• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

The "Who Has the Best Hulk" Review

Elviscocho

Active Member
Certified
24/8/16
235
45
28
b9c1a92df0b166f0874d156ff31cc11f.jpg



Sent from my iPhone using Tapatalk
 

Stanco1

Getting To Know The Place
15/2/16
59
2
8
Received my zf hulk earlier last week. Here is a side by side with the regmariner hulk I got about 5 years ago.

indoor lighting


next to the window with sunlight



overall, the zf hulk is definitely a major upgrade over the regmariner but there are two issues I am facing.

1) the "white" on the hands and hour markers feel different and i cannot unsee it now.
2) there are two screws on the zf bracelet that I have issued with. one of the screw cannot be unscrewed and the other screw cannot be pulled out. any tips on what I should do?

 

Pezzie1

Getting To Know The Place
15/9/20
79
90
0
Received my zf hulk earlier last week. Here is a side by side with the regmariner hulk I got about 5 years ago.

indoor lighting


next to the window with sunlight



overall, the zf hulk is definitely a major upgrade over the regmariner but there are two issues I am facing.

1) the "white" on the hands and hour markers feel different and i cannot unsee it now.
2) there are two screws on the zf bracelet that I have issued with. one of the screw cannot be unscrewed and the other screw cannot be pulled out. any tips on what I should do?


Try a pair of pliers to pull the screw out. It must have a slightly blurred end that’s preventing it from coming out????
Be gentle

The other screw might come out if you put a bit of oil in the gaps of the bracelet link and move it around a bit and let gravity do it’s work for a few minutes. Then try unscrewing it again. Hopefully they didn’t use glue to hold it in haha


Sent from my iPhone using Tapatalk
 

Stanco1

Getting To Know The Place
15/2/16
59
2
8
Try a pair of pliers to pull the screw out. It must have a slightly blurred end that’s preventing it from coming out????
Be gentle

The other screw might come out if you put a bit of oil in the gaps of the bracelet link and move it around a bit and let gravity do it’s work for a few minutes. Then try unscrewing it again. Hopefully they didn’t use glue to hold it in haha


Sent from my iPhone using Tapatalk

thought of using pliers too, but was afraid i might damage it. but yeah, will buy a bottle of baby oil and try to soak it tomorrow.

hopefully all will be good after that.
 

burkul

Do not accept unsolicited offers
3/1/22
8
2
3
VSF very good for sure, but usually bad rehaut. Like this one. what you think?
 

Tobel

Respected Member
6/7/17
5,456
3,673
113
thought of using pliers too, but was afraid i might damage it. but yeah, will buy a bottle of baby oil and try to soak it tomorrow.

hopefully all will be good after that.

I had the same problem as you and ended up damaging a couple of links :(

Do try the baby oil and/or heating the bracelet it may help. Hopefully you'll do better than I did ;)
 
  • Like
Reactions: Stanco1

dragon07

Getting To Know The Place
7/6/20
85
9
8

Is this a VSF? Serial number S39. tags are different. I requested a photo of the mechanism for confirmation.
 

mac83

Active Member
9/7/13
211
35
28
I have ordered a VSF hulk from Lucy from the post raid batch, my friend has a gen which i will get a hold of to do a comparison, I only have an iphone camera so will do my best to capture the shots.
 
  • Like
Reactions: Tijdwijzer

Tijdwijzer

Renowned Member
24/11/20
959
596
93
Europe
dragon07 if you cant trust your dealer/seller, you shouldnt buy this in the first place. stick to the TD's. they're called TD for a reason. VSF is in stock atm.
 
  • Like
Reactions: wolfiqar