-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
pam 111 stopped
- Thread starter ja14
- Start date
Yeah, it looks like the micrometric screw is missing on your movement. Put the watch over an area where you would be able to see if something falls out, like some piece of dark cloth. Give the watch a few shakes.
@ja14 this is your qc pic you posted when you got the watch, 
you can just see the micro adjust screw / pin and that's what is most likely causing the problems now because yout latest picture is not showing it now look at the red arrows below
It be jammed somewhere in the orange circle below
if you lucky if you have a cloth placed on a table and flip the watch over and give it a slight shake it may come unstuck and fall on the cloth
If you not lucky contact a watch repairer to get it sorted
being it's a used watch and nearly 2 months old I don't know if a TD problem or not, and all the hassle of China and back costs involved
you can just see the micro adjust screw / pin and that's what is most likely causing the problems now because yout latest picture is not showing it now look at the red arrows below
It be jammed somewhere in the orange circle below
if you lucky if you have a cloth placed on a table and flip the watch over and give it a slight shake it may come unstuck and fall on the cloth
If you not lucky contact a watch repairer to get it sorted
being it's a used watch and nearly 2 months old I don't know if a TD problem or not, and all the hassle of China and back costs involved
Seems to be common with the latest batch of Noob's that the micro set screws fall out. Mine was hanging on by only a few threads when it arrived. Promptly loctited it and set it in properly when regulating the watch.
Alright sorry for being totally ignorant but I’m lookin and I still don’t really see where exactly the screw is that isn’t there now
I got it now sorry, I tried shaking nothing came out, Intime offered for me to send it back for them to fix. You guys think I should go somewhere local?
- 3/8/17
- 2,273
- 15,135
- 113
I have had the same issue with my 111. Suddenly stopped working on his first day. I wound it fully and no movement. Had a few hard shakes and the seconds hand started moving.
The 6947 is a robust movement and doesn't hack. How long have you had the watch? If you can open the case back, I'd suggest you look for any loose or missing screws. Apparently there have been a few of these issues recently. Granted, this is a popular movement so for every one issue there are probably a thousand running fine.
Is this the same movement for 411 as my is starting to stick when winding. I've stopped using it. Maybe the screw has come out and is getting jammed. Will need to open up and check it out.
Sent from my iPhone using RWI
Sent from my iPhone using RWI
Happened to me. It was the MM screw. I didn’t see it with the CB removed. Once I removed the movement, it came out. Loctite and patience when I put it back in.
- 3/8/17
- 2,273
- 15,135
- 113
I received the watch last night and today mid afternoon stopped. Haven’t had the opportunity to open the case back yet. Do you suggest tightening the screws?
Check and be sure they are all present. If any are missing, wait until it runs doesn't and then try to shake them out. If all are present, again, wait until it runs down and be sure they are snug. It should start running after a couple of turns of crown and continue until it's unwound. You should not have to tap it to get it started.
yeah i dont see anything with CB removed, shook it pretty good for a while nothing fell out and still no success,, is taking the movement out easy? do you have a link that shows how to do this or should i take to a pro/send it back