-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
"The Official Big Crown Club" - post your pics!
- Thread starter GC
- Start date
"The Official Big Crown Club" - post your pics!
Early bird shift
Sent from my iPhone using Tapatalk
Early bird shift
Sent from my iPhone using Tapatalk
Last edited:
lucadotti
Getting To Know The Place
Update on my 6538. I've chamfered the edges of the case. First time moving metal.
Back in the BC club after a very long time without one.
Your watch looks lovely - I was curious what sort of crystal you have on? I have the same base watch with the Silix case and currently have a tropic 21 from Sternkreuz, but I would love that sort of high, high protruding crystal look instead.
Additionally, how were you able to brass the bezel? I’ve been trying to temper mine in a toaster oven and it’s only a very light straw yellow color, not sure if you’re plating it in some way. Thanks!
Sent from my iPhone using Tapatalk
It is a Tropic 39 crystal.
The Bezel: I lightly sanded it. Then hit it with that mini blow torch, holding it with a tweezers. Then I baked it in the oven for a little.
Last edited:
- 19/3/16
- 931
- 883
- 93
Sent from my iPhone using Tapatalk
Hello, New to the club {and forum.}
Recently purchased 6538 big crown with a bit of history; I purchased from Jbobwalton from an Dizzy inception.
Original links below:
Rolex Big Crown Submariner 6538 James Bond - Replica Watch Info (replica-watch.info) maison888
[UK] Rolex 6538 big crown ‘James bond’ submariner- Silix case/ decal dial/ A2836 - Replica Watch Info (replica-watch.info)
Latest modifications/improvements by deadpan
Movement changed to A2836
Raffles Brass movement ring
‘Tudor’ rotor
Raffles red triangle insert
Athaya pip (‘lumed’ to match hands)
Decal dial (true gilt effect) hand made by Briteling
Matte texture applied (matte lacquer) to dial
Chamfers cut
Bezel brassed, and bezel spring modded to stiffen the action.
End links tweaked to fit well after fat spring bars installed
HR hands
Final assembly & lugs drilled for fat spring bars by ado213
Athaya crown
Recently purchased 6538 big crown with a bit of history; I purchased from Jbobwalton from an Dizzy inception.
Original links below:
Rolex Big Crown Submariner 6538 James Bond - Replica Watch Info (replica-watch.info) maison888
[UK] Rolex 6538 big crown ‘James bond’ submariner- Silix case/ decal dial/ A2836 - Replica Watch Info (replica-watch.info)
Latest modifications/improvements by deadpan
Movement changed to A2836
Raffles Brass movement ring
‘Tudor’ rotor
Raffles red triangle insert
Athaya pip (‘lumed’ to match hands)
Decal dial (true gilt effect) hand made by Briteling
Matte texture applied (matte lacquer) to dial
Chamfers cut
Bezel brassed, and bezel spring modded to stiffen the action.
End links tweaked to fit well after fat spring bars installed
HR hands
Final assembly & lugs drilled for fat spring bars by ado213
Athaya crown
LuminorReptar
RepTime BST Mod
Don’t post much.
Thought I’d contribute.
Phong Case
Crown art bezel
Slay Hands
Gen 1030 movement
MQ dial
Thought I’d contribute.
Phong Case
Crown art bezel
Slay Hands
Gen 1030 movement
MQ dial
So many nice big crowns!
I like to build one and looking for a case to modify. Silex once had it () but the store doesn't work anymore. Can someone please recommend a shop/user source to buy a case?
I like to build one and looking for a case to modify. Silex once had it () but the store doesn't work anymore. Can someone please recommend a shop/user source to buy a case?
OK, I didn't get any answer by sending him PM or use the contact form at the webshop. How did you bought your case? From the website?
I just emailed them with a picture of the case I was interested in and they replied within a few days.
JRSub
Known Member
- 20/10/21
- 139
- 108
- 43
Yesterday I got my Silix case for a 6538 and I just put everything together. The case is very hight so that I turned off some of the bottom with the lathe. Just 1.5 mm - and it is still very hight.
Current build:
The position of the crown is not in the middle. It is close to the botton. Are there other cases that have a more-in-the-middle position?
Here are some pictures:
Current build:
- Silix case 6538
- Silix insert and bezel
- Big Crown from raffel
- Dial and gold hands from raffel
- Swiss ETA 2836 movement
- Bleaching the insert
- changing the plexi to a flat pexi
- thrilling bigger holes for bracelet mount
The position of the crown is not in the middle. It is close to the botton. Are there other cases that have a more-in-the-middle position?
Here are some pictures:
Kr guy
Renowned Member
Can i join?
Planning to build a budget silix 6538
And waiting for raffles dial,rivet bracelet, gold hands, tropical 39glass, athaya crown and tube and while mean time
i aged and plated bezel with brass on standard 6538
+dial is for practicing not too serious