Just found this announcement from HWF. The picture is probably a Gen. Nice model.
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
Pam 1342 HWF
- Thread starter JayBee0815
- Start date
Yes, that's right, GEN promo photo as always. I would be glad if this time they do not start with white hands, but immediately move on to polished ones.
I'm sure you'll like it @johnlogan !
I'm sure you'll like it @johnlogan !
hope there will be the original strap (gray +red luna rossa typo)
then... this model is quite nice, but i've a conceptual problem : luna rossa is supposed to a sailing universe, while luminor is more a "city" watch
PAM should have be more creatve there, like previous blacky collection : use some white sails material?
then... this model is quite nice, but i've a conceptual problem : luna rossa is supposed to a sailing universe, while luminor is more a "city" watch
PAM should have be more creatve there, like previous blacky collection : use some white sails material?
Here comes a teaser picture of the Gen ;-)
I am curious about the HWF version. The Gen is 15mm thick, so the HWF will probably not be much too thick with their 7750-Solution. As the Gen has a screwed strap change system this also will be no problem. Unfortunately the Gen has a pressed caseback. I hate these casebacks, so whatever HWF will do, it is wrong - either a genlike rubbish pressed caseback or a better but not genlike screwed one
I am curious about the HWF version. The Gen is 15mm thick, so the HWF will probably not be much too thick with their 7750-Solution. As the Gen has a screwed strap change system this also will be no problem. Unfortunately the Gen has a pressed caseback. I hate these casebacks, so whatever HWF will do, it is wrong - either a genlike rubbish pressed caseback or a better but not genlike screwed one
I am the canary in the Rep-Coal-Mine ;-)
I just ordered this one and I will make a review when it arrives.
I just ordered this one and I will make a review when it arrives.
- 9/12/18
- 2,366
- 9,455
- 113
Panerai are doing pressed in casebacks now...? That has to rank up there with the strap spring bars they used for some models.
I'll let our resident lab rat @JayBee0815 test this one first
I'll let our resident lab rat @JayBee0815 test this one first
Harsh but fairPanerai are doing pressed in casebacks now...? That has to rank up there with the strap spring bars they used for some models.
I'll let our resident lab rat @JayBee0815 test this one first
Very interested in this and JBs feedback, I need to pad out the collection with more 44mm Betti cases..
Well, first of all, I guess rep will use 6497 while gen will use P.6000.
GEN models are 13.05mm while rep should be around 15mm like standard OP.I/II/X/XI, but this is for all models, including those that were made before, starting with PAM1085, for example.
Secondly, this model should be on screw rods, not on QSC, as far as I know.
Finally, according to the latest, this is not a flapper cover, but the so-called driven caseback, as on all the latest models. It twists under pressure at a certain angle. Thus, you can reverse that all these casebacks are always engraved in the same direction. Flapper lids do not have edges, and are simply round.
For the rest - everything is.
GEN models are 13.05mm while rep should be around 15mm like standard OP.I/II/X/XI, but this is for all models, including those that were made before, starting with PAM1085, for example.
Secondly, this model should be on screw rods, not on QSC, as far as I know.
Finally, according to the latest, this is not a flapper cover, but the so-called driven caseback, as on all the latest models. It twists under pressure at a certain angle. Thus, you can reverse that all these casebacks are always engraved in the same direction. Flapper lids do not have edges, and are simply round.
For the rest - everything is.
Here are the QCs of of the resident lab rat ;-)
All in all this doesn't look like a quality Rep
All in all this doesn't look like a quality Rep
Last edited:
Thanks, my fault ;-)
Somehow I thought it is an Automatic. But of course it's a manual wind, so a 6497 with 21.6k is the logical choice. Joshs photos are much better than the ones from my dealer.
I’m on the list at Panerai for the genuine. The rep doesn’t use the thinner profile case set (same as the 510 etc). I own a gen 1084 which is the same sister set up. It’s very thin.
When you look at side perspective you can see, it has a sandwich dial ... but a rather bad one ;-)
But come on, it has an AAA-Price and you get what you pay for
I ordered it "blind" and now i have to take it. That´s ok. A nice watch for gardening and if I am tired of her, I will sell her for a fortune on Facebook ... Ooooops, have I said that?
- 9/12/18
- 2,366
- 9,455
- 113
Looks like a sausage sandwich to me....
Regardless - I do admire your attitude JB! We should remember that while super reps are the ultimate prize, these are also just fun and cheap watches.
Thewatchwolf
Renowned Member
I was eyeing this. If SBF / VSF makes this one then I am all in. Although, we really need SBF to drop a new super clone movement.