Tudor Blue Pelagos XF v3 MY9015 Mod or Blue V6F Asia 2824?

[HardWorkOnly]

I've been on the hunt to purchase a super rep blue Tudor Pelagos recently and I cannot decide on the factory I want to purchase the watch from. The models that I've been looking at are XF/V6 v3 MY9015 Mod and V6F Asia 2824, any advice?

 

[cavernou5]

Eta version will have less rotor noise out of the box. Additionally leaves the option to upgrade to a swiss 2824 down the line

 

[Camblin]

XF & V6F are the same factory as far as I know. Cavernou5 is right about the rotor noise. A common complaint of the Miyota 9015 is how loud it is, quite noticeable apparently. Although I've read it's possible to quiet it with some oil. If I was in your shoes I'd go for the A2824 if possible.

 

[HardWorkOnly]

Do you think there are any main differences in flaws between these two watches? Does one have more than the other?

 

[thenut]

2824 is out no longer availiable afaik

 

[HardWorkOnly]

Trusty has the 2824

​​​​​​http://www.trustytime.biz/index.php?main_page=product_info&cPath=228&products_id=14814

 

[RobSe1]

http://www.trustytime.biz/index.php?main_page=product_info&cPath=228&products_id=18524

Trusty has the 2824

Thats Miyota 9015 - 2824 only from ZF.

 

[HardWorkOnly]

Thats Miyota 9015 - 2824 only from ZF.

Check this one out: http://www.trustytime.biz/index.php?main_page=product_info&cPath=228&products_id=14814

 

[RobSe1]

Check this one out: http://www.trustytime.biz/index.php?main_page=product_info&cPath=228&products_id=14814

Don‘t believe its still available. BetternShoot Andrew an Email if it‘s available.

 

[HardWorkOnly]

Don‘t believe its still available. BetternShoot Andrew an Email if it‘s available.

I sent him an email earlier today and he said he had it in stock. Should I go with this model?

 

[RobSe1]

I sent him an email earlier today and he said he had it in stock. Should I go with this model?

Great! Yes it‘s good to go. The 2824 is a good Movement. Factory is the same.

 

[fakeprophet]

I sent him an email earlier today and he said he had it in stock. Should I go with this model?

I sent him an email today. No luck for me.

Sent from my ONEPLUS A5000 using Tapatalk

 

[HardWorkOnly]

I sent him an email today. No luck for me.

Sent from my ONEPLUS A5000 using Tapatalk

Huh... We told me otherwise, very strange. Something is up on his end.

 

[fakeprophet]

Huh... We told me otherwise, very strange. Something is up on his end.

You may have gotten the last one I suppose. Lucky!

Sent from my ONEPLUS A5000 using Tapatalk

 

[HardWorkOnly]

You may have gotten the last one I suppose. Lucky!

Sent from my ONEPLUS A5000 using Tapatalk

I wish...

 

[Smpfan]

Miyota watch has got much stronger lume.


Gesendet von iPhone mit Tapatalk Pro

 

[HardWorkOnly]

Miyota watch has got much stronger lume.


Gesendet von iPhone mit Tapatalk Pro

Even with the loud rotor, should I still go with this watch?

 

[Smpfan]

I would go with the eta movement. BTW I have got a blue one with eta...
You can always easyly regulate the eta. Miyota not. You need much more experience and patience because there isn‘t any fine adjustment system. And it‘s louder. And eta spare parts or complete movements are always available. Miyota is more difficult.

My advice: Go with eta.



Gesendet von iPhone mit Tapatalk Pro

 

[HardWorkOnly]

I would go with the eta movement. BTW I have got a blue one with eta...
You can always easyly regulate the eta. Miyota not. You need much more experience and patience because there isn‘t any fine adjustment system. And it‘s louder. And eta spare parts or complete movements are always available. Miyota is more difficult.

My advice: Go with eta.



Gesendet von iPhone mit Tapatalk Pro

ETA isn't available anymore, what do you suggest?

 

[applestooranges]

The blue pelages does pop up once in a while on the M2M although it usually gets snapped up pretty fast, so there's that option if you're really adamant on the A2824. In my experience with my 9015, a little oil can totally eliminate the sound. Or since it is a closed caseback, you could freeze or remove the rotor if its really bugging you.