Vacheron Constantin Overseas 4500V BP vs the others

[SMP_lover]

I need some help from the guys who already own the watch. Could somebody check if the screwbar that is holding the bracelet at the case is unscrew-able. I won't be able to reproduce the quick release mechanism obviously, so to attach the strap you'll have to remove the bar, fit the strap into the slot and then secure the strap on case by slotting in the screwbar. Same as it's on the older VCO version by JJF.

 

[rcom440]

It looks like a screwbar.

I need some help from the guys who already own the watch. Could somebody check if the screwbar that is holding the bracelet at the case is unscrew-able. I won't be able to reproduce the quick release mechanism obviously, so to attach the strap you'll have to remove the bar, fit the strap into the slot and then secure the strap on case by slotting in the screwbar. Same as it's on the older VCO version by JJF.

 

[SMP_lover]

It looks like a screwbar.

I wonder if jjf straps fit the bp one, chances are slim but definitely worth a shot

 

[rcom440]

I wonder if jjf straps fit the bp one, chances are slim but definitely worth a shot

I don’t have BP but I’ve been told the cut out on BP is slightly smaller. Also, I’ve seen people putting strap made for that model ( with gen mesurments ) on JJF Overseas and there were approximately 2mm gaps in the cut out.
Someone should measure BP version.

 

[rypho1]

Liking this watch! Just put in an order.....

Just came in today

 

[direkcarlo]

Here's my Overseas 4500 BP:

http://imgur.com/a/RtGYVzx


My biggest gripe with the bracelet is the Quick Release function - ITS PURELY COSMETIC.
e.g. though there is a quick release, it doesn't even release! its just for looks and has zero function!

After wearing it for a month now, I have to admit it looks pretty damn good, but of course it will have its downsides.

Here are a few problems i have had with the BP:

- It has a loud rotor
- A screw holding down the rotor came off within the first 15 mins of use
- the last end link before the buckle is a few millimetres smaller than the rest (sucks if you have OCD)
- The Matlese cross isn't 100% accurate (maybe only 80-90% accurate)
- The sharp corners on the bezel
- One of the screw bars holding the endlinks in just came loose
- Winding the crown feels rough and icky
- I want to change the stainless steel bracelet but can't!!!!! - I can unscrew the bar holding the strap between the lugs, but I can't seem to totally remove it!

On the upside, this watch looks and feels like a million dollars. Even when I put it next to the other Gens like a Nautilus and a Royal Oak, it looks like its around the same price range. Even the watchsmiths I've taken it to all believed it was genuine until they opened it up and had a look inside!

 

[rypho1]

Here's my Overseas 4500 BP:

http://imgur.com/a/RtGYVzx


My biggest gripe with the bracelet is the Quick Release function - ITS PURELY COSMETIC.
e.g. though there is a quick release, it doesn't even release! its just for looks and has zero function!

I was sent some pics from TD when enquiring about the availabilty of this watch and he sent me a cople of pics to confirm they could get and ive notice the bracelet may have been updated. On the pics i was sent i can see a "stainless steel" and logo on inside of the bracelet

but on some TD;s pictures i dont see this marking

Also they sent this picture which seems to suggest you can use quick release? so wondered if yours had stainless steel marking as they may have changed things?

could be nothing but just noticed it wasnt the same bracelet on all sites showing the BP watch

 

[direkcarlo]

Yes those markings are present on my BP.

If the quick release is real, I wonder what I'm doing wrong?

 

[stoyania]

Yes those markings are present on my BP.

If the quick release is real, I wonder what I'm doing wrong?

my quick release function is not functional too

 

[direkcarlo]

Confirmed by the boys at Chazing Time, the quick release of the BP is purely cosmetic

 

[rypho1]

Confirmed by the boys at Chazing Time, the quick release of the BP is purely cosmetic

Awwww what a shame! oh well... as long as it looks pretty... ha! ill have a go at silencing the rotor aswell anyone know if the 3 screws seen on rotor actually hold the rotor down or is it just a cap hiding miyota screws underneath? like on jf AP 15400

 

[majwilliams0308]

Awwww what a shame! oh well... as long as it looks pretty... ha! ill have a go at silencing the rotor aswell anyone know if the 3 screws seen on rotor actually hold the rotor down or is it just a cap hiding miyota screws underneath? like on jf AP 15400

It's just pressed on based on my experience.

 

[rypho1]

It's just pressed on based on my experience.

Cheers mate

 

[mich.bal]

just saw this in the new arrivals section: https://www.intime03.co/vach-consta...dial-on-rg-bracelet-miyota-9015-to-a5100.html
what factory is it?

 

[majwilliams0308]

just saw this in the new arrivals section: https://www.intime03.co/vach-consta...dial-on-rg-bracelet-miyota-9015-to-a5100.html
what factory is it?

No idea on the factory but the bezel is larger and the font on the DW is bad, but the dial is a bit darker than BP. All told though, BP is still the best bet.

 

[PlastikMan]

How does the BP version compares to the JJF in relation to the one being closest to Gen?
thanks

 

[rypho1]

Look what just came in

First thoughts:

Looks fantastic and the blue really pops!!! definitely stands out...

Although i havent tried to take off straps completely the qucik release pins levers do oull down and appear to be spring mounted so i assume they work on mine anyway.

One negative though is bracelet is a little rattly..not as silky as AP JF 15400...sound makes it sound a little cheap but still looks great...

 

[mich.bal]

Look what just came in

First thoughts:

Looks fantastic and the blue really pops!!! definitely stands out...

Although i havent tried to take off straps completely the qucik release pins levers do oull down and appear to be spring mounted so i assume they work on mine anyway.

One negative though is bracelet is a little rattly..not as silky as AP JF 15400...sound makes it sound a little cheap but still looks great...

What version is it? Look amazing

 

[rypho1]

What version is it? Look amazing

its the BP version

Sent from the RWI App

 

[csthe]

It is true that in BPs the bezel is glued to the case and tend to fall?