Got the QC of the latest batch ZF Hulk.
Are the SEL gaps acceptable? Does an amplitude of 226 to be rather on the low side for the 3135?
Any comments are welcome.
Can you post more QC?
-
Tired of adverts on RWI? - Subscribe by clicking HERE and PMing Trailboss for instructions and they will magically go away!
One Day Late - ZF 116610 LV & LN
- Thread starter puretime
- Start date
Can you post more QC?
mari115
Respected Member
Seems cool, the crystal looks just like the VSF's one, by the reflection on the bottom of the cyclops
Took it for a spin today. Hands look really good to me.
Sent from my iPhone using Tapatalk
Fucked up gap between sel and rest of bracelet. Same on my zf ???? need arf bracelet
Sent from my iPhone using Tapatalk
Just got the ZF Hulk in.
It looks great, though when locking down the crown from the 1st position it also does the winding action onto the movement, it supposed not to be under normal circustances.
Does this mean the winding stem is being too long or too short?
KJ2020 Do you have any idea what is the problem? Thanks.
It looks great, though when locking down the crown from the 1st position it also does the winding action onto the movement, it supposed not to be under normal circustances.
Does this mean the winding stem is being too long or too short?
KJ2020 Do you have any idea what is the problem? Thanks.
I have found out the problem actually comes from the crown itself. When the spring inside the crown is compressed, the little end is supposed to turn freely, but in this case it is stuck so it will take on the winding action when you screw the crown down.
Change to a normal functioning crown will solve the problem.
Last edited:
No, you can't remove the spring inside the crown.
You can check with TD's if they can supply you a new crown.
mrlemonjello
Known Member
- 22/4/20
- 111
- 26
- 28
A newb question, but i haven’t seen it in the zillion or so posts I’ve scoured…
You know how some folks are bothered by CG and lug shape, bracelet bend angle, etc…? I get bothered by center link edges that can shave your fingernails.
I’ve gone through models by VSF, ARF and Noob hoping not to get this, but it doesn’t seem to be something that gets addressed by the rep makers. Is the ZF 116610 any better in this respect?
I may eventually have to buy a tool to disassemble the bracelets, so that i can chamfer the links, unless someone offers this as a service. I’ve just been switching them out with Everest rubber straps.
This is the area I’m talking about. Usually pretty sharp. The outside edges are never a problem, but I can literally trim my nails on the inside by sliding them horizontally across the bracelet.
You know how some folks are bothered by CG and lug shape, bracelet bend angle, etc…? I get bothered by center link edges that can shave your fingernails.
I’ve gone through models by VSF, ARF and Noob hoping not to get this, but it doesn’t seem to be something that gets addressed by the rep makers. Is the ZF 116610 any better in this respect?
I may eventually have to buy a tool to disassemble the bracelets, so that i can chamfer the links, unless someone offers this as a service. I’ve just been switching them out with Everest rubber straps.
This is the area I’m talking about. Usually pretty sharp. The outside edges are never a problem, but I can literally trim my nails on the inside by sliding them horizontally across the bracelet.
A newb question, but i haven’t seen it in the zillion or so posts I’ve scoured…
You know how some folks are bothered by CG and lug shape, bracelet bend angle, etc…? I get bothered by center link edges that can shave your fingernails.
I’ve gone through models by VSF, ARF and Noob hoping not to get this, but it doesn’t seem to be something that gets addressed by the rep makers. Is the ZF 116610 any better in this respect?
I may eventually have to buy a tool to disassemble the bracelets, so that i can chamfer the links, unless someone offers this as a service. I’ve just been switching them out with Everest rubber straps.
This is the area I’m talking about. Usually pretty sharp. The outside edges are never a problem, but I can literally trim my nails on the inside by sliding them horizontally across the bracelet.
I just got in a ZF Sub. I can tell you it is not anything better in terms of bracelet edge/midlink sharpness. The outer edges of the ZF band is pretty sharp too which is actually kinda cutting my wrist.
mari115
Respected Member
A newb question, but i haven’t seen it in the zillion or so posts I’ve scoured…
You know how some folks are bothered by CG and lug shape, bracelet bend angle, etc…? I get bothered by center link edges that can shave your fingernails.
I’ve gone through models by VSF, ARF and Noob hoping not to get this, but it doesn’t seem to be something that gets addressed by the rep makers. Is the ZF 116610 any better in this respect?
I may eventually have to buy a tool to disassemble the bracelets, so that i can chamfer the links, unless someone offers this as a service. I’ve just been switching them out with Everest rubber straps.
This is the area I’m talking about. Usually pretty sharp. The outside edges are never a problem, but I can literally trim my nails on the inside by sliding them horizontally across the bracelet.
my genuine one is just as sharp as my rep vsf, it's not a problem
mrlemonjello
Known Member
- 22/4/20
- 111
- 26
- 28
That's kind of disappointing. I've had good luck with the outer edges so far, but I typically do a fair amount of refinishing like a lunatic when the watches arrive. Just can't get in between the links.
mrlemonjello
Known Member
- 22/4/20
- 111
- 26
- 28
Thanks for letting me know that. It's been a good amount of time since I held a gen oyster bracelet, and I never actually ran my fingernails across the links. The VSF Sub was definitely better than my ARF GMT, but still sharper than I had expected. Though the GMT has polished center links, which may play a part. I should check out an AD so that I have a better frame of reference.
Hey Leute,
mich bin recht neu hier und das ist meine zweite Bestellung.
Ich habe die QC Bilder von meiner ZF sub bekommen. Nun meine Frage aben die das Ziffernblatt getauscht? Die
Schriftart des „ft“ ist nun anders als vor den Razzien oder täusche ich mich? Bei den TD Webseiten haben die die aktuelle Version der Schriftart
Liebe Grüße
mich bin recht neu hier und das ist meine zweite Bestellung.
Ich habe die QC Bilder von meiner ZF sub bekommen. Nun meine Frage aben die das Ziffernblatt getauscht? Die
Schriftart des „ft“ ist nun anders als vor den Razzien oder täusche ich mich? Bei den TD Webseiten haben die die aktuelle Version der Schriftart
Liebe Grüße
Sorry guys, I'm quite new here and this is my second order. I got the QC pictures from my ZF sub. Now my question about changing the dial? The The font of the "ft" is now different than it was before the raids or am I mistaken? The TD websites have the current version of the font best regards
The question was if someone knows that ZF has a new dial font because the font is now a other font, on the td website pictures from which I ordered they have the 2021 font (big F in the „ft“) and the question is if has something to do with the raids maybe other dealer for the dial