Name
19/10/10
5,500
5
0
Holy crap!
How much dosh are we talking there?

Watch : 200 Euros

Omega 062SB3063- Sapphire Glass - 144,29 Euros
Omega OME-2500-Dial#3 (064WK3170001) - Black Dial - 203,47 Euros
Omega HAN-4221 (065WZ4312) - Steel With Luminous Infill Hour & Minute Hand - 25,94 Euros
Omega HAN-4222 (066WZ4313) - Steel With Red Tip and Luminous Infill Centre Seconds Hand - 12,77 Euros
Omega 082SU1703 - Planet Ocean Black Bezel Insert - 171,93 Euros
Omega 069ST42184 - Crown 9 x Ø6.10, Depth 4.50 Stainless Steel Waterproof - 13,93 Euros
Omega 090ST1232-Case Tube - 3,21 Euros
Glass Gasket (X22746) x 1 - 5,36 Euros
ETA date wheel - white on black 3h - 2557/1 for 2802 - 31,89 Euros
Omega 112ST1703 - Gen case back - Offrei - 112,41 Euros
Helium Valve 086ST0115 - 68,30 Euros
Gen Rubber band - 60 Euros
Full Modding by a Specialist (Uwe) - 130 Euros

TOTAL GEN PARTS AND MODS : 983,50 EUROS + 200 EUROS for the Watch

So an Ultra franken for less than 1500 euros ...

and do not start the usual thread : "why go franken vs used one" it has been already discuss ... :) ;) ;)

And all those prices are from last year when I ve done my franken
All prices have raised by few % ...

ultimate Franken
http://forum.replica-watch.info/vb/showthread.php/my-upo-franken-70348
 

Ed911

Put Some Respect On My Name
8/12/11
5,462
56
48
EU
Watch : 200 Euros

Omega 062SB3063- Sapphire Glass - 144,29 Euros
Omega OME-2500-Dial#3 (064WK3170001) - Black Dial - 203,47 Euros
Omega HAN-4221 (065WZ4312) - Steel With Luminous Infill Hour & Minute Hand - 25,94 Euros
Omega HAN-4222 (066WZ4313) - Steel With Red Tip and Luminous Infill Centre Seconds Hand - 12,77 Euros
Omega 082SU1703 - Planet Ocean Black Bezel Insert - 171,93 Euros
Omega 069ST42184 - Crown 9 x Ø6.10, Depth 4.50 Stainless Steel Waterproof - 13,93 Euros
Omega 090ST1232-Case Tube - 3,21 Euros
Glass Gasket (X22746) x 1 - 5,36 Euros
ETA date wheel - white on black 3h - 2557/1 for 2802 - 31,89 Euros
Omega 112ST1703 - Gen case back - Offrei - 112,41 Euros
Helium Valve 086ST0115 - 68,30 Euros
Gen Rubber band - 60 Euros
Full Modding by a Specialist (Uwe) - 130 Euros

TOTAL GEN PARTS AND MODS : 983,50 EUROS + 200 EUROS for the Watch

So an Ultra franken for less than 1500 euros ...

and do not start the usual thread : "why go franken vs used one" it has been already discuss ... :) ;) ;)

And all those prices are from last year when I ve done my franken
All prices have raised by few % ...

ultimate Franken
http://forum.replica-watch.info/vb/showthread.php/my-upo-franken-70348

Pics, Inushuk, pics please!!!
 

ottomatic

Renowned Member
Supporter
12/2/12
580
20
18
Can a gen dial, hands, and ETA 2824 be installed in a PO that came with a 4813? Mine just died on me.
 

KBH

Mythical Poster
1/11/07
7,168
41
48
Can a gen dial, hands, and ETA 2824 be installed in a PO that came with a 4813? Mine just died on me.

No reason why not that I know of. I've swapped back and forth between 21j and ETA many times.