VSF Omega 8800 Super Clone Movement

[puretime]

VSF All-New Seamaster 300M — V4 Version with Upgraded Omega 8800 Integrated Movement!

Movement Features:
① The VS integrated movement adjusts the calendar in the same way as the original, rotating the crown counterclockwise.

② The VS 8800 integrated movement has a power reserve of 54 hours (original: 55 hours)

③ All jewels, gears, screws, and other small components serve real functions, unlike the 2824 with fake plates glued with jewels and gears, which only resemble the original in appearance but are prone to detachment, causing movement failures.

Movement Appearance:
① The VS 8800 movement matches the original in diameter (26.5mm) and thickness (approx. 4.65mm). The 2824 plate movement has a diameter of 25.9mm (0.6mm smaller than the original) and a thickness of 6.4mm (1.75mm thicker than the original).

② The shape near the balance wheel, the grooves around the main plate, and the milling pattern on the plate match the texture of the authentic movement.

 

[Got20Mate]

Yo this looks superb, when's it hitting the market for purchase?

 

[mclarendude]

Yo this looks superb, when's it hitting the market for purchase?

You don't need this.

 

[Got20Mate]

You don't need this.

Let's be honest, I don't need any of the reps or watches that I buy but that's never stopped me before. Perhaps you're right though, the majority of the reps that I frequent are my frankens and they don't have fancy movements in them. Just reliable workhorses they are inexpensive

 

[mclarendude]

do it anyway

 

[manuninja]

very interesting! the VSF seamaster is a model that i would like to get sooner or later. For now i have discarded it because of the crown problem. With this new movement could the problem be solved?

 

[Got20Mate]

very interesting! the VSF seamaster is a model that i would like to get sooner or later. For now i have discarded it because of the crown problem. With this new movement could the problem be solved?

Havent had the crown problem on my last two vsf but that's just me.

 

[ShiroTenshi]

wonder if they actually made it 25200bph.

 

[6239]

Are the updating the crown guards ?

 

[Reaps]

wonder if they actually made it 25200bph.

QC I've seen says hell 4hz 28,800 on timegrapher, so it isn't.

 

[chrisat]

wonder if they actually made it 25200bph.

It's anyways not a co-axial movement, so who cares. Nobody is going to see the difference between a 3.5 and a 4Hz movement of the seconds hand.

 

[Kerbus]

I’m hoping this version will come available with the blue dial. If it does, I’ll eventually replace my existing one with ones when it dies. Looks right now only black?

 

[ShiroTenshi]

It's anyways not a co-axial movement, so who cares. Nobody is going to see the difference between a 3.5 and a 4Hz movement of the seconds hand.

well if you are going to make a clone movement you might as well right?

 

[chrisat]

well if you are going to make a clone movement you might as well right?

If it was a proper clone movement, it would need to be a co-axial movement in the first place - but it isn't. Omega runs the movement at 3.5Hz to compensate for the technical limitations that the co-axial brings with it (it's basically a compromise of accuracy and power reserve).