• Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!

Pam 1412 Navy

locvs

Active Member
Certified
7/12/20
397
417
63
Germany
44mm
P9010
Closed caseback
Finishing on the case is a bit of a challenge

Chances VSF/SBF will make this one are good!
 
  • Like
Reactions: mpp and Karlchen

KOT1917

Respected Member
Section Moderator
26/7/19
3,396
5,551
113
Russian federation
In short, it turned out pretty good overall.
Of the rough stuff, I would note that they painted not only the "leaf" of the second hand yellow again, but also the leg up to the middle. I haven't seen it in person, but I suspect that the green lume is more "lime" again, as it was on the PAM961 VSF. The finish is not as skillful, and in most photos it seems darker, but this doesn't seem critical, given that the satin finish is correctly applied to all parts. The only thing is that VSF should have left the same paint on the CG pins and roller, and also cleaned the CG lever on the sides, not just on the outer part. Otherwise, I don't see any big problems, although I should at least get my hands on the GEN to evaluate the finish.