• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

VSF 126610 Submariner with VS3235 Latest Movement 72 Hours Power Reserve

rcom440

Respected Member
10/11/12
5,840
3,620
113
USA
F9543-C41-BDBD-4-D74-8-D34-6-FE76942770-E.jpg
 
  • Like
Reactions: Pizzo and Glidelock

stufuse

Respected Member
22/10/17
3,659
2,454
113
UK
What are you saying curves? Are you just talking about the curve of the lugs as they get closer to the tip?

Sent from my SM-G960U using Tapatalk

The inside edges of the lug are at an angle, if you were to measure across the lug where the SEL sits, it’ll be narrower near the case/bezel and wider at the tip. If that makes sense?


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: recan1ze

WatchSmith.US

-- Watchmaker --
Vendor (Watch Repair)
Certified
13/3/16
1,289
2,007
113
The inside edges of the lug are at an angle, if you were to measure across the lug where the SEL sits, it’ll be narrower near the case/bezel and wider at the tip. If that makes sense?


Sent from my iPhone using Tapatalk

The bracelet is off of mine and I measured the inside edges of the lugs and am not seeing the taper you're referring to. Everything is 20.9mm no matter where I measure. Maybe I'm misunderstanding.
 

YellowFin

Not pretty, hardly popular
28/1/20
2,527
2,809
113
Molvania
The bracelet is off of mine and I measured the inside edges of the lugs and am not seeing the taper you're referring to. Everything is 20.9mm no matter where I measure. Maybe I'm misunderstanding.

Confirmed, checked mine as well. No angle whatsoever, the insides of the lugs are 100% parallel.
 
Last edited:
  • Like
Reactions: WatchSmith.US

stufuse

Respected Member
22/10/17
3,659
2,454
113
UK
The bracelet is off of mine and I measured the inside edges of the lugs and am not seeing the taper you're referring to. Everything is 20.9mm no matter where I measure. Maybe I'm misunderstanding.

On the Gen? It’s straight on vsf


Sent from my iPhone using Tapatalk
 

stufuse

Respected Member
22/10/17
3,659
2,454
113
UK
[mention]muiramas [/mention] I might be getting my wires crossed and am now seeing something that’s not there.

Ignore me for now. Late night skim reading the tread after a long day, loool
 
Last edited:

StreetFighter

Insert Coin
4/9/20
2,880
3,455
113
I know we haven't seen a gen comparison yet but i'd bet that the case as as close to genuine as the VSF116610 is. To get this level of precision, it's obvious that the equipment they use is very sophisticated, I'd guess they 3d scan the genuine watch case (and all parts and movement parts too!) and print it out of a funky hi-tech lathe. So it would be reasonable to say that the case of the 126610 will be bang on! If the equipment didn't do its' job 'exactly', then the parts would not fit together?
Makes sense...(?)
 
Last edited:

sicilianu

I'm Pretty Popular
Certified
18/8/14
1,083
66
48
Hi guys can one of you upload a pic on the clasp.. from the TDs looks that the vsf clasp isn’t that great like the ARF v4 clasp.

Looks like the sel tightness is still a problem like on all other rep factories..


Skickat från min iPhone med RWI
 

sicilianu

I'm Pretty Popular
Certified
18/8/14
1,083
66
48
Hi guys can one of you upload a pic on the clasp.. from the TDs looks that the vsf clasp isn’t that great like the ARF v4 clasp.

Looks like the sel tightness is still a problem like on all other rep factories..


Sent from the RWI App
 

stufuse

Respected Member
22/10/17
3,659
2,454
113
UK
Hi guys can one of you upload a pic on the clasp.. from the TDs looks that the vsf clasp isn’t that great like the ARF v4 clasp.

Looks like the sel tightness is still a problem like on all other rep factories..


Sent from the RWI App

Sel tightness isn’t an issue


Sent from my iPhone using Tapatalk
 

Wasilij-2020

Do not accept unsolicited offers
19/1/21
13
8
0
The warranty card has the old Layout. I think its a vsf because of the rolex crone on the dial and on the clasp.